Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 97, Issue 2
May 1975
This article was originally published in
Journal of Engineering for Industry
Issue Cover
ISSN 0022-0817
In this Issue

Research Papers

An Analysis of the Picking Mechanism of a Textile Loom
P. R. Lord, M. H. Mohamed
J. Eng. Ind. May 1975, 97(2): 385–390. doi: https://doi.org/10.1115/1.3438597
View articletitled, An Analysis of the Picking Mechanism of a Textile Loom
Open the PDF for in another window
Topics: Looms , Textiles , Cycles
On the Structural Design of Tubular Joints
W. Visser
J. Eng. Ind. May 1975, 97(2): 391–399. doi: https://doi.org/10.1115/1.3438598
View articletitled, On the Structural Design of Tubular Joints
Open the PDF for in another window
Topics: Structural design , Tubular joints , Design , Stress , Stress concentration , American Petroleum Institute , Bracing (Construction) , Chords (Trusses) , Clearances (Engineering) , Computer software
Influence of Neutral Axial Stress on Yield and Collapse of Pipe
A. Lubinski
J. Eng. Ind. May 1975, 97(2): 400–407. doi: https://doi.org/10.1115/1.3438599
View articletitled, Influence of Neutral Axial Stress on Yield and Collapse of Pipe
Open the PDF for in another window
Topics: Collapse , Pipes , Stress , Clearances (Engineering) , Compression , Plasticity , Tension
Effects of Straining, Aging, and Stress-Relieving on Mechanical Properties of Steels for Arctic Service
R. J. Jesseman, R. C. Smith
J. Eng. Ind. May 1975, 97(2): 408–416. doi: https://doi.org/10.1115/1.3438600
View articletitled, Effects of Straining, Aging, and Stress-Relieving on Mechanical Properties of Steels for Arctic Service
Open the PDF for in another window
Topics: Arctic region , Mechanical properties , Steel , Stress , Fittings , Fracture toughness , Pipes , Temperature , Carbon , Energy levels (Quantum mechanics)
Mechanical Properties of Simulated Deep Permafrost
M. A. Goodman
J. Eng. Ind. May 1975, 97(2): 417–425. doi: https://doi.org/10.1115/1.3438601
View articletitled, Mechanical Properties of Simulated Deep Permafrost
Open the PDF for in another window
Topics: Mechanical properties , Permafrost , Pressure , Creep , Coulombs , Freezing , Plastics , Sands , Thawing , Viscoelastic materials
Casing Design in Directionally Drilled Wells
Bruce Woodlan, G. E. Powell
J. Eng. Ind. May 1975, 97(2): 426–433. doi: https://doi.org/10.1115/1.3438602
View articletitled, Casing Design in Directionally Drilled Wells
Open the PDF for in another window
Topics: Design , Wells , Stress , Collapse , Errors , String , Tension
Computerized Casing Design Considerations
H. Irvin Smith
J. Eng. Ind. May 1975, 97(2): 434–444. doi: https://doi.org/10.1115/1.3438603
View articletitled, Computerized Casing Design Considerations
Open the PDF for in another window
Topics: Design , Computers
The Experimental Measurement of Casing Wear Due to Tripping—Part 1: Drill Pipe Wear
J. E. Fontenot, J. W. McEver
J. Eng. Ind. May 1975, 97(2): 445–455. doi: https://doi.org/10.1115/1.3438604
View articletitled, The Experimental Measurement of Casing Wear Due to Tripping—Part 1: Drill Pipe Wear
Open the PDF for in another window
Topics: Drills (Tools) , Pipes , Wear , Water , Sands , Solids , Stress , Wear testing
The Experimental Measurement of Casing Wear Due to Tripping—Part 2: Wire-Line Wear
J. E. Fontenot, J. W. McEver
J. Eng. Ind. May 1975, 97(2): 456–463. doi: https://doi.org/10.1115/1.3438605
View articletitled, The Experimental Measurement of Casing Wear Due to Tripping—Part 2: Wire-Line Wear
Open the PDF for in another window
Topics: Wear , Wire , Solids , Water , Drills (Tools) , Sands , Stress , Wear testing
Experimental Determination of Casing Wear by Drill String Rotation
W. B. Bradley
J. Eng. Ind. May 1975, 97(2): 464–471. doi: https://doi.org/10.1115/1.3438606
View articletitled, Experimental Determination of Casing Wear by Drill String Rotation
Open the PDF for in another window
Topics: Drill strings , Rotation , Wear , Drilling , Drills (Tools) , Pipes
Determination of the Accuracy of Segmented Representations of Cable Shape
H. T. Wang
J. Eng. Ind. May 1975, 97(2): 472–478. doi: https://doi.org/10.1115/1.3438607
View articletitled, Determination of the Accuracy of Segmented Representations of Cable Shape
Open the PDF for in another window
Topics: Cables , Shapes , Geometry , Tension
Plasticity of Ice and Sand-Ice Systems
Leonard L. Smith, J. B. Cheatham, Jr.
J. Eng. Ind. May 1975, 97(2): 479–484. doi: https://doi.org/10.1115/1.3438608
View articletitled, Plasticity of Ice and Sand-Ice Systems
Open the PDF for in another window
Topics: Ice , Plasticity , Sands , Displacement , Atmospheric pressure , Compression , Computation , Coulombs , Deformation , Temperature
Effects of Coupled Extensional-Torsional Oscillations in Wire Rope During Ocean Salvage and Construction Operations
R. A. Skop, R. K. Samras
J. Eng. Ind. May 1975, 97(2): 485–492. doi: https://doi.org/10.1115/1.3438609
View articletitled, Effects of Coupled Extensional-Torsional Oscillations in Wire Rope During Ocean Salvage and Construction Operations
Open the PDF for in another window
Topics: Construction , Marine salvage , Oscillations , Ropes , Wire , Dynamic analysis , Dynamic response , Dynamics (Mechanics) , Geometry , Rotation
The Twist of a Helically Buckled Casing
R. F. Mitchell
J. Eng. Ind. May 1975, 97(2): 493–497. doi: https://doi.org/10.1115/1.3438610
View articletitled, The Twist of a Helically Buckled Casing
Open the PDF for in another window
Topics: Buckling , Differential equations , Dimensions , Failure , Risk , Torque , Well casings
Laminar Flow of Non-Newtonian Fluids in an Eccentric Annulus
T. L. Guckes
J. Eng. Ind. May 1975, 97(2): 498–506. doi: https://doi.org/10.1115/1.3438611
View articletitled, Laminar Flow of Non-Newtonian Fluids in an Eccentric Annulus
Open the PDF for in another window
Topics: Annulus , Laminar flow , Non-Newtonian fluids , Flow (Dynamics) , Fluids , Non-Newtonian flow , Pipes , Pressure drop
Wellbore Gyp-Scale Control
T. L. Knowles
J. Eng. Ind. May 1975, 97(2): 507–512. doi: https://doi.org/10.1115/1.3438612
View articletitled, Wellbore Gyp-Scale Control
Open the PDF for in another window
Topics: Oil fields , Reservoirs
Synthesis of Multi-Variable Function-Generator Linkages Using Point Position Reduction
T. S. Mruthyunjaya
J. Eng. Ind. May 1975, 97(2): 513–519. doi: https://doi.org/10.1115/1.3438613
View articletitled, Synthesis of Multi-Variable Function-Generator Linkages Using Point Position Reduction
Open the PDF for in another window
Topics: Generators , Linkages
Optimal Synthesis of Flexible Link Mechanisms with Large Static Deflections
N. M. Sevak, C. W. McLarnan
J. Eng. Ind. May 1975, 97(2): 520–526. doi: https://doi.org/10.1115/1.3438614
View articletitled, Optimal Synthesis of Flexible Link Mechanisms with Large Static Deflections
Open the PDF for in another window
Topics: Deflection , Finite element methods , Optimization
Simultaneous Coordination of Two Rigid Body Motions Through Infinitesimally Separated Positions
M. N. Siddhanty, A. H. Soni
J. Eng. Ind. May 1975, 97(2): 527–531. doi: https://doi.org/10.1115/1.3438615
View articletitled, Simultaneous Coordination of Two Rigid Body Motions Through Infinitesimally Separated Positions
Open the PDF for in another window
Topics: Design
Stability Analysis of Lifting Rigs—Part 1: Necessary and Sufficient Conditions
R. W. Longman, F. Freudenstein
J. Eng. Ind. May 1975, 97(2): 532–536. doi: https://doi.org/10.1115/1.3438616
View articletitled, Stability Analysis of Lifting Rigs—Part 1: Necessary and Sufficient Conditions
Open the PDF for in another window
Topics: Stability , Manufacturing , Construction equipment , Cranes , Derricks , Stress
Stability Analysis of Lifting Rigs—Part 2: Sufficient Stability Criteria and Design Guidelines
R. W. Longman, F. Freudenstein
J. Eng. Ind. May 1975, 97(2): 537–541. doi: https://doi.org/10.1115/1.3438617
View articletitled, Stability Analysis of Lifting Rigs—Part 2: Sufficient Stability Criteria and Design Guidelines
Open the PDF for in another window
Topics: Design , Stability , Construction equipment , Cranes , Derricks
Dynamic Response of a High-Speed Slider-Crank Mechanism With an Elastic Connecting Rod
S.-C. Chu, K. C. Pan
J. Eng. Ind. May 1975, 97(2): 542–550. doi: https://doi.org/10.1115/1.3438618
View articletitled, Dynamic Response of a High-Speed Slider-Crank Mechanism With an Elastic Connecting Rod
Open the PDF for in another window
Topics: Dynamic response , Differential equations , Partial differential equations , Vibration , Damping , Deformation , Dynamic testing (Materials) , Free vibrations , Polynomials , Runge-Kutta methods
Dynamic Motion Analysis of Plane Mechanisms With Coulomb and Viscous Damping via the Joint Force Analysis
Cemil Bagci
J. Eng. Ind. May 1975, 97(2): 551–560. doi: https://doi.org/10.1115/1.3438619
View articletitled, Dynamic Motion Analysis of Plane Mechanisms With Coulomb and Viscous Damping via the Joint Force Analysis
Open the PDF for in another window
Topics: Coulombs , Damping , Bearings , Equilibrium (Physics) , Rotation , Switches , Torque
On the Analytical Lumped-Mass Model of an Elastic Four-Bar Mechanism
J. P. Sadler
J. Eng. Ind. May 1975, 97(2): 561–565. doi: https://doi.org/10.1115/1.3438620
View articletitled, On the Analytical Lumped-Mass Model of an Elastic Four-Bar Mechanism
Open the PDF for in another window
Topics: Computers , Deflection , Euler-Bernoulli beam theory , Linkages , Nonlinear differential equations , Steady state , Stress , Vibration
An Automated Method for Dynamic Analysis of Spatial Linkages for Biomechanical Applications
N. A. Langrana, D. L. Bartel
J. Eng. Ind. May 1975, 97(2): 566–574. doi: https://doi.org/10.1115/1.3438621
View articletitled, An Automated Method for Dynamic Analysis of Spatial Linkages for Biomechanical Applications
Open the PDF for in another window
Topics: Biomechanics , Dynamic analysis , Linkages , Equations of motion , Computer-aided engineering , Manufacturing , Springs
Displacement Analysis of the Generalized Clemens Coupling, The R-R-S-R-R Spatial Linkage
D. M. Wallace, F. Freudenstein
J. Eng. Ind. May 1975, 97(2): 575–580. doi: https://doi.org/10.1115/1.3438622
View articletitled, Displacement Analysis of the Generalized Clemens Coupling, The R-R-S-R-R Spatial Linkage
Open the PDF for in another window
Topics: Displacement , Linkages , Algebra , Degrees of freedom , Errors , Kinematics , Polynomials
The RCRRC Five-Link Space Mechanism—Displacement Analysis, Force and Torque Analysis and Its Transmission Criteria
Ing-Ping Jack Lee, Cemil Bagci
J. Eng. Ind. May 1975, 97(2): 581–594. doi: https://doi.org/10.1115/1.3438623
View articletitled, The RCRRC Five-Link Space Mechanism—Displacement Analysis, Force and Torque Analysis and Its Transmission Criteria
Open the PDF for in another window
Topics: Displacement , Torque , Dimensions , Inertia (Mechanics) , Polynomials , Screws , Unified field theories
Effect of Flexibility of Driving Shaft on the Dynamic Behavior of a Cam Mechanism
M. P. Koster
J. Eng. Ind. May 1975, 97(2): 595–602. doi: https://doi.org/10.1115/1.3438624
View articletitled, Effect of Flexibility of Driving Shaft on the Dynamic Behavior of a Cam Mechanism
Open the PDF for in another window
Topics: Camshafts , Design , Dynamic models , Dynamic response
Geneva Mechanisms Connected in Series
R. G. Fenton
J. Eng. Ind. May 1975, 97(2): 603–608. doi: https://doi.org/10.1115/1.3438625
View articletitled, Geneva Mechanisms Connected in Series
Open the PDF for in another window
Topics: Cycles , Kinematics , Shock (Mechanics) , Wheels
High-Speed Mechanism Design—A General Analytical Approach
Imdad Imam, George N. Sandor
J. Eng. Ind. May 1975, 97(2): 609–628. doi: https://doi.org/10.1115/1.3438626
View articletitled, High-Speed Mechanism Design—A General Analytical Approach
Open the PDF for in another window
Topics: Design , Deflection , Optimization , Stress , Kinematics , Nonlinear programming
Optimum Synthesis of Two-Degree-of-Freedom Planar and Spatial Function Generating Mechanisms Using the Penalty Function Approach
R. I. Alizade, A. V. Mohan Rao, G. N. Sandor
J. Eng. Ind. May 1975, 97(2): 629–634. doi: https://doi.org/10.1115/1.3438627
View articletitled, Optimum Synthesis of Two-Degree-of-Freedom Planar and Spatial Function Generating Mechanisms Using the Penalty Function Approach
Open the PDF for in another window
Topics: Algorithms , Approximation , Computer programming , Dimensions , Linkages , Mechanical admittance
A Parameter Identification Study of Kinematic Errors in Planar Mechanisms
S. Dubowsky, J. Maatuk, N. D. Perreira
J. Eng. Ind. May 1975, 97(2): 635–642. doi: https://doi.org/10.1115/1.3438628
View articletitled, A Parameter Identification Study of Kinematic Errors in Planar Mechanisms
Open the PDF for in another window
Topics: Errors , Kinematics , Clearances (Engineering) , Computers , Design , Machinery , Manufacturing , Materials properties , Optimization , Temperature gradient
Shaking Force Optimization of Four-Bar Linkage With Adjustable Constraints on Ground Bearing Forces
F. R. Tepper, G. G. Lowen
J. Eng. Ind. May 1975, 97(2): 643–651. doi: https://doi.org/10.1115/1.3438629
View articletitled, Shaking Force Optimization of Four-Bar Linkage With Adjustable Constraints on Ground Bearing Forces
Open the PDF for in another window
Topics: Bearings , Linkages , Optimization , Design
Dynamic Interactions of Link Elasticity and Clearance Connections in Planar Mechanical Systems
S. Dubowsky, T. N. Gardner
J. Eng. Ind. May 1975, 97(2): 652–661. doi: https://doi.org/10.1115/1.3438630
View articletitled, Dynamic Interactions of Link Elasticity and Clearance Connections in Planar Mechanical Systems
Open the PDF for in another window
Topics: Bearings , Clearances (Engineering) , Design , Displacement , Elasticity , Stress
Optimum Mechanism Design Combining Kinematic and Dynamic-Force Considerations
F. L. Conte, G. R. George, R. W. Mayne, J. P. Sadler
J. Eng. Ind. May 1975, 97(2): 662–670. doi: https://doi.org/10.1115/1.3438631
View articletitled, Optimum Mechanism Design Combining Kinematic and Dynamic-Force Considerations
Open the PDF for in another window
Topics: Design , Kinematics , Bearings , Computer-aided engineering , Nonlinear programming , Optimization , Torque
Matrix-Displacement–Direct-Element Method for Force and Torque Analysis of Determinate and Indeterminate Space Mechanisms With Arbitrary Skew Angles
R. L. Brasfield, Cemil Bagci
J. Eng. Ind. May 1975, 97(2): 671–681. doi: https://doi.org/10.1115/1.3438632
View articletitled, Matrix-Displacement–Direct-Element Method for Force and Torque Analysis of Determinate and Indeterminate Space Mechanisms With Arbitrary Skew Angles
Open the PDF for in another window
Topics: Displacement , Torque , Deformation , Elastic analysis , Stiffness , Bearings , Finite element methods , Space frame structures
Gross-Motion Dynamic Response Analysis of Indeterminate Mechanisms by Matrix Displacement Method
R. L. Brasfield, Cemil Bagci
J. Eng. Ind. May 1975, 97(2): 682–688. doi: https://doi.org/10.1115/1.3438633
View articletitled, Gross-Motion Dynamic Response Analysis of Indeterminate Mechanisms by Matrix Displacement Method
Open the PDF for in another window
Topics: Displacement , Dynamic response analysis , Equilibrium (Physics) , Oscillations , Robots
Selective Precision Synthesis—A General Method of Optimization for Planar Mechanisms
S. N. Kramer, G. N. Sandor
J. Eng. Ind. May 1975, 97(2): 689–701. doi: https://doi.org/10.1115/1.3438634
View articletitled, Selective Precision Synthesis—A General Method of Optimization for Planar Mechanisms
Open the PDF for in another window
Topics: Optimization , Construction , Computer software , Computer-aided design , Design , Dimensions , Linkages , Nonlinear programming , Stability
Adjustable Mechanisms for Exact Path Generation
F. J. Kay, R. E. Haws
J. Eng. Ind. May 1975, 97(2): 702–707. doi: https://doi.org/10.1115/1.3438635
View articletitled, Adjustable Mechanisms for Exact Path Generation
Open the PDF for in another window
Topics: Design , Linkages , Optimization , Pressure
Kinematic Properties of Tripode (Tri-pot) Joints
Metin M. Durum
J. Eng. Ind. May 1975, 97(2): 708–713. doi: https://doi.org/10.1115/1.3438636
View articletitled, Kinematic Properties of Tripode (Tri-pot) Joints
Open the PDF for in another window
Topics: Kinematics , Couplings , Cycles , Geometry , Rotation
The Analytical Synthesis of Complex Mechanisms for Combinations of Specified Geometric or Time Derivatives up to the Fourth Order
A. Myklebust, D. Tesar
J. Eng. Ind. May 1975, 97(2): 714–722. doi: https://doi.org/10.1115/1.3438637
View articletitled, The Analytical Synthesis of Complex Mechanisms for Combinations of Specified Geometric or Time Derivatives up to the Fourth Order
Open the PDF for in another window
Topics: Algebra
Kinematic Synthesis of Geared Spherical Five Bar Mechanisms for Function Generation
D. L. Riddle, D. Tesar, J. Duffy
J. Eng. Ind. May 1975, 97(2): 723–730. doi: https://doi.org/10.1115/1.3438638
View articletitled, Kinematic Synthesis of Geared Spherical Five Bar Mechanisms for Function Generation
Open the PDF for in another window
Topics: Design , Gear trains , Kinematics
Dynamics of a Current Collector for a High-Speed Railway
Kazuo Yoshida, Katsushi Manabe, Taro Shimogo
J. Eng. Ind. May 1975, 97(2): 731–738. doi: https://doi.org/10.1115/1.3438639
View articletitled, Dynamics of a Current Collector for a High-Speed Railway
Open the PDF for in another window
Topics: Computer simulation , Damping , Dynamics (Mechanics) , High speed rail , Probability , Railroads , Rails , Theoretical analysis , Trains
Kinematic Analysis of Spatial Mechanisms Via Successive Screw Displacements
Dilip Kohli, A. H. Soni
J. Eng. Ind. May 1975, 97(2): 739–747. doi: https://doi.org/10.1115/1.3438640
View articletitled, Kinematic Analysis of Spatial Mechanisms Via Successive Screw Displacements
Open the PDF for in another window
Topics: Kinematic analysis , Screws , Displacement
Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With Kt = 2.34
Dimitri Kececioglu, Louie B. Chester, Thomas M. Dodge
J. Eng. Ind. May 1975, 97(2): 748–760. doi: https://doi.org/10.1115/1.3438641
View articletitled, Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With <em>K<sub>t</sub></em> = 2.34
Open the PDF for in another window
Topics: Fatigue , Reliability , Steel , Torsion , Failure , Stress , Design , Cycles , Machinery , Stress concentration

Discussions

Discussion: “Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With Kt = 2.34” (Kececioglu, Dimitri, Chester, Louie B., and Dodge, Thomas M., 1975, ASME J. Eng. Ind., 97, pp. 748–760)
H. O. Fuchs
J. Eng. Ind. May 1975, 97(2): 760. doi: https://doi.org/10.1115/1.3438642
View articletitled, Discussion: “Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With <em>K<sub>t</sub></em> = 2.34” (Kececioglu, Dimitri, Chester, Louie B., and Dodge, Thomas M., 1975, ASME J. Eng. Ind., 97, pp. 748–760)
Open the PDF for in another window
Topics: Fatigue , Reliability , Steel , Torsion
Closure to “Discussion of ‘Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With Kt = 2.34’” (1975, ASME J. Eng. Ind., 97, p. 760)
Dimitri Kececioglu, Louie B. Chester, Thomas M. Dodge
J. Eng. Ind. May 1975, 97(2): 760–761. doi: https://doi.org/10.1115/1.3438643
View articletitled, Closure to “Discussion of ‘Combined Bending-Torsion Fatigue Reliability of AISI 4340 Steel Shafting With <em>K<sub>t</sub></em> = 2.34’” (1975, ASME J. Eng. Ind., 97, p. 760)
Open the PDF for in another window
Topics: Fatigue , Reliability , Steel , Torsion
Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
W. T. Chandler, R. J. Walter
J. Eng. Ind. May 1975, 97(2): 765–766. doi: https://doi.org/10.1115/1.3438645
View articletitled, Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
Open the PDF for in another window
Topics: Hydrogen , Pressure vessels , Steel
Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
L. M. Dvoracek
J. Eng. Ind. May 1975, 97(2): 766. doi: https://doi.org/10.1115/1.3438646
View articletitled, Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
Open the PDF for in another window
Topics: Hydrogen , Pressure vessels , Steel
Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
W. F. Brown, Jr.
J. Eng. Ind. May 1975, 97(2): 766. doi: https://doi.org/10.1115/1.3438647
View articletitled, Discussion: “Steels for Seamless Hydrogen Pressure Vessels” (Loginow, A. W., and Phelps, E. H., 1975, ASME J. Eng. Ind., 97, pp. 274–282)
Open the PDF for in another window
Topics: Hydrogen , Pressure vessels , Steel
Closure to “Discussions of ‘Steels for Seamless Hydrogen Pressure Vessels’” (1975, ASME J. Eng. Ind., 97, pp. 765–766)
A. W. Loginow, E. H. Phelps
J. Eng. Ind. May 1975, 97(2): 766–767. doi: https://doi.org/10.1115/1.3438648
View articletitled, Closure to “Discussions of ‘Steels for Seamless Hydrogen Pressure Vessels’” (1975, ASME J. Eng. Ind., 97, pp. 765–766)
Open the PDF for in another window
Topics: Hydrogen , Pressure , Steel

Technical Briefs

Rock Behavior Under Impulsive Loading
Hossein Mahban
J. Eng. Ind. May 1975, 97(2): 762–764. doi: https://doi.org/10.1115/1.3438644
View articletitled, Rock Behavior Under Impulsive Loading
Open the PDF for in another window
Topics: Rocks

Errata

Erratum: “Steels for Seamless Hydrogen Pressure Vessels” (Journal of Engineering for Industry, 1975, 97, pp. 274–282)
A. W. Loginow, E. H. Phelps
J. Eng. Ind. May 1975, 97(2): 768. doi: https://doi.org/10.1115/1.3438649
View articletitled, Erratum: “Steels for Seamless Hydrogen Pressure Vessels” (Journal of Engineering for Industry, 1975, 97, pp. 274–282)
Open the PDF for in another window
Topics: Hydrogen , Pressure vessels , Steel
All Issues
An Improved Iterative Predictive Model for Grinding Residual Stress Considering Material Microstructure Evolution
J. Manuf. Sci. Eng (May 2025)
Environmental and Economic Benefits of Harvesting Machine for Magnet-to-Magnet Recycling
J. Manuf. Sci. Eng (May 2025)
Material Lateral Position Guiding During Calendering Process Via Material Width Change Modeling and Model Predictive Control
J. Manuf. Sci. Eng (May 2025)
Adaptive Robot Motion Planning for Smart Manufacturing Based on Digital Twin and Bayesian Optimization-Enhanced Reinforcement Learning
J. Manuf. Sci. Eng (May 2025)
Study of deformation mechanism and surface formation of laser coupled ultrasonic vibration-assisted turning of SiCp/Al composites
J. Manuf. Sci. Eng
  • Online ISSN 1528-8935
  • Print ISSN 1087-1357

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept