Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 145, Issue 6

June 2023

Previous Issue
Next Issue

ISSN 0889-504X

EISSN 1528-8900

In this Issue

Research Papers

Research Papers

Response of Separated Boundary Layers to Steady and Pulsated Flow Injection

Hunter D. Nowak, Federico Lluesma-Rodriguez, Iman Rahbari, John P. Clark, Guillermo Paniagua

J. Turbomach. June 2023, 145(6): 061001. doi: https://doi.org/10.1115/1.4056184

Abstract

View articletitled, Response of Separated Boundary Layers to Steady and Pulsated Flow Injection

Open the PDF for in another window

Topics: Flow (Dynamics) , Flow control , Pressure , Separation (Technology) , Reynolds-averaged Navier–Stokes equations

Experimental Subsonic Flutter of a Linear Turbine Blade Cascade With Various Mode Shapes and Chordwise Torsion Axis Locations

Petr Eret, Volodymyr Tsymbalyuk

J. Turbomach. June 2023, 145(6): 061002. doi: https://doi.org/10.1115/1.4056204

Abstract

View articletitled, Experimental Subsonic Flutter of a Linear Turbine Blade Cascade With Various Mode Shapes and Chordwise Torsion Axis Locations

Open the PDF for in another window

Topics: Blades , Cascades (Fluid dynamics) , Flutter (Aerodynamics) , Mode shapes , Torsion , Stability

Experimental Study of Film Cooling With Favorable and Adverse Pressure Gradients

Ralph J. Volino, Matthew C. Gillcrist

J. Turbomach. June 2023, 145(6): 061003. doi: https://doi.org/10.1115/1.4056205

Abstract

View articletitled, Experimental Study of Film Cooling With Favorable and Adverse Pressure Gradients

Open the PDF for in another window

Topics: Boundary layers , Film cooling , Flow (Dynamics) , Jets , Pressure gradient , Temperature , Heat transfer , Turbulence

Influence of Purge Flow Injection on the Performance of an Axial Turbine With Three-Dimensional Airfoils and Non-Axisymmetric Endwall Contouring

Lukas Schäflein, Johannes Janssen, Henri Brandies, Peter Jeschke, Stephan Behre

J. Turbomach. June 2023, 145(6): 061004. doi: https://doi.org/10.1115/1.4056238

Abstract

View articletitled, Influence of Purge Flow Injection on the Performance of an Axial Turbine With Three-Dimensional Airfoils and Non-Axisymmetric Endwall Contouring

Open the PDF for in another window

Topics: Flow (Dynamics) , Rotors , Turbines , Stators , Probes

Numerical Study of Crossflow Effects on Discharge Coefficient of the Converging Slot Hole

Qingzong Xu, Guangyao Xu, Qiang Du, Dawei Chen, Haoyang Liu, Hongye Li

J. Turbomach. June 2023, 145(6): 061005. doi: https://doi.org/10.1115/1.4056302

Abstract

View articletitled, Numerical Study of Crossflow Effects on Discharge Coefficient of the Converging Slot Hole

Open the PDF for in another window

Topics: Compressible flow , Coolants , Discharge coefficient , Film cooling , Flow (Dynamics) , Mach number , Pressure

LES-CHT for a Rotating Cavity With Axial Throughflow

Tom Hickling, Li He

J. Turbomach. June 2023, 145(6): 061006. doi: https://doi.org/10.1115/1.4056091

Abstract

View articletitled, LES-CHT for a Rotating Cavity With Axial Throughflow

Open the PDF for in another window

Topics: Cavities , Disks , Flow (Dynamics) , Fluids , Heating , Temperature

Calculating Cooled Turbine Efficiency With Weighted Cooling Flow Distributions

Reid A. Berdanier

J. Turbomach. June 2023, 145(6): 061007. doi: https://doi.org/10.1115/1.4056471

Abstract

View articletitled, Calculating Cooled Turbine Efficiency With Weighted Cooling Flow Distributions

