Volume 98 Issue 2 | J. Manuf. Sci. Eng.

Topics: Fracture toughness , Glass , Grinding , Flow (Dynamics) , Diamonds , Fracture (Materials) , Fracture (Process) , Wheels , Brittle fracture , Cutting

On the Development of Multi-Edge Cutting Tools for BTA Deep-Hole Machining

M. O. M. Osman, V. Latinovic

J. Eng. Ind. May 1976, 98(2): 474–480. doi: https://doi.org/10.1115/1.3438911

Abstract

View articletitled, On the Development of Multi-Edge Cutting Tools for BTA Deep-Hole Machining

Open the PDF for in another window

Topics: Cutting tools , Machining , Cutting , Design , Drilling , Geometry , Lubrication , Machine tools , Stability , Wear

Cutting Rate-Tool Life Characteristic Functions for Material Removal Processes—Part 1: Theory

M. Y. Friedman, V. A. Tipnis

J. Eng. Ind. May 1976, 98(2): 481–486. doi: https://doi.org/10.1115/1.3438913

Abstract

View articletitled, Cutting Rate-Tool Life Characteristic Functions for Material Removal Processes—Part 1: Theory

Open the PDF for in another window

Topics: Cutting , Machining , Optimization

Cutting Rate-Tool Life Characteristic Functions for Material Removal Processes—Part 2: Verification and Applications

V. A. Tipnis, M. Y. Friedman

J. Eng. Ind. May 1976, 98(2): 487–495. doi: https://doi.org/10.1115/1.3438915

Abstract

View articletitled, Cutting Rate-Tool Life Characteristic Functions for Material Removal Processes—Part 2: Verification and Applications

Open the PDF for in another window

Topics: Cutting , Machining , Adaptive control , Milling , Sawing

A Note on Blade Loss Dynamics of Rotor-Bearing Systems

R. G. Kirk, D. H. Hibner

J. Eng. Ind. May 1976, 98(2): 497–503. doi: https://doi.org/10.1115/1.3438919

Abstract

View articletitled, A Note on Blade Loss Dynamics of Rotor-Bearing Systems

Open the PDF for in another window

Topics: Bearings , Blades , Dynamics (Mechanics) , Rotors , Transients (Dynamics) , Damping , Dynamic response , Steady state , Stress

Effect of Damping on the Lateral Critical Speeds of Rotor-Bearing Systems

Pranabesh De Choudhury, Stephen J. Zsolcsak, Eugene W. Barth

J. Eng. Ind. May 1976, 98(2): 505–513. doi: https://doi.org/10.1115/1.3438925

Abstract

View articletitled, Effect of Damping on the Lateral Critical Speeds of Rotor-Bearing Systems

Open the PDF for in another window

Topics: Bearings , Damping , Rotors , Design , Fluid films , Machinery , Mode shapes , Steady state

On the Design of Mooring Lines for Deep Water Applications

J. M. Niedzwecki, M. J. Casarella

J. Eng. Ind. May 1976, 98(2): 514–522. doi: https://doi.org/10.1115/1.3438931

Abstract

View articletitled, On the Design of Mooring Lines for Deep Water Applications

Open the PDF for in another window

Topics: Deepwater development , Design , Mooring , Ropes , Wire , Chain , Water , Oceans , Offshore platforms , Algorithms

Spherical Shell Sector Acrylic Plastic Windows with 12,000 ft Operational Depth for Submersible Alvin

J. D. Stachiw, R. Sletten

J. Eng. Ind. May 1976, 98(2): 523–536. doi: https://doi.org/10.1115/1.3438932

Abstract

View articletitled, Spherical Shell Sector Acrylic Plastic Windows with 12,000 ft Operational Depth for Submersible Alvin

Open the PDF for in another window

Topics: Plastic windows , Spherical shells , Submersibles , Pressure , Cycles , Failure , Fatigue , Flanges , Seabed , Stress concentration

NEMO Type Acrylic Plastic Spherical Hull for Manned Operation to 3000 ft Depth

J. D. Stachiw

J. Eng. Ind. May 1976, 98(2): 537–549. doi: https://doi.org/10.1115/1.3438934

Abstract

View articletitled, NEMO Type Acrylic Plastic Spherical Hull for Manned Operation to 3000 ft Depth

Open the PDF for in another window

Topics: Hull , Pressure , Fatigue life , Aluminum , Cycles , Emissions , Failure , Hydrostatics , Manufacturing , Stress

A Dynamic Simulation of Wave Impact Loads on Offshore Floating Platforms

J. G. Giannotti

J. Eng. Ind. May 1976, 98(2): 550–557. doi: https://doi.org/10.1115/1.3438936

Abstract

View articletitled, A Dynamic Simulation of Wave Impact Loads on Offshore Floating Platforms

Open the PDF for in another window

Topics: Ocean engineering , Simulation , Stress , Waves , Design , Offshore platforms , Structural analysis , Damage , Finite element methods , Marine vehicles

Current Profile Energy and Ocean Moorings

P. J. Hartman, C. D. Nash, Jr.

J. Eng. Ind. May 1976, 98(2): 558–562. doi: https://doi.org/10.1115/1.3438937

Abstract

View articletitled, Current Profile Energy and Ocean Moorings

Open the PDF for in another window

Topics: Mooring , Oceans , Kinetic energy , Shapes , Water , Buoys , Joules , Nylon fabrics , Ocean currents

Acrylic Plastic Spherical Shell Windows Under Point Impact Loading

J. D. Stachiw, O. H. Burnside

J. Eng. Ind. May 1976, 98(2): 563–575. doi: https://doi.org/10.1115/1.3438939

Abstract

View articletitled, Acrylic Plastic Spherical Shell Windows Under Point Impact Loading

Open the PDF for in another window

Topics: Spherical shells , Hydrostatic pressure , Tension , Compressive stress , Finite element analysis , Fracture (Materials) , Fracture (Process) , Oceans , Submersibles , Weight (Mass)

Stability and Transient Motion of a Plain Journal Mounted in Flexible Damped Supports

R. G. Kirk, E. J. Gunter

J. Eng. Ind. May 1976, 98(2): 576–592. doi: https://doi.org/10.1115/1.3438940

Abstract

View articletitled, Stability and Transient Motion of a Plain Journal Mounted in Flexible Damped Supports

Open the PDF for in another window

Topics: Stability , Transients (Dynamics) , Rotors , Bearings , Dampers , Damping , Journal bearings , Clearances (Engineering) , Design , Eigenvalues

The Dynamics of Rotor-Bearing Systems Using Finite Elements

H. D. Nelson, J. M. McVaugh

J. Eng. Ind. May 1976, 98(2): 593–600. doi: https://doi.org/10.1115/1.3438942

Abstract

View articletitled, The Dynamics of Rotor-Bearing Systems Using Finite Elements

Open the PDF for in another window

Topics: Bearings , Dynamics (Mechanics) , Finite element analysis , Rotors , Damping , Disks , Dynamic modeling , Finite element model , Inertia (Mechanics) , Stiffness

On the Behavior of Statistical Models Used for Design

P. H. Wirsching

J. Eng. Ind. May 1976, 98(2): 601–606. doi: https://doi.org/10.1115/1.3438944

Abstract

View articletitled, On the Behavior of Statistical Models Used for Design

Open the PDF for in another window

Topics: Design , Probability , Failure , Stress , Structural elements (Construction)

Measurement of Temperature Distribution Within Tool Using Powders of Constant Melting Point

S. Kato, K. Yamaguchi, Y. Watanabe, Y. Hiraiwa

J. Eng. Ind. May 1976, 98(2): 607–613. doi: https://doi.org/10.1115/1.3438946

Abstract

View articletitled, Measurement of Temperature Distribution Within Tool Using Powders of Constant Melting Point

Open the PDF for in another window

Topics: Melting point , Temperature measurement , Temperature distribution , Heat , Cutting , Friction

A Stochastic Approach to Characterization of Machine Tool System Dynamics Under Actual Working Conditions

F. A. Burney, S. M. Pandit, S. M. Wu

J. Eng. Ind. May 1976, 98(2): 614–619. doi: https://doi.org/10.1115/1.3438948

Abstract

View articletitled, A Stochastic Approach to Characterization of Machine Tool System Dynamics Under Actual Working Conditions

Open the PDF for in another window

Topics: Machine tools , System dynamics , Dynamics (Mechanics) , Cutting , Displacement , Milling machines , Signals , Time series

Identification of a Work Restricted Forging Process for Optimization by Adaptive Control

A. W. Kwiatkowski, S. K. Biswas

J. Eng. Ind. May 1976, 98(2): 620–625. doi: https://doi.org/10.1115/1.3438949

Abstract

View articletitled, Identification of a Work Restricted Forging Process for Optimization by Adaptive Control

Open the PDF for in another window

Topics: Adaptive control , Forging , Optimization , Manufacturing systems , Regression models

Application of EHD Oil Film Theory to Industrial Gear Drives

E. J. Wellauer, G. A. Holloway

J. Eng. Ind. May 1976, 98(2): 626–631. doi: https://doi.org/10.1115/1.3438951

Abstract

View articletitled, Application of EHD Oil Film Theory to Industrial Gear Drives

Open the PDF for in another window

Topics: Mechanical drives , Film thickness , Gear teeth , Gears , Surface texture , Composite materials , Design , Geometry , Lubricants , Petroleum

Instantaneous Behavior of Lubricating Oil Supplied onto the Tooth Flanks and Its Influence on the Scoring Resistance of Spur Gears

K. Fujita, F. Obata, K. Matsuo

J. Eng. Ind. May 1976, 98(2): 635–641. doi: https://doi.org/10.1115/1.3438959

Abstract

View articletitled, Instantaneous Behavior of Lubricating Oil Supplied onto the Tooth Flanks and Its Influence on the Scoring Resistance of Spur Gears

Open the PDF for in another window

Topics: Lubricating oils , Spur gears , Nozzles

Theoretical Model for Predicting Steam-Ejector Performance

E. F. Kurtz, Jr.

J. Eng. Ind. May 1976, 98(2): 645–651. doi: https://doi.org/10.1115/1.3438962

Abstract

View articletitled, Theoretical Model for Predicting Steam-Ejector Performance

Open the PDF for in another window

Topics: Ejectors , Flow (Dynamics) , Design , Compressibility , Computer software , Differential equations , Drops , FORTRAN , Mass transfer , Momentum

The Varying Structure of Open-End Spun (OE) Yarns

P. R. Lord

J. Eng. Ind. May 1976, 98(2): 652–657. doi: https://doi.org/10.1115/1.3438964

View articletitled, The Varying Structure of Open-End Spun (OE) Yarns

Open the PDF for in another window

Topics: Yarns

Balloon Collapse in Ring-Spinning

M. J. Turteltaub, M. A. Bejar

J. Eng. Ind. May 1976, 98(2): 658–663. doi: https://doi.org/10.1115/1.3438965

View articletitled, Balloon Collapse in Ring-Spinning

Open the PDF for in another window

Topics: Collapse , Spin (Aerodynamics) , Spinning (Textile)

The Effects of Opening Roller Wire Design and Operating Speed on the Properties of Open-End Cotton Yarn

E. A. Vaughn, T. S. Cox

J. Eng. Ind. May 1976, 98(2): 664–669. doi: https://doi.org/10.1115/1.3438966

Abstract

View articletitled, The Effects of Opening Roller Wire Design and Operating Speed on the Properties of Open-End Cotton Yarn

Open the PDF for in another window

Topics: Cotton yarns , Design , Rollers , Wire , Yarns , Elongation , Fibers , Spin (Aerodynamics) , Spinning (Textile)

The Effect of Certain Machine Parameters and Fiber Preparation on the Properties of Open-End Cotton Yarns

E. A. Vaughn, T. Hiranprueck

J. Eng. Ind. May 1976, 98(2): 670–674. doi: https://doi.org/10.1115/1.3438968

Abstract

View articletitled, The Effect of Certain Machine Parameters and Fiber Preparation on the Properties of Open-End Cotton Yarns

Open the PDF for in another window

Topics: Cotton yarns , Fibers , Machinery , Municipal solid wastes , Solid wastes , Yarns , Spin (Aerodynamics) , Spinning (Textile) , Pressure , Turbines

Collection Efficiency and Pressure Drop of Needle Punched Filters

E. M. Afify, M. H. Mohamed

J. Eng. Ind. May 1976, 98(2): 675–680. doi: https://doi.org/10.1115/1.3438969

Abstract

View articletitled, Collection Efficiency and Pressure Drop of Needle Punched Filters

Open the PDF for in another window

Topics: Filters , Needles , Pressure drop , Filtration , Textiles , Dust , Fly ash , Density , Flow (Dynamics) , Packing (Shipments)

The Effect of Casing Wear on the Burst Strength of Casing—Part 1: Joint Leakage

W. B. Bradley

J. Eng. Ind. May 1976, 98(2): 681–685. doi: https://doi.org/10.1115/1.3438971

Abstract

View articletitled, The Effect of Casing Wear on the Burst Strength of Casing—Part 1: Joint Leakage

Open the PDF for in another window

Topics: Leakage , Wear , Failure , Pressure , Theoretical analysis

The Effect of Casing Wear on the Burst Strength of Casing—Part 2: Statistical Burst Strength of Worn and Unworn Casing Strings

W. B. Bradley

J. Eng. Ind. May 1976, 98(2): 686–694. doi: https://doi.org/10.1115/1.3438972

Abstract

View articletitled, The Effect of Casing Wear on the Burst Strength of Casing—Part 2: Statistical Burst Strength of Worn and Unworn Casing Strings

Open the PDF for in another window

Topics: String , Wear , American Petroleum Institute , Leakage , Probability , Failure , Statistical distributions , Theoretical analysis

Passive Refrigeration for Arctic Pile Supports

J. W. Galate

J. Eng. Ind. May 1976, 98(2): 695–700. doi: https://doi.org/10.1115/1.3438974

Abstract

View articletitled, Passive Refrigeration for Arctic Pile Supports

Open the PDF for in another window

Topics: Arctic region , Refrigeration , Permafrost , Heat , Heat pipes , Natural convection , Pipelines , Computers , Condensation , Construction

Removal of Water Base Mud From Well Bores in Permafrost Zones

F. W. Ng

J. Eng. Ind. May 1976, 98(2): 701–707. doi: https://doi.org/10.1115/1.3438975

Abstract

View articletitled, Removal of Water Base Mud From Well Bores in Permafrost Zones

Open the PDF for in another window

Topics: Permafrost , Water , Annulus , Displacement , Contamination , Drilling , Fluids , Arctic region , Convection , Currents

The Effects of Processing Variables on Mechanical Properties and Sulfide Stress Cracking Resistance of SAE 4135 Steel Modified With 0.75 Percent Mo and 0.035 Percent Cb

P. J. Grobner, D. L. Sponseller, D. E. Diesburg

J. Eng. Ind. May 1976, 98(2): 708–716. doi: https://doi.org/10.1115/1.3438976

Abstract

View articletitled, The Effects of Processing Variables on Mechanical Properties and Sulfide Stress Cracking Resistance of SAE 4135 Steel Modified With 0.75 Percent Mo and 0.035 Percent Cb

Open the PDF for in another window

Topics: Cracking (Materials) , Fracture (Process) , Mechanical properties , Steel , Stress , Temperature , Cooling , Cantilever beams , Heat , Yield strength

Resistance of Commercially Available High Strength Tubular Goods to Sulfide Stress Cracking

J. L. Battle, T. V. Miller, M. E. True

J. Eng. Ind. May 1976, 98(2): 717–729. doi: https://doi.org/10.1115/1.3438978

View articletitled, Resistance of Commercially Available High Strength Tubular Goods to Sulfide Stress Cracking

Open the PDF for in another window

Topics: Cracking (Materials) , Fracture (Process) , Stress

Issues

Research Papers

Discussions

Technical Briefs

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only