... model is also proposed to predict the root stresses of face-milled and face-hobbed hypoid gear pairs under various loading and misalignment conditions. The model employs an automated finite elements mesh generator based on a predefined template for a general and computationally efficient treatment...

... of gear transmission error have not been clearly elucidated. Moreover, the relationship between tooth flank form and transmission error remains unclear. gear transmission error tooth flank form elastic deformation gears mesh generation power transmission (mechanical) springs...

... illustrates the concepts and equations presented, and the result for elastic deformation of the driving tines is consistent with that produced by the commercial finite element analysis software. design engineering elastic deformation failure (mechanical) mesh generation power transmission (mechanical...

... Karhunen-Loeve transforms mesh generation process design product design reduced order systems reliability multiscale analysis uncertainty propagation random field Karhunen–Loeve expansion control arm design univariate dimension-reduction method Gaussian quadrature formula design under...

... excited responses can be drastically decreased and tooth separation can be avoided. In other words, the system operates in the linear dynamics range. 14 10 2007 25 06 2008 21 10 2008 finite element analysis gears machine bearings mechanical contact mesh generation...

... instabilities, however, the distinction between in-phase and sequentially phased cases is not relevant because Eq. 11 reduces to Eq. 12 for l = 0 . 24 07 2006 22 12 2006 07 12 2007 gears mesh generation rings (structures) Time-varying forces from multiple ring...

... April 2004 25 03 2005 machinery design mesh generation Indexing Cam Mechanism Planetary Transmission Meshing Indexing cam mechanisms are widely used in industry. Three types of such mechanisms, the parallel indexing cam mechanism, ferguson indexing cam mechanism...

... . Manuscript received May 2003; revised October 2003. Associate Editor: 01 May 2003 01 October 2003 optical scanners smoothing methods image denoising image enhancement automotive components mesh generation This work is motivated by the errors associated with collecting...

.... Associate Editor: A. Kahraman. 01 February 2003 01 October 2003 gears drives mesh generation mechanical engineering computing The toroidal drive was proposed by M.R. Kuehnle 1 . The drive consists of four basic elements, Fig. 1 : (a) the central input worm; (b) radically...

... 3 discusses related research, and an overview of the proposed method is shown in Section 4. The key technique of one-dimensional meshing called “one-dimensional bubble packing” is discussed in Section 5, followed by the extraction of the chordal axis and quadrilateral mesh generation in Sections 6...

...D. Barkah; B. Shafiq; D. Dooner Standard procedures available for evaluating gear fillet stresses are targeted to circular gears where little information is available about noncircular gears. In this paper, a mesh generation algorithm is presented for the discretization of gear tooth profiles...