This paper presents a comprehensive study of the effect of shroud design in axial turbine aerodynamics. Experimental measurements and numerical simulations have been conducted on three different test cases with identical blade geometry and tip clearances but different shroud designs. The first and second test cases are representative of a full shroud and a nonaxisymmetric partial shroud geometry while the third test case uses an optimized partial shroud. Partial shrouds are sometimes used in industrial application in order to benefit from the advantage of shrouded configuration, as well as reduce mechanical stress on the blades. However, the optimal compromise between mechanical considerations and aerodynamic performances is still an open issue due to the resulting highly three-dimensional unsteady flow field. Aerodynamic performance is measured in a low-speed axial turbine facility and shows that there are clear differences between the test cases. In addition, steady and time resolved measurements are performed together with computational analysis in order to improve the understanding of the effect of the shroud geometry on the flow field and to quantify the sources of the resultant additional losses. The flow field analysis shows that the effect of the shroud geometry is significant from 60% blade height span to the tip. Tip leakage vortex in the first rotor is originated in the partial shroud test cases while the full shroud case presents only a weak indigenous tip passage vortex. This results in a significant difference in the secondary flow development in the following second stator with associated losses that varies by about 1% in this row. The analysis shows that the modified partial shroud design has improved considerably the aerodynamic efficiency by about 0.6% by keeping almost unchanged the overall weight of this component, and thus blade root stresses. The work, therefore, presents a comprehensive flow field analysis and shows the impact of the shroud geometry in the aerodynamic performance.
Skip Nav Destination
e-mail: luca.porreca@ch.manturbo.com
Article navigation
July 2008
Research Papers
Optimized Shroud Design for Axial Turbine Aerodynamic Performance
L. Porreca,
L. Porreca
Turbomachinery Laboratory,
e-mail: luca.porreca@ch.manturbo.com
Swiss Federal Institute of Technology
, CH-8092 Zurich, Switzerland
Search for other works by this author on:
A. I. Kalfas,
A. I. Kalfas
Turbomachinery Laboratory,
Swiss Federal Institute of Technology
, CH-8092 Zurich, Switzerland
Search for other works by this author on:
R. S. Abhari
R. S. Abhari
Turbomachinery Laboratory,
Swiss Federal Institute of Technology
, CH-8092 Zurich, Switzerland
Search for other works by this author on:
L. Porreca
Turbomachinery Laboratory,
Swiss Federal Institute of Technology
, CH-8092 Zurich, Switzerlande-mail: luca.porreca@ch.manturbo.com
A. I. Kalfas
Turbomachinery Laboratory,
Swiss Federal Institute of Technology
, CH-8092 Zurich, Switzerland
R. S. Abhari
Turbomachinery Laboratory,
Swiss Federal Institute of Technology
, CH-8092 Zurich, SwitzerlandJ. Turbomach. Jul 2008, 130(3): 031016 (12 pages)
Published Online: May 5, 2008
Article history
Received:
February 12, 2007
Revised:
March 6, 2007
Published:
May 5, 2008
Citation
Porreca, L., Kalfas, A. I., and Abhari, R. S. (May 5, 2008). "Optimized Shroud Design for Axial Turbine Aerodynamic Performance." ASME. J. Turbomach. July 2008; 130(3): 031016. https://doi.org/10.1115/1.2777187
Download citation file:
Get Email Alerts
The Cooling Effect of Combustor Exit Louver Scheme on a Transonic Nozzle Guide Vane Endwall
J. Turbomach (July 2025)
Aerodynamic Performance Evaluation of Subsonic Compressor Cascade Blade With Leading-Edge Damage
J. Turbomach (July 2025)
Thermohydraulic Performance and Flow Structures of Diamond Pyramid Arrays
J. Turbomach (July 2025)
Related Articles
Improving the
Performance of a Turbine With Low Aspect Ratio Stators by
Aft-Loading
J. Turbomach (July,2006)
Unsteady Flow Physics and Performance of a One-and- 1 ∕ 2 -Stage Unshrouded High Work Turbine
J. Turbomach (April,2007)
Impact of Time-Resolved Entropy Measurement on a One-and-One-Half-Stage Axial Turbine Performance
J. Turbomach (March,2012)
Secondary Flows and Loss Caused by Blade Row Interaction in a Turbine Stage
J. Turbomach (July,2006)
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Other Components and Variations
Axial-Flow Compressors
Introduction
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis