Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 84, Issue 1
February 1962
This article was originally published in
Journal of Engineering for Industry
Issue Cover
ISSN 0022-0817
In this Issue

Research Papers

Thermal Design for Microminiaturized Circuitry
H. C. Kammerer
J. Eng. Ind. February 1962, 84(1): 1–7. doi: https://doi.org/10.1115/1.3667427
View articletitled, Thermal Design for Microminiaturized Circuitry
Open the PDF for in another window
Topics: Design , Circuits , Temperature , Circuit design , Computers , Cooling , Density , Manufacturing , Packing (Shipments) , Packings (Cushioning)
The Use of Derivative Pressure Feedback in High Performance Hydraulic Servomechanisms
T. R. Welch
J. Eng. Ind. February 1962, 84(1): 8–14. doi: https://doi.org/10.1115/1.3667449
View articletitled, The Use of Derivative Pressure Feedback in High Performance Hydraulic Servomechanisms
Open the PDF for in another window
Topics: Feedback , Hydraulic servomechanisms , Pressure , Resonance , Servomechanisms , Corners (Structural elements) , Displacement , Filters , Fluids , Stress
Measurement of Four-Pole Parameters of Complex Structures
F. B. Safford
J. Eng. Ind. February 1962, 84(1): 15–20. doi: https://doi.org/10.1115/1.3667399
View articletitled, Measurement of Four-Pole Parameters of Complex Structures
Open the PDF for in another window
Topics: Poles (Building) , Stress , Excitation systems
Application of Four-Pole Parameters to Torsional Vibration Problems
C. T. Molloy
J. Eng. Ind. February 1962, 84(1): 21–34. doi: https://doi.org/10.1115/1.3667429
View articletitled, Application of Four-Pole Parameters to Torsional Vibration Problems
Open the PDF for in another window
Topics: Poles (Building) , Vibration , Circuits , Construction , Dampers , Disks , Gears , Theorems (Mathematics)
On Thermal Stresses in Cylinders Subjected to γ-Ray Heating
N. A. Weil
J. Eng. Ind. February 1962, 84(1): 35–41. doi: https://doi.org/10.1115/1.3667430
View articletitled, On Thermal Stresses in Cylinders Subjected to γ-Ray Heating
Open the PDF for in another window
Topics: Cylinders , Heating , Thermal stresses , Approximation , Heat , Radiation (Physics) , Stress
Catalytic Filtration of Ozone in Airborne Application
John E. Boberg, Myron Levine
J. Eng. Ind. February 1962, 84(1): 42–47. doi: https://doi.org/10.1115/1.3667432
View articletitled, Catalytic Filtration of Ozone in Airborne Application
Open the PDF for in another window
Topics: Aircraft , Filters , Filtration , Temperature
Comparative Effect of Land and Crater Wear on Tool Life When Dry Cutting, Mist Cooling, and Flood Cooling
D. Kececioglu, A. S. Sorensen, Jr.
J. Eng. Ind. February 1962, 84(1): 49–52. doi: https://doi.org/10.1115/1.3667436
View articletitled, Comparative Effect of Land and Crater Wear on Tool Life When Dry Cutting, Mist Cooling, and Flood Cooling
Open the PDF for in another window
Topics: Cooling , Cutting , Floods , Wear , Machining , Steel
Flank Friction Studies With Carbide Tools Reveal Sublayer Plastic Flow
E. G. Thomsen, A. G. MacDonald, S. Kobayashi
J. Eng. Ind. February 1962, 84(1): 53–62. doi: https://doi.org/10.1115/1.3667438
View articletitled, Flank Friction Studies With Carbide Tools Reveal Sublayer Plastic Flow
Open the PDF for in another window
Topics: Carbide cutting tools , Deformation , Friction , Steel , Temperature , Aluminum alloys , Flow (Dynamics) , Wear , Brass (Metal) , Clearances (Engineering)
Metal-Cutting Analysis—I: Re-Evaluation and New Method of Presentation of Theories
S. Kobayashi, E. G. Thomsen
J. Eng. Ind. February 1962, 84(1): 63–70. doi: https://doi.org/10.1115/1.3667440
View articletitled, Metal-Cutting Analysis—I: Re-Evaluation and New Method of Presentation of Theories
Open the PDF for in another window
Topics: Metal cutting
Metal-Cutting Analysis—II: New Parameters
S. Kobayashi, E. G. Thomsen
J. Eng. Ind. February 1962, 84(1): 71–79. doi: https://doi.org/10.1115/1.3667441
View articletitled, Metal-Cutting Analysis—II: New Parameters
Open the PDF for in another window
Topics: Metal cutting , Machining , Cutting , Friction , Machinability , Shear strength , Stress , Theorems (Mathematics)
Strain Rate Distribution During Experimental Metal Rolling
K. S. Yajnik, J. Frisch
J. Eng. Ind. February 1962, 84(1): 81–88. doi: https://doi.org/10.1115/1.3667446
View articletitled, Strain Rate Distribution During Experimental Metal Rolling
Open the PDF for in another window
Topics: Deformation , Metals , Strips , Torque
Free Machining Steel—IV: Tools With Reduced Contact Length
E. Usui, M. C. Shaw
J. Eng. Ind. February 1962, 84(1): 89–98. doi: https://doi.org/10.1115/1.3667448
View articletitled, Free Machining Steel—IV: Tools With Reduced Contact Length
Open the PDF for in another window
Topics: Machining , Steel , Finishes , Cutting , Lubricants , Cooling , Fluids , Stability , Stress , Sulfur
A Graphical Analysis of Regenerative Machine Tool Instability
J. P. Gurney, S. A. Tobias
J. Eng. Ind. February 1962, 84(1): 103–111. doi: https://doi.org/10.1115/1.3667380
View articletitled, A Graphical Analysis of Regenerative Machine Tool Instability
Open the PDF for in another window
Topics: Machine tools , Chatter , Drilling , Cutting , Machinery , Stability
On Determining the Hardness of Grinding Wheels—I
L. V. Colwell, R. O. Lane, K. N. Soderlund
J. Eng. Ind. February 1962, 84(1): 113–126. doi: https://doi.org/10.1115/1.3667383
View articletitled, On Determining the Hardness of Grinding Wheels—I
Open the PDF for in another window
Topics: Grinding wheels , Abrasives , Elastic constants , Grinding , Manufacturing , Rolling contact , Steel , Wheels
The Superposition of Stress Concentration Factors
Frank W. Paul, Jr., Thomas R. Faucett
J. Eng. Ind. February 1962, 84(1): 129–132. doi: https://doi.org/10.1115/1.3667387
View articletitled, The Superposition of Stress Concentration Factors
Open the PDF for in another window
Topics: Stress concentration , Stress , Brittleness , Mathematical analysis
Synthesis of Rectilinear Motion by Mechanical Harmonic Function Generators
Bernard W. Shaffer, Irvin Krause
J. Eng. Ind. February 1962, 84(1): 135–143. doi: https://doi.org/10.1115/1.3667392
View articletitled, Synthesis of Rectilinear Motion by Mechanical Harmonic Function Generators
Open the PDF for in another window
Topics: Approximation , Dimensions , Errors , Fourier series , Generators
Thermal Stresses in Spherical Case-Bonded Propellant Grains
Irvin Krause, Bernard W. Shaffer
J. Eng. Ind. February 1962, 84(1): 144–148. doi: https://doi.org/10.1115/1.3667394
View articletitled, Thermal Stresses in Spherical Case-Bonded Propellant Grains
Open the PDF for in another window
Topics: Propellants , Thermal stresses , Stress , Design , Manufacturing , Shear stress , Temperature distribution
Maximum Stresses in Beams and Plates Vibrating at Resonance
Eric E. Ungar
J. Eng. Ind. February 1962, 84(1): 149–155. doi: https://doi.org/10.1115/1.3667396
View articletitled, Maximum Stresses in Beams and Plates Vibrating at Resonance
Open the PDF for in another window
Topics: Plates (structures) , Resonance , Stress , Computation , Design , Simply supported beams
On the Variety of Motions Generated by Mechanisms
Ferdinand Freudenstein
J. Eng. Ind. February 1962, 84(1): 156–159. doi: https://doi.org/10.1115/1.3667397
View articletitled, On the Variety of Motions Generated by Mechanisms
Open the PDF for in another window
Topics: Theorems (Mathematics)
Constant Diameter Cams, Their Properties and Design Characteristics
Karl Brunell
J. Eng. Ind. February 1962, 84(1): 161–164. doi: https://doi.org/10.1115/1.3667402
View articletitled, Constant Diameter Cams, Their Properties and Design Characteristics
Open the PDF for in another window
Topics: Cams , Design
Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer
T. Finkelstein
J. Eng. Ind. February 1962, 84(1): 165–178. doi: https://doi.org/10.1115/1.3667408
View articletitled, Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer
Open the PDF for in another window
Topics: Computers , Machinery , Cycles , Flow (Dynamics) , Heat transfer , Heat , Heat pumps , Temperature
An Axial-Flow Porous Plug Apparatus
R. C. King, J. H. Potter
J. Eng. Ind. February 1962, 84(1): 180–188. doi: https://doi.org/10.1115/1.3667414
View articletitled, An Axial-Flow Porous Plug Apparatus
Open the PDF for in another window
Topics: Axial flow , Flow (Dynamics) , Joules , Convection , Design , Engineering prototypes , Heat , Heat shielding , Leakage , Nitrogen
Tensions in Straight and Curvilinear Belt Conveyers
W. A. Winkler
J. Eng. Ind. February 1962, 84(1): 191–195. doi: https://doi.org/10.1115/1.3667420
View articletitled, Tensions in Straight and Curvilinear Belt Conveyers
Open the PDF for in another window
Topics: Belts , Design , Tension , Horsepower

Discussions

Discussion: “Catalytic Filtration of Ozone in Airborne Application” (Boberg, John E., and Levine, Myron, 1962, ASME J. Eng. Ind., 84, pp. 42–47)
W. V. Blockley
J. Eng. Ind. February 1962, 84(1): 47–48. doi: https://doi.org/10.1115/1.3667433
View articletitled, Discussion: “Catalytic Filtration of Ozone in Airborne Application” (Boberg, John E., and Levine, Myron, 1962, ASME J. Eng. Ind., 84, pp. 42–47)
Open the PDF for in another window
Topics: Filtration
Closure to “Discussion of ‘Catalytic Filtration of Ozone in Airborne Application’” (1962, ASME J. Eng. Ind., 84, pp. 47–48)
John E. Boberg, Myron Levine
J. Eng. Ind. February 1962, 84(1): 48. doi: https://doi.org/10.1115/1.3667435
View articletitled, Closure to “Discussion of ‘Catalytic Filtration of Ozone in Airborne Application’” (1962, ASME J. Eng. Ind., 84, pp. 47–48)
Open the PDF for in another window
Topics: Filtration
Discussion: “Metal-Cutting Analysis—II: New Parameters” (Kobayashi, S., and Thomsen, E. G., 1962, ASME J. Eng. Ind., 84, pp. 71–79)
M. Kronenberg
J. Eng. Ind. February 1962, 84(1): 79–80. doi: https://doi.org/10.1115/1.3667443
View articletitled, Discussion: “Metal-Cutting Analysis—II: New Parameters” (Kobayashi, S., and Thomsen, E. G., 1962, ASME J. Eng. Ind., 84, pp. 71–79)
Open the PDF for in another window
Topics: Metal cutting
Closure to “Discussion of ‘Metal-Cutting Analysis—II: New Parameters’” (1962, ASME J. Eng. Ind., 84, pp. 79–80)
S. Kobayashi, E. G. Thomsen
J. Eng. Ind. February 1962, 84(1): 80. doi: https://doi.org/10.1115/1.3667445
View articletitled, Closure to “Discussion of ‘Metal-Cutting Analysis—II: New Parameters’” (1962, ASME J. Eng. Ind., 84, pp. 79–80)
Open the PDF for in another window
Topics: Metal cutting
Discussion: “Free Machining Steel—IV: Tools With Reduced Contact Length” (Usui, E., and Shaw, M. C., 1962, ASME J. Eng. Ind., 84, pp. 89–98)
Paul Albrecht
J. Eng. Ind. February 1962, 84(1): 98–101. doi: https://doi.org/10.1115/1.3667450
View articletitled, Discussion: “Free Machining Steel—IV: Tools With Reduced Contact Length” (Usui, E., and Shaw, M. C., 1962, ASME J. Eng. Ind., 84, pp. 89–98)
Open the PDF for in another window
Topics: Machining , Steel
Closure to “Discussion of ‘Free Machining Steel—IV: Tools With Reduced Contact Length’” (1962, ASME J. Eng. Ind., 84, pp. 89–101)
E. Usui, M. C. Shaw
J. Eng. Ind. February 1962, 84(1): 101–102. doi: https://doi.org/10.1115/1.3667379
View articletitled, Closure to “Discussion of ‘Free Machining Steel—IV: Tools With Reduced Contact Length’” (1962, ASME J. Eng. Ind., 84, pp. 89–101)
Open the PDF for in another window
Topics: Machining , Steel
Discussion: “A Graphical Analysis of Regenerative Machine Tool Instability” (Gurney, J. P., and Tobias, S. A., 1962, ASME J. Eng. Ind., 84, pp. 103–111)
R. S. Hahn
J. Eng. Ind. February 1962, 84(1): 111–112. doi: https://doi.org/10.1115/1.3667381
View articletitled, Discussion: “A Graphical Analysis of Regenerative Machine Tool Instability” (Gurney, J. P., and Tobias, S. A., 1962, ASME J. Eng. Ind., 84, pp. 103–111)
Open the PDF for in another window
Topics: Machine tools
Closure to “Discussion of ‘A Graphical Analysis of Regenerative Machine Tool Instability’” (1962, ASME J. Eng. Ind., 84, pp. 111–112)
J. P. Gurney, S. A. Tobias
J. Eng. Ind. February 1962, 84(1): 112. doi: https://doi.org/10.1115/1.3667382
View articletitled, Closure to “Discussion of ‘A Graphical Analysis of Regenerative Machine Tool Instability’” (1962, ASME J. Eng. Ind., 84, pp. 111–112)
Open the PDF for in another window
Topics: Machine tools
Discussion: “On Determining the Hardness of Grinding Wheels—I” (Colwell, L. V., Lane, R. O., and Soderlund, K. N., 1962, ASME J. Eng. Ind., 84, pp. 113–126)
R. S. Hahn
J. Eng. Ind. February 1962, 84(1): 126–127. doi: https://doi.org/10.1115/1.3667384
View articletitled, Discussion: “On Determining the Hardness of Grinding Wheels—I” (Colwell, L. V., Lane, R. O., and Soderlund, K. N., 1962, ASME J. Eng. Ind., 84, pp. 113–126)
Open the PDF for in another window
Topics: Grinding wheels
Discussion: “On Determining the Hardness of Grinding Wheels—I” (Colwell, L. V., Lane, R. O., and Soderlund, K. N., 1962, ASME J. Eng. Ind., 84, pp. 113–126)
L. P. Tarasov
J. Eng. Ind. February 1962, 84(1): 128. doi: https://doi.org/10.1115/1.3667385
View articletitled, Discussion: “On Determining the Hardness of Grinding Wheels—I” (Colwell, L. V., Lane, R. O., and Soderlund, K. N., 1962, ASME J. Eng. Ind., 84, pp. 113–126)
Open the PDF for in another window
Topics: Grinding wheels
Closure to “Discussions of ‘On Determining the Hardness of Grinding Wheels—I’” (1962, ASME J. Eng. Ind., 84, pp. 126–128)
L. V. Colwell, R. O. Lane, K. N. Soderlund
J. Eng. Ind. February 1962, 84(1): 128. doi: https://doi.org/10.1115/1.3667386
View articletitled, Closure to “Discussions of ‘On Determining the Hardness of Grinding Wheels—I’” (1962, ASME J. Eng. Ind., 84, pp. 126–128)
Open the PDF for in another window
Topics: Grinding wheels
Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
F. J. Bogardus
J. Eng. Ind. February 1962, 84(1): 132–133. doi: https://doi.org/10.1115/1.3667388
View articletitled, Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
Open the PDF for in another window
Topics: Stress concentration
Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
R. E. Peterson
J. Eng. Ind. February 1962, 84(1): 133. doi: https://doi.org/10.1115/1.3667389
View articletitled, Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
Open the PDF for in another window
Topics: Stress concentration
Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
Robert A. Thomson
J. Eng. Ind. February 1962, 84(1): 133–134. doi: https://doi.org/10.1115/1.3667390
View articletitled, Discussion: “The Superposition of Stress Concentration Factors” (Paul, Jr., Frank W., and Faucett, Thomas R., 1962, ASME J. Eng. Ind., 84, pp. 129–132)
Open the PDF for in another window
Topics: Stress concentration
Closure to “Discussions of ‘The Superposition of Stress Concentration Factors’” (1962, ASME J. Eng. Ind., 84, pp. 132–134)
Frank W. Paul, Jr., Thomas R. Faucett
J. Eng. Ind. February 1962, 84(1): 134. doi: https://doi.org/10.1115/1.3667391
View articletitled, Closure to “Discussions of ‘The Superposition of Stress Concentration Factors’” (1962, ASME J. Eng. Ind., 84, pp. 132–134)
Open the PDF for in another window
Topics: Stress concentration
Discussion: “On the Variety of Motions Generated by Mechanisms” (Freudenstein, Ferdinand, 1962, ASME J. Eng. Ind., 84, pp. 156–159)
O. Bottema
J. Eng. Ind. February 1962, 84(1): 159–160. doi: https://doi.org/10.1115/1.3667398
View articletitled, Discussion: “On the Variety of Motions Generated by Mechanisms” (Freudenstein, Ferdinand, 1962, ASME J. Eng. Ind., 84, pp. 156–159)
Open the PDF for in another window
Closure to “Discussion of ‘On the Variety of Motions Generated by Mechanisms’” (1962, ASME J. Eng. Ind., 84, pp. 159–160)
Ferdinand Freudenstein
J. Eng. Ind. February 1962, 84(1): 160. doi: https://doi.org/10.1115/1.3667400
View articletitled, Closure to “Discussion of ‘On the Variety of Motions Generated by Mechanisms’” (1962, ASME J. Eng. Ind., 84, pp. 159–160)
Open the PDF for in another window
Discussion: “Constant Diameter Cams, Their Properties and Design Characteristics” (Brunell, Karl, 1962, ASME J. Eng. Ind., 84, pp. 161–164)
George F. Kennison
J. Eng. Ind. February 1962, 84(1): 164. doi: https://doi.org/10.1115/1.3667403
View articletitled, Discussion: “Constant Diameter Cams, Their Properties and Design Characteristics” (Brunell, Karl, 1962, ASME J. Eng. Ind., 84, pp. 161–164)
Open the PDF for in another window
Topics: Cams , Design
Discussion: “Constant Diameter Cams, Their Properties and Design Characteristics” (Brunell, Karl, 1962, ASME J. Eng. Ind., 84, pp. 161–164)
Harold A. Rothbart
J. Eng. Ind. February 1962, 84(1): 164. doi: https://doi.org/10.1115/1.3667405
View articletitled, Discussion: “Constant Diameter Cams, Their Properties and Design Characteristics” (Brunell, Karl, 1962, ASME J. Eng. Ind., 84, pp. 161–164)
Open the PDF for in another window
Topics: Cams , Design
Closure to “Discussions of ‘Constant Diameter Cams, Their Properties and Design Characteristics’” (1962, ASME J. Eng. Ind., 84, p. 164)
Karl Brunell
J. Eng. Ind. February 1962, 84(1): 164. doi: https://doi.org/10.1115/1.3667406
View articletitled, Closure to “Discussions of ‘Constant Diameter Cams, Their Properties and Design Characteristics’” (1962, ASME J. Eng. Ind., 84, p. 164)
Open the PDF for in another window
Topics: Cams , Design
Discussion: “Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer” (Finkelstein, T., 1962, ASME J. Eng. Ind., 84, pp. 165–178)
Cesare Codegone
J. Eng. Ind. February 1962, 84(1): 178. doi: https://doi.org/10.1115/1.3667410
View articletitled, Discussion: “Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer” (Finkelstein, T., 1962, ASME J. Eng. Ind., 84, pp. 165–178)
Open the PDF for in another window
Topics: Computers , Machinery
Discussion: “Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer” (Finkelstein, T., 1962, ASME J. Eng. Ind., 84, pp. 165–178)
G. Walker, D. W. Kirkley
J. Eng. Ind. February 1962, 84(1): 178–179. doi: https://doi.org/10.1115/1.3667411
View articletitled, Discussion: “Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer” (Finkelstein, T., 1962, ASME J. Eng. Ind., 84, pp. 165–178)
Open the PDF for in another window
Topics: Computers , Machinery
Closure to “Discussions of ‘Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer’” (1962, ASME J. Eng. Ind., 84, pp. 178–179)
T. Finkelstein
J. Eng. Ind. February 1962, 84(1): 179. doi: https://doi.org/10.1115/1.3667413
View articletitled, Closure to “Discussions of ‘Cyclic Processes in Closed Regenerative Gas Machines Analyzed by a Digital Computer Simulating a Differential Analyzer’” (1962, ASME J. Eng. Ind., 84, pp. 178–179)
Open the PDF for in another window
Topics: Computers , Machinery
Discussion: “An Axial-Flow Porous Plug Apparatus” (King, R. C., and Potter, J. H., 1962, ASME J. Eng. Ind., 84, pp. 180–188)
Frederick G. Keyes
J. Eng. Ind. February 1962, 84(1): 188–190. doi: https://doi.org/10.1115/1.3667416
View articletitled, Discussion: “An Axial-Flow Porous Plug Apparatus” (King, R. C., and Potter, J. H., 1962, ASME J. Eng. Ind., 84, pp. 180–188)
Open the PDF for in another window
Topics: Axial flow
Discussion: “An Axial-Flow Porous Plug Apparatus” (King, R. C., and Potter, J. H., 1962, ASME J. Eng. Ind., 84, pp. 180–188)
B. H. Sage
J. Eng. Ind. February 1962, 84(1): 190. doi: https://doi.org/10.1115/1.3667417
View articletitled, Discussion: “An Axial-Flow Porous Plug Apparatus” (King, R. C., and Potter, J. H., 1962, ASME J. Eng. Ind., 84, pp. 180–188)
Open the PDF for in another window
Topics: Axial flow
Closure to “Discussions of ‘An Axial-Flow Porous Plug Apparatus’” (1962, ASME J. Eng. Ind., 84, pp. 188–190)
R. C. King, J. H. Potter
J. Eng. Ind. February 1962, 84(1): 190. doi: https://doi.org/10.1115/1.3667419
View articletitled, Closure to “Discussions of ‘An Axial-Flow Porous Plug Apparatus’” (1962, ASME J. Eng. Ind., 84, pp. 188–190)
Open the PDF for in another window
Topics: Axial flow
Discussion: “Tensions in Straight and Curvilinear Belt Conveyers” (Winkler, W. A., 1962, ASME J. Eng. Ind., 84, pp. 191–195)
Russel K. Albright
J. Eng. Ind. February 1962, 84(1): 195. doi: https://doi.org/10.1115/1.3667422
View articletitled, Discussion: “Tensions in Straight and Curvilinear Belt Conveyers” (Winkler, W. A., 1962, ASME J. Eng. Ind., 84, pp. 191–195)
Open the PDF for in another window
Topics: Belts
Discussion: “Tensions in Straight and Curvilinear Belt Conveyers” (Winkler, W. A., 1962, ASME J. Eng. Ind., 84, pp. 191–195)
A. H. Soderquist, Alexander Corsun
J. Eng. Ind. February 1962, 84(1): 195. doi: https://doi.org/10.1115/1.3667424
View articletitled, Discussion: “Tensions in Straight and Curvilinear Belt Conveyers” (Winkler, W. A., 1962, ASME J. Eng. Ind., 84, pp. 191–195)
Open the PDF for in another window
Topics: Belts
Closure to “Discussions of ‘Tensions in Straight and Curvilinear Belt Conveyers’” (1962, ASME J. Eng. Ind., 84, p. 195)
W. A. Winkler
J. Eng. Ind. February 1962, 84(1): 196. doi: https://doi.org/10.1115/1.3667425
View articletitled, Closure to “Discussions of ‘Tensions in Straight and Curvilinear Belt Conveyers’” (1962, ASME J. Eng. Ind., 84, p. 195)
Open the PDF for in another window
Topics: Belts
All Issues
ADDOPT: An Additive Manufacturing Optimal Control Framework Demonstrated in Minimizing Layer-Level Thermal Variance in Electron Beam Powder Bed Fusion
J. Manuf. Sci. Eng (April 2025)
A Differentiable Physics-Informed Machine Learning Approach to Model Laser-Based Micro-Manufacturing Process
J. Manuf. Sci. Eng (May 2025)
Additive Manufacturing of Wheat Straw Fibers for Sustainable Thermal Insulation Application
J. Manuf. Sci. Eng (May 2025)
Repurposing Supply Chains and Process Planning Across Products Using a Similarity Model Based on Supernetworks
J. Manuf. Sci. Eng (May 2025)
Flexible Tooling Enabled by the Electromagnetics With Discrete Blank Holding Force: Short-Time Pulse Control and Forming Validation
J. Manuf. Sci. Eng (May 2025)
  • Online ISSN 1528-8935
  • Print ISSN 1087-1357

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2025 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept