In the design of medical devices, the use of numerical simulation, either with or without complementary experimentation, may lead to a more competent product. The experimentation in question may either be performed in vitro or in vivo. This paper conveys a case study in which the two methodologies, numerical simulation and in vitro experimentation used in tandem, enabled the evaluation of safety issues related to a heat-generating implant. The numerical simulation was implemented by means of ANSYS finite-element software employed in the transient mode. The experimental work provided information necessary for the execution of the simulation and, therefore, was performed as the first phase of the research. The implant is of the type that is equipped with a short-lived battery that requires intermittent recharging. The recharging is accomplished by means of an antenna that is externally mounted on the skin surface. The antenna is the primary of a transformer, and the implant contains the secondary of the transformer. During the recharging period of the battery, heat is generated in both the antenna and the implant. By the symbiotic use of the experimental results and the numerical simulation, time-dependent temperatures were determined in the tissue that is situated in the neighborhood of the implant and the antenna. These temperatures were evaluated from the standpoint of possible tissue damage.
Skip Nav Destination
Article navigation
Design Of Medical Devices Conference Abstracts
Numerical and Experimental Simulations as Symbiotic Tools for Solving Complex Biothermal Problems
Dianna Smith
Dianna Smith
University of Minnesota
Search for other works by this author on:
Ephraim Sparrow
University of Minnesota
John Abraham
University of Minnesota
Yilmaz Bayazit
University of Minnesota
Ryan Lovik
University of Minnesota
Dianna Smith
University of Minnesota
J. Med. Devices. Jun 2010, 4(2): 027536 (1 pages)
Published Online: August 11, 2010
Article history
Published:
August 11, 2010
Citation
Sparrow, E., Abraham, J., Bayazit, Y., Lovik, R., and Smith, D. (August 11, 2010). "Numerical and Experimental Simulations as Symbiotic Tools for Solving Complex Biothermal Problems." ASME. J. Med. Devices. June 2010; 4(2): 027536. https://doi.org/10.1115/1.3443759
Download citation file:
Get Email Alerts
Cited By
Validation of a Repurposed pH Monitoring Capsule for Cecal Applications Using Novel Synthetic Cecal Contents
J. Med. Devices (March 2025)
Related Articles
In-Vitro Tests of a Rapid, Stable-Temperature Recharging System for Implantable Batteries
J. Med. Devices (June,2010)
Wireless Recharging of Implanted Batteries via Ultrasound
J. Med. Devices (June,2009)
Modeling the Thermal Responses of the Skin Surface During Hand-Object Interactions
J Biomech Eng (April,2008)
3-D Finite-Element Models of Human and Monkey Fingertips to Investigate the Mechanics of Tactile Sense
J Biomech Eng (October,2003)
Related Proceedings Papers
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Human Thermal Comfort
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Key Components of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment