Compressible Flow Through Solar Power Plant Chimneys

Chimneys as tall as 1500 m may be important components of proposed solar chimney power plants. The exit air density will then be appreciably lower than the inlet density. The paper presents a one-dimensional compressible flow approach for the calculation of all the thermodynamic variables as dependent on chimney height, wall friction, additional losses, internal drag and area change. The method gives reasonable answers even over a single 1500 m step length used for illustration, but better accuracy is possible with multiple steps. It is also applicable to the rest of the plant where heat transfer and shaft work may be present. It turns out that the pressure drop associated with the vertical acceleration of the air is about three times the pressure drop associated with wall friction. But flaring the chimney by 14 percent to keep the through-flow Mach number constant virtually eliminates the vertical acceleration pressure drop. [S0199-6231(00)03003-3]