Volume 122 Issue 1 | J. Eng. Mater. Technol.

Technical Papers

A Simple Model for Stable Cyclic Stress-Strain Relationship of Type 304 Stainless Steel Under Nonproportional Loading

Takamoto Itoh, Assistant Professor,, Xu Chen, Professor,, Toshimitsu Nakagawa, Graduate Student, Masao Sakane, Professor

J. Eng. Mater. Technol. January 2000, 122(1): 1–9. doi: https://doi.org/10.1115/1.482758

Abstract

View articletitled, A Simple Model for Stable Cyclic Stress-Strain Relationship of Type 304 Stainless Steel Under Nonproportional Loading

Open the PDF for in another window

Topics: Hardening , Kinematics , Plasticity , Stainless steel , Stress , Stress-strain relations , Shear (Mechanics) , Low cycle fatigue

Representing the Effect of Crystallographic Texture on the Anisotropic Performance Behavior of Rolled Aluminum Plate

M. P. Miller, N. R. Barton

J. Eng. Mater. Technol. January 2000, 122(1): 10–17. doi: https://doi.org/10.1115/1.482759

Abstract

View articletitled, Representing the Effect of Crystallographic Texture on the Anisotropic Performance Behavior of Rolled Aluminum Plate

Open the PDF for in another window

Topics: Aluminum plate , Anisotropy , Crystals , Deformation , Finite element analysis , Hardening , Simulation , Stress , Texture (Materials) , Simulation results

Anisotropic Nonlinear Kinematic Hardening Rule Parameters From Reversed Proportional Axial-Torsional Cycling

J. C. Moosbrugger

J. Eng. Mater. Technol. January 2000, 122(1): 18–28. doi: https://doi.org/10.1115/1.482760

Abstract

View articletitled, Anisotropic Nonlinear Kinematic Hardening Rule Parameters From Reversed Proportional Axial-Torsional Cycling

Open the PDF for in another window

Topics: Anisotropy , Hardening , Kinematics , Stainless steel , Stress , Shear (Mechanics)

Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part I: Experiments

M. Mizuno, Y. Mima, M. Abdel-Karim, N. Ohno

J. Eng. Mater. Technol. January 2000, 122(1): 29–34. doi: https://doi.org/10.1115/1.482761

Abstract

View articletitled, Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part I: Experiments

Open the PDF for in another window

Topics: Hardening , Steel , Stress , Temperature , Tension , Viscoplasticity , Cycles

Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part II: Constitutive Modeling and Simulation

N. Ohno, M. Abdel-Karim

J. Eng. Mater. Technol. January 2000, 122(1): 35–41. doi: https://doi.org/10.1115/1.482762

Abstract

View articletitled, Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part II: Constitutive Modeling and Simulation

Open the PDF for in another window

Topics: Hardening , Kinematics , Simulation , Steel , Stress , Temperature , Tension , Viscoplasticity , Constitutive equations , Critical points (Physics)

Cyclic Deformation Behavior and Dislocation Substructures of Hexagonal Zircaloy-4 Under Out-of-Phase Loading

Xiao Lin

J. Eng. Mater. Technol. January 2000, 122(1): 42–48. doi: https://doi.org/10.1115/1.482763

Abstract

View articletitled, Cyclic Deformation Behavior and Dislocation Substructures of Hexagonal Zircaloy-4 Under Out-of-Phase Loading

Open the PDF for in another window

Topics: Deformation , Dislocations , Hardening , Stress , Zirconium , Tensors , Delays

Models for Cyclic Ratchetting Plasticity—Integration and Calibration

Magnus Ekh, Anders Johansson, Hans Thorberntsson, B. Lennart Josefson

J. Eng. Mater. Technol. January 2000, 122(1): 49–55. doi: https://doi.org/10.1115/1.482764

Abstract

View articletitled, Models for Cyclic Ratchetting Plasticity—Integration and Calibration

Open the PDF for in another window

Topics: Calibration , Hardening , Stress , Torsion , Plasticity , Tension , Kinematics

Model of Grain Deformation Method for Evaluation of Creep Life in In-Service Components

Hyo-Jin Kim, Jae-Jin Jung

J. Eng. Mater. Technol. January 2000, 122(1): 56–59. doi: https://doi.org/10.1115/1.482765

Abstract

View articletitled, Model of Grain Deformation Method for Evaluation of Creep Life in In-Service Components

Open the PDF for in another window

Topics: Creep , Deformation , Image processing

Modeling of Irradiation Embrittlement of Reactor Pressure Vessel Steels

S. Murakami, Professor, A. Miyazaki, Graduate Student, M. Mizuno, Assistant Professor

J. Eng. Mater. Technol. January 2000, 122(1): 60–66. doi: https://doi.org/10.1115/1.482766

Abstract

View articletitled, Modeling of Irradiation Embrittlement of Reactor Pressure Vessel Steels

Open the PDF for in another window

Topics: Damage , Embrittlement , Irradiation (Radiation exposure) , Neutrons , Steel , Dislocations , Yield stress , Constitutive equations , Pressure vessels , Work hardening

High Strain Extension of Open-Cell Foams

N. J. Mills, A. Gilchrist

J. Eng. Mater. Technol. January 2000, 122(1): 67–73. doi: https://doi.org/10.1115/1.482767

Abstract

View articletitled, High Strain Extension of Open-Cell Foams

Open the PDF for in another window

Topics: Anisotropy , Deformation , Density , Foams (Chemistry) , Poisson ratio , Shapes , Stress , Stress-strain relations , Tension , Stress-strain curves

Influence of Heat Treatment on the Mechanical Properties and Damage Development in a SiC/Ti-15-3 MMC

David A. Miller, Dimitris C. Lagoudas

J. Eng. Mater. Technol. January 2000, 122(1): 74–79. doi: https://doi.org/10.1115/1.482768

Abstract

View articletitled, Influence of Heat Treatment on the Mechanical Properties and Damage Development in a SiC/Ti-15-3 MMC

Open the PDF for in another window

Topics: Composite materials , Damage , Elastic moduli , Fibers , Heat treating (Metalworking) , Stress , Temperature , Thermomechanics , Fracture (Materials) , Deformation

Failure of a Ductile Adhesive Layer Constrained by Hard Adherends

Toru Ikeda, Akira Yamashita, Deokbo Lee, Noriyuki Miyazaki

J. Eng. Mater. Technol. January 2000, 122(1): 80–85. doi: https://doi.org/10.1115/1.482769

Abstract

View articletitled, Failure of a Ductile Adhesive Layer Constrained by Hard Adherends

Open the PDF for in another window

Topics: Adhesive joints , Adhesives , Fracture (Materials) , Stress , Failure , Fracture toughness

Interfacial Stresses and Void Nucleation in Discontinuously Reinforced Composites

T. C. Tszeng

J. Eng. Mater. Technol. January 2000, 122(1): 86–92. doi: https://doi.org/10.1115/1.482770

Abstract

View articletitled, Interfacial Stresses and Void Nucleation in Discontinuously Reinforced Composites

Open the PDF for in another window

Topics: Bonding , Composite materials , Nucleation (Physics) , Particulate matter , Stress , Deformation

An Investigation of Yield Potentials In Superplastic Deformation

Marwan K. Khraisheh

J. Eng. Mater. Technol. January 2000, 122(1): 93–97. doi: https://doi.org/10.1115/1.482771

Abstract

View articletitled, An Investigation of Yield Potentials In Superplastic Deformation

Open the PDF for in another window

Topics: Alloys , Anisotropy , Deformation , Superplasticity , Tension , Torsion , Tin , Stress , Flow (Dynamics)

Numerical Analysis of Welding Residual Stress and Its Verification Using Neutron Diffraction Measurement

Masahito Mochizuki, Makoto Hayashi, Toshio Hattori

J. Eng. Mater. Technol. January 2000, 122(1): 98–103. doi: https://doi.org/10.1115/1.482772

Abstract

View articletitled, Numerical Analysis of Welding Residual Stress and Its Verification Using Neutron Diffraction Measurement

Open the PDF for in another window

Topics: Neutron diffraction , Pipes , Stress , Welding , X-ray diffraction , Strain gages

Effect of Laser Shock Processing (LSP) on the Fatigue Resistance of an Aluminum Alloy

Tang Yaxin, Zhang Yongkang, Zhang Hong, Yu Chengye

J. Eng. Mater. Technol. January 2000, 122(1): 104–107. doi: https://doi.org/10.1115/1.482773

Abstract

View articletitled, Effect of Laser Shock Processing (LSP) on the Fatigue Resistance of an Aluminum Alloy

Open the PDF for in another window

Topics: Aluminum alloys , Fatigue , Laser hardening , Lasers , Shock (Mechanics) , Stress , Waves , Fracture (Materials) , Fracture (Process) , Transducers

Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences

Masahito Mochizuki, Toshio Hattori, Kimiaki Nakakado

J. Eng. Mater. Technol. January 2000, 122(1): 108–112. doi: https://doi.org/10.1115/1.482779

Abstract

View articletitled, Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences

Open the PDF for in another window

Topics: Fatigue strength , Stress , Welding

Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control

Jian Cao, Brad Kinsey, Sara A. Solla

J. Eng. Mater. Technol. January 2000, 122(1): 113–118. doi: https://doi.org/10.1115/1.482774

Abstract

View articletitled, Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control

Open the PDF for in another window

Topics: Artificial neural networks , Binders (Materials) , Control systems , Friction , Trajectories (Physics) , Materials properties

Cold Compaction of Composite Powders

K. T. Kim, Professor. Assoc. Mem. ASME, J. H. Cho, J. S. Kim

J. Eng. Mater. Technol. January 2000, 122(1): 119–128. doi: https://doi.org/10.1115/1.482775

Abstract

View articletitled, Cold Compaction of Composite Powders

Open the PDF for in another window

Topics: Compacting , Composite materials , Isostatic pressing , Tungsten , Copper , Density

On the Limit of Surface Integrity of Alumina by Ductile-Mode Grinding

I. Zarudi, L. C. Zhang, Mem. ASME

J. Eng. Mater. Technol. January 2000, 122(1): 129–134. doi: https://doi.org/10.1115/1.482776

Abstract

View articletitled, On the Limit of Surface Integrity of Alumina by Ductile-Mode Grinding

Open the PDF for in another window

Topics: Grinding

Measurement of the Axial Residual Stresses Using the Initial Strain Approach

Weili Cheng

J. Eng. Mater. Technol. January 2000, 122(1): 135–140. doi: https://doi.org/10.1115/1.482777

Abstract

View articletitled, Measurement of the Axial Residual Stresses Using the Initial Strain Approach

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Residual stresses , Deformation , Stress concentration

Effect of Plasma Cutting on the Fatigue Resistance of Fe510 D1 Steel

M. Chiarelli, Assistant Professor, A. Lanciotti, Assistant Professor, M. Sacchi, Engineer,

J. Eng. Mater. Technol. January 2000, 122(1): 141–145. doi: https://doi.org/10.1115/1.482778

Abstract

View articletitled, Effect of Plasma Cutting on the Fatigue Resistance of Fe510 D1 Steel

Open the PDF for in another window

Topics: Fatigue , Fatigue testing , Plasma arc cutting , Plasmas (Ionized gases) , Steel , Cutting

Technical Papers

A Simple Model for Stable Cyclic Stress-Strain Relationship of Type 304 Stainless Steel Under Nonproportional Loading

Representing the Effect of Crystallographic Texture on the Anisotropic Performance Behavior of Rolled Aluminum Plate

Anisotropic Nonlinear Kinematic Hardening Rule Parameters From Reversed Proportional Axial-Torsional Cycling

Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part I: Experiments

Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part II: Constitutive Modeling and Simulation

Cyclic Deformation Behavior and Dislocation Substructures of Hexagonal Zircaloy-4 Under Out-of-Phase Loading

Models for Cyclic Ratchetting Plasticity—Integration and Calibration

Model of Grain Deformation Method for Evaluation of Creep Life in In-Service Components

Modeling of Irradiation Embrittlement of Reactor Pressure Vessel Steels

High Strain Extension of Open-Cell Foams

Influence of Heat Treatment on the Mechanical Properties and Damage Development in a SiC/Ti-15-3 MMC

Failure of a Ductile Adhesive Layer Constrained by Hard Adherends

Interfacial Stresses and Void Nucleation in Discontinuously Reinforced Composites

An Investigation of Yield Potentials In Superplastic Deformation

Numerical Analysis of Welding Residual Stress and Its Verification Using Neutron Diffraction Measurement

Effect of Laser Shock Processing (LSP) on the Fatigue Resistance of an Aluminum Alloy

Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences

Consistent and Minimal Springback Using a Stepped Binder Force Trajectory and Neural Network Control

Cold Compaction of Composite Powders

On the Limit of Surface Integrity of Alumina by Ductile-Mode Grinding

Measurement of the Axial Residual Stresses Using the Initial Strain Approach

Effect of Plasma Cutting on the Fatigue Resistance of Fe510 D1 Steel

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only