... OF MECHANICAL DESIGN . Manuscript received December 2000; Associate Editor: S. K. Agrawal. 01 December 2000 26 11 2002 kinematics graph theory rotating bodies displacement control mechanical engineering Application of graph theory to structural synthesis and analysis...

.... Handschuh. 01 November 2000 26 11 2002 rotating bodies CAD mechanical contact design engineering Substituting Eq. ( 1 ) into Eq. ( 3 ) leads to the family of rack cutter surfaces as follows: (4) R 1 = B 1   sin   γ 1 + C 1   cos   γ...

... incorporating a caster angle are derived. These results are useful in the design of the control system for the variator. power transmission rotating bodies traction motor drives kinematics mechanical control equipment A traction drive is a device, which transmits power by means of tractive...

... 9 , rehabilitation aid design 10 , parts feeding system design 11 , power plant design 12 , and others. The focus of the work presented here is on the development of a virtual environment for spatial mechanism design. design engineering virtual reality kinematics rotating bodies...

..., respectively. A table of clutching conditions showing a specific order of speed ratios is called the clutching sequence of a transmission. rotating bodies kinematics power transmission mechanical contact automobiles 01 September 1999 06 08 2002 Contributed by the Mechanisms...

... are not included in stress calculations. When properly selected, 3D modifications cause significantly less stress increases. mechanical contact rotating bodies bending torque stress analysis Noise and durability have been two major areas of gear research over the years. In today’s gear engineering...

... joints acting in parallel. One of the platforms is defined as the “top platform,” it has 6 degrees of freedom relative to the other platform, which is the base. industrial manipulators design engineering actuators kinematics rotating bodies robot kinematics 01 June 2000 06 08...

... loaded in compression produced the largest output torque. The maximum output torque for this clutch was measured at 65.6 N-m. clutches design engineering rotating bodies torque control Over-running clutches are used in applications which require torque to be transmitted in only one...

... DESIGN . Manuscript received May 2000; revised Sept. 2001. Associate Editor: R. F. Handschuh. 01 May 2000 01 Sept 2001 06 08 2002 mechanical contact rotating bodies mathematical programming finite element analysis elastic deformation Gears used in aircraft...

....), parameterizable by a single variable such as the arc-length parameter. Hence, we introduce a novel configuration called Single Degree-of-freedom Coupled Serial Chain (SDCSC) mechanisms for executing such single degree-of-freedom manipulation tasks. manipulator kinematics rotating bodies least squares...

..., is involute the only shape that can gives this special property to gears? mechanics rotating bodies angular velocity history 01 Feb 2000 16 05 2002 Let us underline once more that, a priori, the ratio R 1 / R 2 is not constant whatever the center distance...

... that the model is representative of the dynamic behavior of geared systems. 01 Jan 2000 16 05 2002 machine bearings rotors finite element analysis rotating bodies test equipment The test rig is characterized by an important speed reduction of 1:6 with a gear of large diameter which...

...., undercutting, safety factors, etc.). rotating bodies torque finite element analysis stress analysis elasticity mesh generation 01 Nov 2000 16 05 2002 Contributed by the Power Transmission and Gearing Committee for publication in the JOURNAL OF MECHANICAL DESIGN . Manuscript...

... a uniform cross-section for rotating disks is very uneconomic. turbines rotating bodies thermoelasticity optimisation finite element analysis stress analysis 01 January 2001 16 05 2002 Contributed by the Design Automation Committee for publication in the JOURNAL...

... by the Power Transmission & Gearing Committee for publication in the Journal of Mechanical Design. Manuscript received Apr. 1998; revised Mar. 2000. Associate Technical Editor: R. F. Handschuh. 01 Apr 1998 01 Mar 2000 reverse engineering mechanical contact kinematics rotating bodies...

... and focuses on specifying gear parameters for anticipated deflections during operation such that a loaded gear pair will operate as designed. The resulting gear pair is “slightly” modified from its original specifications. rotating bodies kinematics power transmission 01 Feb 2000...

... for publication in the JOURNAL OF MECHANICAL DESIGN . Manuscript received Mar. 1999; revised Jan. 2000. Associate Technical Editor: R. F. Handschuh. 01 Mar 1999 01 Jan 2000 machine theory machining rotating bodies design engineering cutting It can often be extremely useful...

... mechanical contact rotating bodies machine theory machine bearings computer aided engineering The estimation of the dynamic performance of geared systems is largely based on the Transmission Error of meshing teeth. Thus, the ability to accurately evaluate Transmission Error at the design stage...