Open the PDF for in another window

Topics: Cooling , Flow (Dynamics) , Pressure , Turbines

Experimental and Numerical Investigation of High Load Turbine Blade Tip Cavity Structures

Yingjie Chen, Dengyu Jiang, Zhengshuai Du, Songtao Wang

J. Turbomach. June 2023, 145(6): 061008. doi: https://doi.org/10.1115/1.4056512

Abstract

View articletitled, Experimental and Numerical Investigation of High Load Turbine Blade Tip Cavity Structures

Open the PDF for in another window

Topics: Blades , Cavities , Clearances (Engineering) , Flow (Dynamics) , Flow visualization , Leakage , Leakage flows , Pressure , Suction , Vortices

Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge

Huihui Wang, Qinghua Deng, Wei He, Zhenping Feng

J. Turbomach. June 2023, 145(6): 061009. doi: https://doi.org/10.1115/1.4056513

Abstract

View articletitled, Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge

Open the PDF for in another window

Topics: Blades , Cooling , Flow (Dynamics) , Coolants , Composite materials

Vane–Probe Interactions in Transonic Flows

Antonino Federico Maria Torre, Marios Patinios, Gustavo Lopes, Loris Simonassi, Sergio Lavagnoli

J. Turbomach. June 2023, 145(6): 061010. doi: https://doi.org/10.1115/1.4056578

Abstract

View articletitled, Vane–Probe Interactions in Transonic Flows

Open the PDF for in another window

Topics: Flow (Dynamics) , Probes , Pressure , Mach number , Calibration

On the Probabilistic Endurance Prediction Approach for Turbomachinery Blades and Vanes

Davendu Y. Kulkarni

J. Turbomach. June 2023, 145(6): 061011. doi: https://doi.org/10.1115/1.4056511

Abstract

View articletitled, On the Probabilistic Endurance Prediction Approach for Turbomachinery Blades and Vanes

Open the PDF for in another window

Topics: Airfoils , Blades , Compressors , Damping , Design , Friction , High cycle fatigue , Simulation , Stress , Turbomachinery

The Effects of Hub Profile on the Aerodynamics of Integrated Intermediate Turbine Ducts

Jiangdong Hou, Chao Zhou

J. Turbomach. June 2023, 145(6): 061012. doi: https://doi.org/10.1115/1.4056580

Abstract

View articletitled, The Effects of Hub Profile on the Aerodynamics of Integrated Intermediate Turbine Ducts

Open the PDF for in another window

Topics: Computational fluid dynamics , Corners (Structural elements) , Ducts , Flow (Dynamics) , Pressure , Pressure gradient , Separation (Technology) , Turbines , Turbulence , Vortices

Investigation of a Novel Turbine Housing to Produce a Nonuniform Spanwise Flow Field at the Inlet to a Mixed Flow Turbine and Provide Variable Geometry Capabilities

Richard Morrison, Stephen Spence, Charles Stuart, Sung In Kim, Andre Starke, Thomas Leonard

J. Turbomach. June 2023, 145(6): 061013. doi: https://doi.org/10.1115/1.4056388

Abstract

View articletitled, Investigation of a Novel Turbine Housing to Produce a Nonuniform Spanwise Flow Field at the Inlet to a Mixed Flow Turbine and Provide Variable Geometry Capabilities

Open the PDF for in another window

Topics: Design , Flow (Dynamics) , Rotors , Turbines , Geometry

Lean-Burn Combustor Simulator for an Engine-Component Test Facility: An Experimental and Computational Study

Jonas Amend, Roderick Lubbock, Francesco Ornano, Thomas Povey

J. Turbomach. June 2023, 145(6): 061014. doi: https://doi.org/10.1115/1.4056387

Abstract

View articletitled, Lean-Burn Combustor Simulator for an Engine-Component Test Facility: An Experimental and Computational Study

Open the PDF for in another window

Topics: Combustion chambers , Computational fluid dynamics , Flow (Dynamics) , Pressure , Temperature , Coolants , Design , Engines , Simulation , Nozzle guide vanes

Aerodynamic Performance and Leakage Flow in Turbine Cascades With Sweeping Jet Actuators

Shaowen Chen, Weihang Li, Pengcheng Yang, Yueqi Liu

J. Turbomach. June 2023, 145(6): 061015. doi: https://doi.org/10.1115/1.4056579

Abstract

View articletitled, Aerodynamic Performance and Leakage Flow in Turbine Cascades With Sweeping Jet Actuators

Open the PDF for in another window

Topics: Actuators , Blades , Cascades (Fluid dynamics) , Clearances (Engineering) , Flow (Dynamics) , Leakage flows , Turbines , Pressure , Flow control

Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades

Brian F. Knisely, Reid A. Berdanier, Joel H. Wagner, Karen A. Thole, Allan N. Arisi, Charles W. Haldeman

J. Turbomach. June 2023, 145(6): 061016. doi: https://doi.org/10.1115/1.4056679

Abstract

View articletitled, Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades

Open the PDF for in another window

Topics: Blades , Cooling , Flow (Dynamics) , Temperature , Manufacturing , Turbine blades

Experimental Study of Impact of In-Service Deterioration on Aerodynamic Performance of High-Pressure Nozzle Guide Vanes

Mathias Michaud, Dougal Jackson, Frédéric Goenaga, Thomas Povey

J. Turbomach. June 2023, 145(6): 061017. doi: https://doi.org/10.1115/1.4056774

Abstract

View articletitled, Experimental Study of Impact of In-Service Deterioration on Aerodynamic Performance of High-Pressure Nozzle Guide Vanes

Open the PDF for in another window

Topics: Coolants , Film cooling , Flow (Dynamics) , Pressure , Surface roughness , Kinetic energy , Nozzle guide vanes , Engines , Spallation (Nuclear physics) , High pressure (Physics)

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Gradient-free aerodynamic optimization with structural constraints and surge line control for radial compressor stage

J. Turbomach

Effect of blockages on film effectiveness on the pressure surface of a turbine blade

J. Turbomach

Unsteadiness in the Secondary Flows of a High-Speed Low-Pressure Turbine Cascade with Unsteady Wakes and Purge Flow

J. Turbomach

Design and Analysis of a Liftfan for eVTOL Aircraft

J. Turbomach

An Active Turbulence Grid for Turbomachinery Flow Experiments

J. Turbomach (August 2025)

Research Papers

Response of Separated Boundary Layers to Steady and Pulsated Flow Injection

Experimental Subsonic Flutter of a Linear Turbine Blade Cascade With Various Mode Shapes and Chordwise Torsion Axis Locations

Experimental Study of Film Cooling With Favorable and Adverse Pressure Gradients

Influence of Purge Flow Injection on the Performance of an Axial Turbine With Three-Dimensional Airfoils and Non-Axisymmetric Endwall Contouring

Numerical Study of Crossflow Effects on Discharge Coefficient of the Converging Slot Hole

LES-CHT for a Rotating Cavity With Axial Throughflow

Calculating Cooled Turbine Efficiency With Weighted Cooling Flow Distributions

Experimental and Numerical Investigation of High Load Turbine Blade Tip Cavity Structures

Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge

Vane–Probe Interactions in Transonic Flows

On the Probabilistic Endurance Prediction Approach for Turbomachinery Blades and Vanes

The Effects of Hub Profile on the Aerodynamics of Integrated Intermediate Turbine Ducts

Investigation of a Novel Turbine Housing to Produce a Nonuniform Spanwise Flow Field at the Inlet to a Mixed Flow Turbine and Provide Variable Geometry Capabilities

Lean-Burn Combustor Simulator for an Engine-Component Test Facility: An Experimental and Computational Study

Aerodynamic Performance and Leakage Flow in Turbine Cascades With Sweeping Jet Actuators

Effects of Part-to-Part Flow Variations on Overall Effectiveness and Life of Rotating Turbine Blades

Experimental Study of Impact of In-Service Deterioration on Aerodynamic Performance of High-Pressure Nozzle Guide Vanes

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only