...@strath.ac.uk Email: hitesh_sharma@mail.ru Email: andrew.platts@strath.ac.uk Email: salah.rahimi@strath.ac.uk 30 01 2023 27 07 2023 27 07 2023 16 08 2023 inertia friction welding (IFW) finite element analysis maraging steel process modeling microstructure...

... alloys. Furthermore, the utility of the numerical model for making quantitative predictions and investigating different process parameters to reduce void formation is demonstrated. aluminum finite element analysis predictive model numerical analysis voids material flow plasticity bulk...

... mechanism finite element analysis temperature grinding force equivalent stress and strain analysis grinding and abrasive processes machining processes modeling and simulation In the conventional dry grinding (CDG), several of the abrasive grits of the grinding wheel interact...

... the variations in the force signals to interactions between the tool probe and the underlying material voids. Our approach relies on a high-fidelity finite element analysis simulation of the FSW process and on correlation of numerically obtained process force signals with the corresponding void structures...

...Shiping Zhang; Ali Ghatei-Kalashami; Abdelbaset R. H. Midawi; Norman Y. Zhou To accurately model the resistance spot welding (RSW) joint in finite element analysis (FEA), the constitutive behavior of materials in various weld regions such as heat-affected zone (HAZ) should be measured. Due...

... industries for joining of metal sheets. However, the short welding cycle makes it challenging to effectively monitor the temperature history and deformation of the workpieces during the process. In this study, a three-dimensional (3D) finite element analysis model for USW of superelastic NiTi shape memory...

.... Electron back-scatter diffraction (EBSD) and orientation imaging microscopy (OIM) analysis quantify the geometrically necessary dislocation (GND) density distribution of unstrained and strained as well as unpeened and peened conditions. Finite element analysis (FEA) simulation models back stress...

...] Cattenone , A. , Morganti , S. , Alaimo , G. , and Auricchio , F. , 2019 , “ Finite Element Analysis of Additive Manufacturing Based on Fused Deposition Modeling: Distortions Prediction and Comparison With Experimental Data ,” ASME J. Manuf. Sci. Eng. , 141 ( 1 ), p. 011010 . 10.1115...

.... The failure patterns obtained in finite element analysis (FEA) simulation for both pointed and concave punch perforation show good agreement with general finding in experiments which shows the prediction capability of developed models. Fig. 18 Maximum von-Mises stress at different discharge energies...

... properties of the laminated film directly. Instead, we assumed that the lamination process did not change the mechanical properties of the PET film much and validated it by comparing the measured properties of the PET-coated steel sheet with those predicted using the finite element analysis...

... leveling roll configuration finite element analysis Following the rolling process, a plate usually exhibits shape defects and residual stresses that may reduce the production line manufacturing quality. Plate shape defects may occur as a consequence of improper process conditions during hot...

... like deep drawing and spinning. SPISF has drawn attention because of its effectiveness and suitability for customized fabrication [ 4 ]. Schematic representation of SPISF process is shown in Fig. 1 . single-point incremental sheet forming spiral toolpath finite element analysis...

... Glass Fiber Composite Preforms ,” ASME J. Manuf. Sci. Eng. , 135 ( 1 ), p. 011010 . 10.1115/1.4023270 [34] Voothaluru , R. , Liu , C. R. , and Cheng , G. J. , 2013 , “ Finite Element Analysis of the Variation in Residual Stress Distribution in Laser Shock Peening of Steels ,” ASME...

... of the workpieces. Case studies of ultrasonic welding simulations for multiple layers of lithium-ion battery tabs are presented. The prediction leads to several innovative ultrasonic welding process designs for improved welding quality. ultrasonic welding vibration finite element analysis thermo-mechanical...

... beam coupling nonlinear foundation unilateral contact finite element analysis rolling mill strip profile/flatness The problem of beams on elastic foundations has been extensively studied because of its importance in civil and mechanical engineering for such broad applications as buildings...

..., beneath which the residual stress profiles can be mapped. A shot-peening simulation is performed as an example for obtaining the residual stress profiles which are mapped into new FE models. finite element analysis manufacturing processes mapping of residual stress profiles shot-peening...

...Bruce L. Tai; Andrew J. Jessop; David A. Stephenson; Albert J. Shih This paper presents the three dimensional (3-D) finite element analysis (FEA) to predict the workpiece thermal distortion in drilling multiple deep-holes under minimum quantity lubrication (MQL) condition. Heat sources...

... manufacturers) alloy sheets are compared. Experimental setup was modeled using deform 2d, and measured temperature curves were compared with the finite element analysis (FEA) predictions and a window of heat transfer coefficients were determined for warm forming of sheets. Determined heat transfer coefficients...

... hydroforming of magnesium alloys with different outlet diameters and propose an adaptive control algorithm to determine appropriate loading paths for the forming process. The finite element analysis is used to simulate the flow pattern of the tube during tube hydroforming process. The analytical flow line...

...-based lubricants were applied to the sheet. In conclusion, evaluated synthetic/water-based lubricants had better lubricity than petroleum-based lubricants. 01 12 2009 14 03 2011 09 12 2011 09 12 2011 annealing deep drawing finite element analysis forming processes...