Volume 109 Issue 2 | J. Pressure Vessel Technol.

Topics: Design methodology , High temperature , Structural failures , Failure , Stress , ASME Standards , Cylinders , Deformation , Design , Inelastic analysis

Inelastic Buckling of Tubes Under Cyclic Bending

S. Kyriakides, P. K. Shaw

J. Pressure Vessel Technol. May 1987, 109(2): 169–178. doi: https://doi.org/10.1115/1.3264891

Abstract

View articletitled, Inelastic Buckling of Tubes Under Cyclic Bending

Open the PDF for in another window

Topics: Buckling , Aluminum , Stability , Steel

Creep Buckling Analyses of Circular Cylindrical Shells Under Axial Compression—Bifurcation Buckling Analysis by the Finite Element Method

N. Miyazaki

J. Pressure Vessel Technol. May 1987, 109(2): 179–183. doi: https://doi.org/10.1115/1.3264892

Abstract

View articletitled, Creep Buckling Analyses of Circular Cylindrical Shells Under Axial Compression—Bifurcation Buckling Analysis by the Finite Element Method

Open the PDF for in another window

Topics: Bifurcation , Buckling , Circular cylindrical shells , Compression , Creep , Finite element methods , Displacement

Plastic Strain Concentration in a Cylindrical Shell Subjected to an Axial or a Radial Temperature Gradient

H. Hu¨bel

J. Pressure Vessel Technol. May 1987, 109(2): 184–187. doi: https://doi.org/10.1115/1.3264893

Abstract

View articletitled, Plastic Strain Concentration in a Cylindrical Shell Subjected to an Axial or a Radial Temperature Gradient

Open the PDF for in another window

Topics: Pipes , Temperature gradient , ASME Standards , Fatigue analysis , Hardening , Kinematics

A New Technique for Approximating the Stress in Pad-Type Nozzles Attached to a Spherical Shell

T. Oikawa, T. Oka

J. Pressure Vessel Technol. May 1987, 109(2): 188–192. doi: https://doi.org/10.1115/1.3264894

Abstract

View articletitled, A New Technique for Approximating the Stress in Pad-Type Nozzles Attached to a Spherical Shell

Open the PDF for in another window

Topics: Nozzles , Spherical shells , Stress , Membranes , Boilers , Experimental design , Pressure , Pressure vessels , Yield stress

Tube-to-Tubesheet Joint Interfacing Pressure: Analysis and Experiments

S. Weinstock, K. Reinis, A. Soler

J. Pressure Vessel Technol. May 1987, 109(2): 193–199. doi: https://doi.org/10.1115/1.3264895

View articletitled, Tube-to-Tubesheet Joint Interfacing Pressure: Analysis and Experiments

Open the PDF for in another window

Topics: Pressure

On Some Performance Parameters for Closed Feedwater Heaters

K. P. Singh

J. Pressure Vessel Technol. May 1987, 109(2): 200–204. doi: https://doi.org/10.1115/1.3264896

Abstract

View articletitled, On Some Performance Parameters for Closed Feedwater Heaters

Open the PDF for in another window

Topics: Feedwater , Design , Thermodynamic power cycles , Vapors

Nonlinear Response of U-Tubes to a Differential Axial Movement Between Two Legs

N. V. Leˆ

J. Pressure Vessel Technol. May 1987, 109(2): 205–211. doi: https://doi.org/10.1115/1.3264897

Abstract

View articletitled, Nonlinear Response of U-Tubes to a Differential Axial Movement Between Two Legs

Open the PDF for in another window

Topics: Compression , Deflection , Heat exchangers , Rotation , Stress , Tension , Thermal expansion

The Impact of Tube Plugging on Closed Feedwater Heater Operation and Maintenance

F. H. Linley, Jr.

J. Pressure Vessel Technol. May 1987, 109(2): 212–218. doi: https://doi.org/10.1115/1.3264898

Abstract

View articletitled, The Impact of Tube Plugging on Closed Feedwater Heater Operation and Maintenance

Open the PDF for in another window

Topics: Feedwater , Maintenance , Failure , Corrective actions , Chemical processes , Chemistry , Damage , Failure mechanisms , Nondestructive evaluation , Probability

Strouhal Numbers for Heat Exchanger Tube Arrays in Cross Flow

D. S. Weaver, J. A. Fitzpatrick, M. ElKashlan

J. Pressure Vessel Technol. May 1987, 109(2): 219–223. doi: https://doi.org/10.1115/1.3264899

Abstract

View articletitled, Strouhal Numbers for Heat Exchanger Tube Arrays in Cross Flow

Open the PDF for in another window

Topics: Cross-flow , Heat exchangers , Flow (Dynamics) , Acoustics , Geometry , Resonance , Turbulence

Weld Investigation of Nuclear Power Plant Pressure Vessels

G. Itoh

J. Pressure Vessel Technol. May 1987, 109(2): 224–227. doi: https://doi.org/10.1115/1.3264900

Abstract

View articletitled, Weld Investigation of Nuclear Power Plant Pressure Vessels

Open the PDF for in another window

Topics: Nuclear power stations , Pressure vessels , Vessels , Acceptance criteria , ASME Boiler and Pressure Vessel Code , Damage , Relaxation (Physics) , Slags , Welded joints

Creep Damage in 17–12 SPH Stainless Steel Notched Specimens: Metallographical Study and Numerical Modeling

E. Contesti, G. Cailletaud, C. Levaillant

J. Pressure Vessel Technol. May 1987, 109(2): 228–235. doi: https://doi.org/10.1115/1.3264901

Abstract

View articletitled, Creep Damage in 17–12 SPH Stainless Steel Notched Specimens: Metallographical Study and Numerical Modeling

Open the PDF for in another window

Topics: Computer simulation , Creep , Damage , Stainless steel , Rupture , Stress , Computation , Cracking (Materials) , Fracture (Process) , Temperature

A Review of Methods of Equivalent Damping Estimation From Experimental Data

A. H. Hadjian, S. F. Masri, A. F. Saud

J. Pressure Vessel Technol. May 1987, 109(2): 236–243. doi: https://doi.org/10.1115/1.3264902

Abstract

View articletitled, A Review of Methods of Equivalent Damping Estimation From Experimental Data

Open the PDF for in another window

Topics: Damping , Piping systems , Approximation

Subspace Iteration for Eigen-Solution of Fluid-Structure Interaction Problems

I.-W. Yu

J. Pressure Vessel Technol. May 1987, 109(2): 244–248. doi: https://doi.org/10.1115/1.3264903

Abstract

View articletitled, Subspace Iteration for Eigen-Solution of Fluid-Structure Interaction Problems

Open the PDF for in another window

Topics: Fluid structure interaction , Algorithms , Displacement , Eigenvalues , Fluid pressure , Structural dynamics

Buckling of Oil Storage Tanks in SPPL Tank Farm During the 1979 Imperial Valley Earthquake

C.-F. Shih, C. D. Babcock

J. Pressure Vessel Technol. May 1987, 109(2): 249–255. doi: https://doi.org/10.1115/1.3264904

Abstract

View articletitled, Buckling of Oil Storage Tanks in SPPL Tank Farm During the 1979 Imperial Valley Earthquake

Open the PDF for in another window

Topics: Buckling , Earthquakes , Storage tanks , Roofs , American Petroleum Institute , Damage , Design , Excitation

Pressure Vessel and Piping Codes

Development of Design Criteria for a High Pressure Vessel Construction Code

G. J. Mraz

J. Pressure Vessel Technol. May 1987, 109(2): 256–259. doi: https://doi.org/10.1115/1.3264905

Abstract

View articletitled, Development of Design Criteria for a High Pressure Vessel Construction Code

Open the PDF for in another window

Topics: Construction , Design , High-pressure vessels , ASME Boiler and Pressure Vessel Code , Autofrettage , Deformation , Fatigue , Fittings , Fracture mechanics , High pressure (Physics)

Book Reviews

Handbook of Heat and Mass Transfer, Volumes One and Two

N. P. Cheremisinoff, Editor, J. A. Orozco, Reviewer

J. Pressure Vessel Technol. May 1987, 109(2): 260. doi: https://doi.org/10.1115/1.3264906

View articletitled, Handbook of Heat and Mass Transfer, Volumes One and Two

Open the PDF for in another window

Topics: Heat , Mass transfer

Handbook of Hydraulic Resistance, 2nd Edition

I. E. Idelchik, Author

J. Pressure Vessel Technol. May 1987, 109(2): 260–261. doi: https://doi.org/10.1115/1.3264907

View articletitled, Handbook of Hydraulic Resistance, 2nd Edition

Open the PDF for in another window

Aerothermodynamics of Low Pressure Steam Turbines and Condensers

M. J. Moore, Editor, C. H. Sieverding, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 261. doi: https://doi.org/10.1115/1.3264908

View articletitled, Aerothermodynamics of Low Pressure Steam Turbines and Condensers

Open the PDF for in another window

Topics: Aerodynamics , Condensers (steam plant) , Pressure , Steam turbines

The Chemical Engineering Guide to Heat Transfer (Volume I: Plant Principles, Volume II: Equipment)

K. J. McNaughton, Editor, The Staff of Chemical Engineering, Editors

J. Pressure Vessel Technol. May 1987, 109(2): 261. doi: https://doi.org/10.1115/1.3264909

View articletitled, The Chemical Engineering Guide to Heat Transfer (Volume I: Plant Principles, Volume II: Equipment)

