Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 92, Issue 3
August 1970
This article was originally published in
Journal of Engineering for Industry
Issue Cover
ISSN 0022-0817
In this Issue

Research Papers

Development and Testing of a 56-In-Dia Jointed Glass Pressure Hull
D. W. Murphy
J. Eng. Ind. August 1970, 92(3): 517–522. doi: https://doi.org/10.1115/1.3427795
View articletitled, Development and Testing of a 56-In-Dia Jointed Glass Pressure Hull
Open the PDF for in another window
Topics: Glass , Hull , Pressure , Testing , Epoxy adhesives , Epoxy resins , Bearings , Cracking (Materials) , Cycles , Fracture (Process)
Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System
W. C. Caywood, George Dailey
J. Eng. Ind. August 1970, 92(3): 524–528. doi: https://doi.org/10.1115/1.3427797
View articletitled, Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System
Open the PDF for in another window
Topics: Cities , Dynamic response , Gravity (Force) , Transportation systems , Vacuum , Trains , Dampers , Springs , Automobiles , Computer software
Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation
S. N. Kramer, G. N. Sandor
J. Eng. Ind. August 1970, 92(3): 531–535. doi: https://doi.org/10.1115/1.3427800
View articletitled, Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation
Open the PDF for in another window
Topics: Kinematics , Approximation , Computation , Design , Gears , Optimization
A Method of Relating Factor of Safety and Reliability
C. Mischke
J. Eng. Ind. August 1970, 92(3): 537–541. doi: https://doi.org/10.1115/1.3427803
View articletitled, A Method of Relating Factor of Safety and Reliability
Open the PDF for in another window
Topics: Reliability , Safety engineering , Engineers , Theorems (Mathematics) , Weight (Mass)
The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity
A. O. Lebeck, E. I. Radzimovsky
J. Eng. Ind. August 1970, 92(3): 543–551. doi: https://doi.org/10.1115/1.3427805
View articletitled, The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity
Open the PDF for in another window
Topics: Shapes , Spur gears , Stress , Gears , Bending strength , Geometry
On the Theory of the Hydraulic Gyroscope
G. A. Fazekas, T. M. Grubbs
J. Eng. Ind. August 1970, 92(3): 554–558. doi: https://doi.org/10.1115/1.3427809
View articletitled, On the Theory of the Hydraulic Gyroscope
Open the PDF for in another window
Topics: Approximation , Belts , Drive chain , Flow (Dynamics) , Hydraulic drive systems , Particulate matter , Torque
Unique Descriptions of All Spherical Four-Bar Linkages
Michael Savage, A. S. Hall, Jr.
J. Eng. Ind. August 1970, 92(3): 559–563. doi: https://doi.org/10.1115/1.3427812
View articletitled, Unique Descriptions of All Spherical Four-Bar Linkages
Open the PDF for in another window
Topics: Linkages
Progress in Railway Mechanical Engineering, Cars and Equipment, 1968–1969
N. E. Bateson, P. H. Baker, F. W. Schulz, W. P. Manos, Tom Shedd
J. Eng. Ind. August 1970, 92(3): 567–580. doi: https://doi.org/10.1115/1.3427815
View articletitled, Progress in Railway Mechanical Engineering, Cars and Equipment, 1968–1969
Open the PDF for in another window
Topics: Automobiles , Mechanical engineering , Railroads , Locomotives , Freight cars
Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars
F. Freudenstein
J. Eng. Ind. August 1970, 92(3): 581–588. doi: https://doi.org/10.1115/1.3427816
View articletitled, Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars
Open the PDF for in another window
Topics: Dynamic analysis , Freight cars , Shock absorbers , Classical mechanics , Coulombs , Damping , Design , Dynamic systems , Friction , Sliding friction
The Effect of Disposable Load Drop on the Range of Aircraft
Milton J. Thompson
J. Eng. Ind. August 1970, 92(3): 590–594. doi: https://doi.org/10.1115/1.3427820
View articletitled, The Effect of Disposable Load Drop on the Range of Aircraft
Open the PDF for in another window
Topics: Aircraft , Stress , Weight (Mass) , Flight , Fuels , Propellers
Influence of Lay Barge Motions on a Deepwater Pipeline Laid Under Tension
W. V. Brewer, D. A. Dixon
J. Eng. Ind. August 1970, 92(3): 595–604. doi: https://doi.org/10.1115/1.3427821
View articletitled, Influence of Lay Barge Motions on a Deepwater Pipeline Laid Under Tension
Open the PDF for in another window
Topics: Pipelines , Tension , Water , Seabed , Surges , Pipes , Shapes , Stiffness , Stress
Design of Heated Cylindrical Pressure Vessels in Transient Creep
H. Kraus, W. F. Siddall, C. W. Lawton
J. Eng. Ind. August 1970, 92(3): 605–612. doi: https://doi.org/10.1115/1.3427822
View articletitled, Design of Heated Cylindrical Pressure Vessels in Transient Creep
Open the PDF for in another window
Topics: Creep , Design , Pressure vessels , Transients (Dynamics) , Temperature , Stress , ASME Boiler and Pressure Vessel Code , Boilers , Cylinders , Fatigue life
Advance Biowaste Electric Propulsion Systems
M. Goodman, M. M. Yakut
J. Eng. Ind. August 1970, 92(3): 613–620. doi: https://doi.org/10.1115/1.3427823
View articletitled, Advance Biowaste Electric Propulsion Systems
Open the PDF for in another window
Topics: Electric propulsion , Propellants , Computers , Cycles , Electricity (Physics) , Heating , Impulse (Physics) , Oxygen , Plumes (Fluid dynamics) , Space stations
Earth Orbital Mission Requirements for Secondary Propulsion Systems and Their Impact on Colloid Systems
Ralph A. Benson
J. Eng. Ind. August 1970, 92(3): 621–627. doi: https://doi.org/10.1115/1.3427824
View articletitled, Earth Orbital Mission Requirements for Secondary Propulsion Systems and Their Impact on Colloid Systems
Open the PDF for in another window
Topics: Propulsion , Propulsion systems , Satellites , Thrust , Touch (physiological)
A Bayesian Model of Machining Economics for Optimization by Adaptive Control
Donald S. Ermer
J. Eng. Ind. August 1970, 92(3): 628–632. doi: https://doi.org/10.1115/1.3427825
View articletitled, A Bayesian Model of Machining Economics for Optimization by Adaptive Control
Open the PDF for in another window
Topics: Adaptive control , Economics , Machining , Optimization , Wear , Cutting , Machinery , Turning
Some Applications of State and Parameter Estimation to Machine Tool Problems: I—Applications of Nonsequential Estimation
Russell F. Henke
J. Eng. Ind. August 1970, 92(3): 633–646. doi: https://doi.org/10.1115/1.3427826
View articletitled, Some Applications of State and Parameter Estimation to Machine Tool Problems: I—Applications of Nonsequential Estimation
Open the PDF for in another window
Topics: Machine tools , Parameter estimation , Cutting , Dynamic models , Algorithms , Computers , Damping , Metal cutting , Optimal control , Stiffness
An Analysis of Drill Geometry for Optimum Drill Design by Computer. Part I—Drill Geometry Analysis
S. Fujii, M. F. DeVries, S. M. Wu
J. Eng. Ind. August 1970, 92(3): 647–656. doi: https://doi.org/10.1115/1.3427827
View articletitled, An Analysis of Drill Geometry for Optimum Drill Design by Computer. Part I—Drill Geometry Analysis
Open the PDF for in another window
Topics: Computers , Design , Drills (Tools) , Geometry , Cross section (Physics)
An Analysis of Drill Geometry for Optimum Drill Design by Computer. Part II—Computer-Aided Design
S. Fujii, M. F. DeVries, S. M. Wu
J. Eng. Ind. August 1970, 92(3): 657–666. doi: https://doi.org/10.1115/1.3427828
View articletitled, An Analysis of Drill Geometry for Optimum Drill Design by Computer. Part II—Computer-Aided Design
Open the PDF for in another window
Topics: Computer-aided design , Computers , Design , Drills (Tools) , Geometry , Computer software , Cutting , Grinding
Selection of Sampling Parameters for Modeling Grinding Wheels
S. J. Deutsch, S. M. Wu
J. Eng. Ind. August 1970, 92(3): 667–676. doi: https://doi.org/10.1115/1.3427829
View articletitled, Selection of Sampling Parameters for Modeling Grinding Wheels
Open the PDF for in another window
Topics: Grinding wheels , Modeling , Wheels , Approximation
Tolerancing the Components of an Assembly for Minimum Cost
J. Peters
J. Eng. Ind. August 1970, 92(3): 677–682. doi: https://doi.org/10.1115/1.3427830
View articletitled, Tolerancing the Components of an Assembly for Minimum Cost
Open the PDF for in another window
Topics: Manufacturing
The Effect of Parameter Variations in Precision Grinding
Richard P. Lindsay
J. Eng. Ind. August 1970, 92(3): 683–693. doi: https://doi.org/10.1115/1.3427831
View articletitled, The Effect of Parameter Variations in Precision Grinding
Open the PDF for in another window
Topics: Grinding , Cycles , Machining , Diamonds , Finishes , Geometry , Probability , Wear , Wheels
Performance of an Orienting Device Employed in Vibratory Bowl Feeders
G. Boothroyd, L. E. Murch
J. Eng. Ind. August 1970, 92(3): 694–698. doi: https://doi.org/10.1115/1.3427832
View articletitled, Performance of an Orienting Device Employed in Vibratory Bowl Feeders
Open the PDF for in another window
Topics: Design , Errors , Statistical analysis
Evaluation of the Effects of Design Variables on Drill Temperature Responses
M. F. DeVries, S. M. Wu
J. Eng. Ind. August 1970, 92(3): 699–705. doi: https://doi.org/10.1115/1.3427833
View articletitled, Evaluation of the Effects of Design Variables on Drill Temperature Responses
Open the PDF for in another window
Topics: Design , Drills (Tools) , Temperature , Thermocouples , Transients (Dynamics) , Wear
A Technique for Accelerated Life Testing
E. Rabinowicz, R. H. McEntire, B. Shiralkar
J. Eng. Ind. August 1970, 92(3): 706–710. doi: https://doi.org/10.1115/1.3427834
View articletitled, A Technique for Accelerated Life Testing
Open the PDF for in another window
Topics: Accelerated life testing , Bearings , Damage , Drills (Tools) , Electric motors , Failure , Testing
Regression Analysis for Predicting Surface Finish and Its Application in the Determination of Optimum Machining Conditions
A. Bhattacharyya, R. Fari´a-Gonza´lez, Inyong Ham
J. Eng. Ind. August 1970, 92(3): 711–714. doi: https://doi.org/10.1115/1.3427835
View articletitled, Regression Analysis for Predicting Surface Finish and Its Application in the Determination of Optimum Machining Conditions
Open the PDF for in another window
Topics: Finishes , Machining , Regression analysis

Discussions

Discussion: “Development and Testing of a 56-In-Dia Jointed Glass Pressure Hull” (Murphy, D. W., 1970, ASME J. Eng. Ind., 92, pp. 517–522)
W. R. Forman
J. Eng. Ind. August 1970, 92(3): 523. doi: https://doi.org/10.1115/1.3427796
View articletitled, Discussion: “Development and Testing of a 56-In-Dia Jointed Glass Pressure Hull” (Murphy, D. W., 1970, ASME J. Eng. Ind., 92, pp. 517–522)
Open the PDF for in another window
Topics: Glass , Hull , Pressure , Testing
Discussion: “Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System” (Caywood, W. C., and Dailey, George, 1970, ASME J. Eng. Ind., 92, pp. 524–528)
Bruce E. Skov
J. Eng. Ind. August 1970, 92(3): 528–530. doi: https://doi.org/10.1115/1.3427798
View articletitled, Discussion: “Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System” (Caywood, W. C., and Dailey, George, 1970, ASME J. Eng. Ind., 92, pp. 524–528)
Open the PDF for in another window
Topics: Cities , Dynamic response , Gravity (Force) , Transportation systems , Vacuum
Closure to “Discussion of ‘Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System’” (1970, ASME J. Eng. Ind., 92, pp. 528–530)
W. C. Caywood, George Dailey
J. Eng. Ind. August 1970, 92(3): 530. doi: https://doi.org/10.1115/1.3427799
View articletitled, Closure to “Discussion of ‘Dynamic Response Characteristics of the Urban Gravity-Vacuum Transit System’” (1970, ASME J. Eng. Ind., 92, pp. 528–530)
Open the PDF for in another window
Topics: Cities , Dynamic response , Gravity (Force) , Vacuum
Discussion: “Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation” (Kramer, S. N., and Sandor, G. N., 1970, ASME J. Eng. Ind., 92, pp. 531–535)
A. G. Erdman
J. Eng. Ind. August 1970, 92(3): 536. doi: https://doi.org/10.1115/1.3427801
View articletitled, Discussion: “Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation” (Kramer, S. N., and Sandor, G. N., 1970, ASME J. Eng. Ind., 92, pp. 531–535)
Open the PDF for in another window
Topics: Kinematics
Closure to “Discussion of ‘Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation’” (1970, ASME J. Eng. Ind., 92, p. 536)
S. N. Kramer, G. N. Sandor
J. Eng. Ind. August 1970, 92(3): 536. doi: https://doi.org/10.1115/1.3427802
View articletitled, Closure to “Discussion of ‘Finite Kinematic Synthesis of a Cycloidal-Crank Mechanism for Function Generation’” (1970, ASME J. Eng. Ind., 92, p. 536)
Open the PDF for in another window
Topics: Kinematics
Discussion: “A Method of Relating Factor of Safety and Reliability” (Mischke, C., 1970, ASME J. Eng. Ind., 92, pp. 537–541)
Joseph E. Shigley
J. Eng. Ind. August 1970, 92(3): 541–542. doi: https://doi.org/10.1115/1.3427804
View articletitled, Discussion: “A Method of Relating Factor of Safety and Reliability” (Mischke, C., 1970, ASME J. Eng. Ind., 92, pp. 537–541)
Open the PDF for in another window
Topics: Reliability , Safety engineering
Discussion: “The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity” (Lebeck, A. O., and Radzimovsky, E. I., 1970, ASME J. Eng. Ind., 92, pp. 543–551)
W. Coleman
J. Eng. Ind. August 1970, 92(3): 551–552. doi: https://doi.org/10.1115/1.3427806
View articletitled, Discussion: “The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity” (Lebeck, A. O., and Radzimovsky, E. I., 1970, ASME J. Eng. Ind., 92, pp. 543–551)
Open the PDF for in another window
Topics: Shapes , Spur gears , Stress
Discussion: “The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity” (Lebeck, A. O., and Radzimovsky, E. I., 1970, ASME J. Eng. Ind., 92, pp. 543–551)
M. J. French
J. Eng. Ind. August 1970, 92(3): 552. doi: https://doi.org/10.1115/1.3427807
View articletitled, Discussion: “The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity” (Lebeck, A. O., and Radzimovsky, E. I., 1970, ASME J. Eng. Ind., 92, pp. 543–551)
Open the PDF for in another window
Topics: Shapes , Spur gears , Stress
Closure to “Discussions of ‘The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity’” (1970, ASME J. Eng. Ind., 92, pp. 551–552)
A. O. Lebeck, E. I. Radzimovsky
J. Eng. Ind. August 1970, 92(3): 552–553. doi: https://doi.org/10.1115/1.3427808
View articletitled, Closure to “Discussions of ‘The Synthesis of Tooth Profile Shapes and Spur Gears of High Load Capacity’” (1970, ASME J. Eng. Ind., 92, pp. 551–552)
Open the PDF for in another window
Topics: Shapes , Spur gears , Stress
Discussion: “On the Theory of the Hydraulic Gyroscope” (Fazekas, G. A., and Grubbs, T. M., 1970, ASME J. Eng. Ind., 92, pp. 554–558)
J. R. Curreri
J. Eng. Ind. August 1970, 92(3): 558. doi: https://doi.org/10.1115/1.3427810
View articletitled, Discussion: “On the Theory of the Hydraulic Gyroscope” (Fazekas, G. A., and Grubbs, T. M., 1970, ASME J. Eng. Ind., 92, pp. 554–558)
Open the PDF for in another window
Closure to “Discussion of ‘On the Theory of the Hydraulic Gyroscope’” (1970, ASME J. Eng. Ind., 92, p. 558)
G. A. Fazekas, T. M. Grubbs
J. Eng. Ind. August 1970, 92(3): 558. doi: https://doi.org/10.1115/1.3427811
View articletitled, Closure to “Discussion of ‘On the Theory of the Hydraulic Gyroscope’” (1970, ASME J. Eng. Ind., 92, p. 558)
Open the PDF for in another window
Discussion: “Unique Descriptions of All Spherical Four-Bar Linkages” (Savage, Michael, and Hall, Jr., A. S., 1970, ASME J. Eng. Ind., 92, pp. 559–563)
A. H. Soni
J. Eng. Ind. August 1970, 92(3): 563–566. doi: https://doi.org/10.1115/1.3427813
View articletitled, Discussion: “Unique Descriptions of All Spherical Four-Bar Linkages” (Savage, Michael, and Hall, Jr., A. S., 1970, ASME J. Eng. Ind., 92, pp. 559–563)
Open the PDF for in another window
Topics: Linkages
Closure to “Discussion of ‘Unique Descriptions of All Spherical Four-Bar Linkages’” (1970, ASME J. Eng. Ind., 92, pp. 563–566)
Michael Savage, A. S. Hall, Jr.
J. Eng. Ind. August 1970, 92(3): 566. doi: https://doi.org/10.1115/1.3427814
View articletitled, Closure to “Discussion of ‘Unique Descriptions of All Spherical Four-Bar Linkages’” (1970, ASME J. Eng. Ind., 92, pp. 563–566)
Open the PDF for in another window
Discussion: “Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars” (Freudenstein, F., 1970, ASME J. Eng. Ind., 92, pp. 581–588)
H. T. Hastings
J. Eng. Ind. August 1970, 92(3): 588. doi: https://doi.org/10.1115/1.3427817
View articletitled, Discussion: “Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars” (Freudenstein, F., 1970, ASME J. Eng. Ind., 92, pp. 581–588)
Open the PDF for in another window
Topics: Dynamic analysis , Freight cars , Shock absorbers
Discussion: “Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars” (Freudenstein, F., 1970, ASME J. Eng. Ind., 92, pp. 581–588)
W. P. Manos
J. Eng. Ind. August 1970, 92(3): 588–589. doi: https://doi.org/10.1115/1.3427818
View articletitled, Discussion: “Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars” (Freudenstein, F., 1970, ASME J. Eng. Ind., 92, pp. 581–588)
Open the PDF for in another window
Topics: Dynamic analysis , Freight cars , Shock absorbers
Closure to “Discussions of ‘Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars’” (1970, ASME J. Eng. Ind., 92, pp. 588–589)
F. Freudenstein
J. Eng. Ind. August 1970, 92(3): 589. doi: https://doi.org/10.1115/1.3427819
View articletitled, Closure to “Discussions of ‘Dynamic Analysis of Long-Travel, High-Efficiency Shock Absorbers in Freight Cars’” (1970, ASME J. Eng. Ind., 92, pp. 588–589)
Open the PDF for in another window
Topics: Dynamic analysis , Shock absorbers

Errata

Erratum: “An Analysis of Punching Variables by Two-Level Fractional Factorial Design” (Journal of Engineering for Industry, 1970, 92, pp. 435–443)
K. K. Wang, Khalil Taraman, S. M. Wu
J. Eng. Ind. August 1970, 92(3): 715–716. doi: https://doi.org/10.1115/1.3427836
View articletitled, Erratum: “An Analysis of Punching Variables by Two-Level Fractional Factorial Design” (Journal of Engineering for Industry, 1970, 92, pp. 435–443)
Open the PDF for in another window
Topics: Design , Punching (Metalworking)
All Issues
Effect of Microgravity on the Metal Droplet Transfer and Bead Characteristics in the Directed Energy Deposition-Arc Process
J. Manuf. Sci. Eng (December 2024)
Reducing Laser Exposure Time of PBF-LB/P by Providing High Energy Without Thermal Degradation and Its Effect on Part Strength and Process Time
J. Manuf. Sci. Eng (January 2025)
Femtosecond Pulsed Laser Machining of Fused Silica for Micro-Cavities With Sharp Corners
J. Manuf. Sci. Eng (January 2025)
Acquired Angle Error Correction Based on Variation of an Angle Detection Signal Intensity in Rotary Encoders
J. Manuf. Sci. Eng (January 2025)
A Simple Approach to Transient-State Modeling of Nitrogen Cooling in the Extrusion of Light-Alloy Complex Profiles
J. Manuf. Sci. Eng (February 2025)
  • Online ISSN 1528-8935
  • Print ISSN 1087-1357

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2024 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept