Important from exploitation point of view mechanical properties of single-layer, double-layer, and mixed alumina and ceria films and their stainless steel (SS) substrate were investigated by means of nanoindentation experiments. As a result, we obtained the experimental load–displacement curves and calculated the indentation hardness (HIT) and indentation modulus (EIT), by means of Oliver and Pharr approximation method. Numerical simulations of the process of nanoindentation by means of finite element method were performed as well, in order to obtain more information about the plastic properties of the investigated films. The obtained results show that the mixed Al2O3+Ce2O3 film, obtained at dominant concentration of cerium ions in the working electrolyte, has the highest indentation hardness and modulus, followed by the single Ce2O3-CeO2 film, the mixed Al2O3+Ce2O3 film, obtained at dominant concentration of aluminum ions in the working electrolyte, the double Ce2O3-CeO2/Al2O3 layer, and single Al2O3 layer.
Skip Nav Destination
Article navigation
January 2019
Research-Article
Investigation of Mechanical Properties of Mono- and Multi-layer Alumina and Ceria Films Using Finite Element Modeling and Nanoindentation Experiments
Sabina Cherneva,
Sabina Cherneva
Institute of Mechanics,
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4,
Sofia 1113, Bulgaria
e-mail: sabina_cherneva@yahoo.com
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4,
Sofia 1113, Bulgaria
e-mail: sabina_cherneva@yahoo.com
Search for other works by this author on:
Desislava Guergova,
Desislava Guergova
Institute of Physical Chemistry,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: dguergova@ipc.bas.bg
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 11
,Sofia 1113, Bulgaria
e-mail: dguergova@ipc.bas.bg
Search for other works by this author on:
Roumen Iankov,
Roumen Iankov
Institute of Mechanics,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: iankovr@yahoo.com
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4
,Sofia 1113, Bulgaria
e-mail: iankovr@yahoo.com
Search for other works by this author on:
Dimitar Stoychev
Dimitar Stoychev
Institute of Physical Chemistry,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: stoychev@ipc.bas.bg
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 11
,Sofia 1113, Bulgaria
e-mail: stoychev@ipc.bas.bg
Search for other works by this author on:
Sabina Cherneva
Institute of Mechanics,
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4,
Sofia 1113, Bulgaria
e-mail: sabina_cherneva@yahoo.com
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4,
Sofia 1113, Bulgaria
e-mail: sabina_cherneva@yahoo.com
Desislava Guergova
Institute of Physical Chemistry,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: dguergova@ipc.bas.bg
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 11
,Sofia 1113, Bulgaria
e-mail: dguergova@ipc.bas.bg
Roumen Iankov
Institute of Mechanics,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: iankovr@yahoo.com
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 4
,Sofia 1113, Bulgaria
e-mail: iankovr@yahoo.com
Dimitar Stoychev
Institute of Physical Chemistry,
Bulgarian Academy of Sciences,
Sofia 1113, Bulgaria
e-mail: stoychev@ipc.bas.bg
Bulgarian Academy of Sciences,
Acad. G. Bonchev str., Bl. 11
,Sofia 1113, Bulgaria
e-mail: stoychev@ipc.bas.bg
1Corresponding author.
Contributed by the Materials Division of ASME for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received January 23, 2018; final manuscript received June 20, 2018; published online July 18, 2018. Assoc. Editor: Vadim V. Silberschmidt.
J. Eng. Mater. Technol. Jan 2019, 141(1): 011006 (10 pages)
Published Online: July 18, 2018
Article history
Received:
January 23, 2018
Revised:
June 20, 2018
Citation
Cherneva, S., Guergova, D., Iankov, R., and Stoychev, D. (July 18, 2018). "Investigation of Mechanical Properties of Mono- and Multi-layer Alumina and Ceria Films Using Finite Element Modeling and Nanoindentation Experiments." ASME. J. Eng. Mater. Technol. January 2019; 141(1): 011006. https://doi.org/10.1115/1.4040593
Download citation file:
Get Email Alerts
Cited By
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Effect of Zirconium Oxide Reinforcement on Microstructural, Electrochemical, and Mechanical Properties of TiNi Alloy Produced via Powder Metallurgy Route
J. Eng. Mater. Technol (October,2021)
Thermorheological Characterization of Elastoviscoplastic Carbopol Ultrez 20 Gel
J. Eng. Mater. Technol (July,2015)
Proper Orthogonal Decomposition–Radial Basis Function Surrogate Model-Based Inverse Analysis for Identifying Nonlinear Burgers Model Parameters From Nanoindentation Data
J. Eng. Mater. Technol (October,2017)
Modeling the Elastic Properties of Reticulated Porous Ceramics
J. Eng. Mater. Technol (January,2017)
Related Proceedings Papers
Related Chapters
Synthesis and Characterization of Carboxymethyl Chitosan Based Hybrid Biopolymer Scaffold
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Introduction to Stress and Deformation
Introduction to Plastics Engineering
Global-Local Multisalce Modelling of Sandwich Structures by Using Arlequin Method
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)