Open the PDF for in another window

Topics: Chemical engineering , Heat transfer

Mechanical Design of Process Systems (Volume 2: Shell-and-Tube Heat Exchangers, Rotating Equipment, Bins, Silos, Stacks)

A. K. Escoe, Author

J. Pressure Vessel Technol. May 1987, 109(2): 261–262. doi: https://doi.org/10.1115/1.3264910

View articletitled, Mechanical Design of Process Systems (Volume 2: Shell-and-Tube Heat Exchangers, Rotating Equipment, Bins, Silos, Stacks)

Open the PDF for in another window

Topics: Design engineering , Heat exchangers , Shells

Computational Heat Transfer

Y. Jaluria, Author, K. E. Torrance, Author

J. Pressure Vessel Technol. May 1987, 109(2): 262. doi: https://doi.org/10.1115/1.3264911

View articletitled, Computational Heat Transfer

Open the PDF for in another window

Topics: Heat transfer

Heat Transfer in High Technology and Power Engineering

W.-J. Yang, Editor, Y. Mori, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 262–263. doi: https://doi.org/10.1115/1.3264912

View articletitled, Heat Transfer in High Technology and Power Engineering

Open the PDF for in another window

Topics: Energy engineering , Heat transfer

Heat Transfer and Fluid Flow in Rotating Machinery

W.-J. Yang, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 263. doi: https://doi.org/10.1115/1.3264913

View articletitled, Heat Transfer and Fluid Flow in Rotating Machinery

Open the PDF for in another window

Topics: Fluid dynamics , Heat transfer , Machinery

High Temperature Equipment

A. E. Sheindlin, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 263. doi: https://doi.org/10.1115/1.3264914

View articletitled, High Temperature Equipment

Open the PDF for in another window

Topics: High temperature

High Temperature Heat Exchangers

Y. Mori, Editor, A. E. Sheindlin, Editor, N. H. Afgan, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 264. doi: https://doi.org/10.1115/1.3264915

View articletitled, High Temperature Heat Exchangers

Open the PDF for in another window

Topics: Heat exchangers , High temperature

Managing Steam (An Engineering Guide to Commercial, Industrial and Utility Systems)

J. Makansi, Editor

J. Pressure Vessel Technol. May 1987, 109(2): 264. doi: https://doi.org/10.1115/1.3264916

View articletitled, Managing Steam (An Engineering Guide to Commercial, Industrial and Utility Systems)

Open the PDF for in another window

Topics: Steam

In Memoriam

Irwin Berman

A Tribute to the Late Irwin Berman

Research Papers

Assessment of Current High-Temperature Design Methodology Based on Structural Failure Tests

Inelastic Buckling of Tubes Under Cyclic Bending

Creep Buckling Analyses of Circular Cylindrical Shells Under Axial Compression—Bifurcation Buckling Analysis by the Finite Element Method

Plastic Strain Concentration in a Cylindrical Shell Subjected to an Axial or a Radial Temperature Gradient

A New Technique for Approximating the Stress in Pad-Type Nozzles Attached to a Spherical Shell

Tube-to-Tubesheet Joint Interfacing Pressure: Analysis and Experiments

On Some Performance Parameters for Closed Feedwater Heaters

Nonlinear Response of U-Tubes to a Differential Axial Movement Between Two Legs

The Impact of Tube Plugging on Closed Feedwater Heater Operation and Maintenance

Strouhal Numbers for Heat Exchanger Tube Arrays in Cross Flow

Weld Investigation of Nuclear Power Plant Pressure Vessels

Creep Damage in 17–12 SPH Stainless Steel Notched Specimens: Metallographical Study and Numerical Modeling

A Review of Methods of Equivalent Damping Estimation From Experimental Data

Subspace Iteration for Eigen-Solution of Fluid-Structure Interaction Problems

Buckling of Oil Storage Tanks in SPPL Tank Farm During the 1979 Imperial Valley Earthquake

Pressure Vessel and Piping Codes

Development of Design Criteria for a High Pressure Vessel Construction Code

Book Reviews

Handbook of Heat and Mass Transfer, Volumes One and Two

Handbook of Hydraulic Resistance, 2nd Edition

Aerothermodynamics of Low Pressure Steam Turbines and Condensers

The Chemical Engineering Guide to Heat Transfer (Volume I: Plant Principles, Volume II: Equipment)

Mechanical Design of Process Systems (Volume 2: Shell-and-Tube Heat Exchangers, Rotating Equipment, Bins, Silos, Stacks)

Computational Heat Transfer

Heat Transfer in High Technology and Power Engineering

Heat Transfer and Fluid Flow in Rotating Machinery

High Temperature Equipment

High Temperature Heat Exchangers

Managing Steam (An Engineering Guide to Commercial, Industrial and Utility Systems)

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

In Memoriam

Research Papers

Pressure Vessel and Piping Codes

Book Reviews

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only