Volume 139 Issue 3 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 139, Issue 3

March 2017

ISSN 1087-1357

EISSN 1528-8935

Research Papers

Stress Field Analysis in Orthogonal Cutting Process Using Digital Image Correlation Technique

Dong Zhang, Xiao-Ming Zhang, Wen-Jie Xu, Han Ding

J. Manuf. Sci. Eng. March 2017, 139(3): 031001. doi: https://doi.org/10.1115/1.4033928

Abstract

View articletitled, Stress Field Analysis in Orthogonal Cutting Process Using Digital Image Correlation Technique

Open the PDF for in another window

Topics: Cutting , Deformation , Stress , Hydrostatic pressure , Shear (Mechanics)

On-The-Fly Laser Machining: A Case Study for In Situ Balancing of Rotative Parts

M. Stoesslein, D. Axinte, D. Gilbert

J. Manuf. Sci. Eng. March 2017, 139(3): 031002. doi: https://doi.org/10.1115/1.4034476

Abstract

View articletitled, On-The-Fly Laser Machining: A Case Study for In Situ Balancing of Rotative Parts

Open the PDF for in another window

Topics: Errors , Lasers , Machining

Residual Winding Stresses Due to Spatial Web Thickness Variation

J. K. Good, C. Mollamahmutoglu, R. Markum, J. W. Gale

J. Manuf. Sci. Eng. March 2017, 139(3): 031003. doi: https://doi.org/10.1115/1.4034593

Abstract

View articletitled, Residual Winding Stresses Due to Spatial Web Thickness Variation

Open the PDF for in another window

Topics: Stress , Winding (process) , Pressure

Shallow Angle Drilling of Inconel 718 Using a Helical Laser Drilling Technique

Joonghan Shin, Jyotirmoy Mazumder

J. Manuf. Sci. Eng. March 2017, 139(3): 031004. doi: https://doi.org/10.1115/1.4034718

Abstract

View articletitled, Shallow Angle Drilling of Inconel 718 Using a Helical Laser Drilling Technique

Open the PDF for in another window

Topics: Drilling , Lasers , Hole quality , Cycles

An Experimental, Analytical, and Numerical Investigation of Hydraulic Bulge Test in Two-Layer Al–Cu Sheets

F. A. Marandi, A. H. Jabbari, M. Sedighi, R. Hashemi

J. Manuf. Sci. Eng. March 2017, 139(3): 031005. doi: https://doi.org/10.1115/1.4034717

Abstract

View articletitled, An Experimental, Analytical, and Numerical Investigation of Hydraulic Bulge Test in Two-Layer Al–Cu Sheets

Open the PDF for in another window

Topics: Pressure , Stress , Finite element methods , Finite element model , Sheet metal work

Double-Direction Pressure Distributions Generated by Vaporizing Metal Foils

S. Cai

J. Manuf. Sci. Eng. March 2017, 139(3): 031006. doi: https://doi.org/10.1115/1.4034494

Abstract

View articletitled, Double-Direction Pressure Distributions Generated by Vaporizing Metal Foils

Open the PDF for in another window

Topics: Pressure , Metal foil , Shock (Mechanics)

Spontaneous Fabrication of Three-Dimensional Multiscale Fractal Structures Using Hele-Shaw Cell

Tanveer ul Islam, Prasanna S. Gandhi

J. Manuf. Sci. Eng. March 2017, 139(3): 031007. doi: https://doi.org/10.1115/1.4034624

Abstract

View articletitled, Spontaneous Fabrication of Three-Dimensional Multiscale Fractal Structures Using Hele-Shaw Cell

Open the PDF for in another window

Topics: Ceramics , Fluids , Fractals , Manufacturing , Plates (structures) , Shapes

Methodology to Improve the Cylindricity of Engine Cylinder Bore by Honing

Xueping Zhang, Xiaoqing Wang, Daming Wang, Zhenqiang Yao, Lifeng Xi, Xiaojuan Wang

J. Manuf. Sci. Eng. March 2017, 139(3): 031008. doi: https://doi.org/10.1115/1.4034622

Abstract

View articletitled, Methodology to Improve the Cylindricity of Engine Cylinder Bore by Honing

Open the PDF for in another window

Topics: Cylinders , Engine cylinders , Trajectories (Physics) , Optimization

Deep-Drawing Forming Trials on a Cross-Ply Thermoplastic Lamina for Helmet Preform Manufacture

Lisa M. Dangora, Cynthia J. Mitchell, James Sherwood, Jason C. Parker

J. Manuf. Sci. Eng. March 2017, 139(3): 031009. doi: https://doi.org/10.1115/1.4034791

Abstract

View articletitled, Deep-Drawing Forming Trials on a Cross-Ply Thermoplastic Lamina for Helmet Preform Manufacture

Open the PDF for in another window

Topics: Binders (Materials) , Fibers , Preforms , Pressure , Shapes , Geometry , Temperature , Manufacturing , Density , Shear (Mechanics)

Step Ring-Based Three-Dimensional Path Planning Via Graphics Processing Unit Simulation for Subtractive Three-Dimensional Printing

Zhengkai Wu, Thomas M. Tucker, Chandra Nath, Thomas R. Kurfess, Richard W. Vuduc

J. Manuf. Sci. Eng. March 2017, 139(3): 031010. doi: https://doi.org/10.1115/1.4034662

Abstract

View articletitled, Step Ring-Based Three-Dimensional Path Planning Via Graphics Processing Unit Simulation for Subtractive Three-Dimensional Printing

Open the PDF for in another window

Topics: Graphics processing units , Path planning , Simulation , Geometry , Computer software , Machining , Additive manufacturing

Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks

Hantang Qin, Yi Cai, Jingyan Dong, Yuan-Shin Lee

J. Manuf. Sci. Eng. March 2017, 139(3): 031011. doi: https://doi.org/10.1115/1.4034663

Abstract

View articletitled, Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks

Open the PDF for in another window

Topics: Capacitance , Electrodes , Manufacturing , Printing , Rapid prototyping , Sensors , Tactile sensors , Silver , Resolution (Optics)

Evaluating Rigid and Semiflexible Fiber Orientation Evolution Models in Simple Flows

Gregory M. Lambert, Donald G. Baird

J. Manuf. Sci. Eng. March 2017, 139(3): 031012. doi: https://doi.org/10.1115/1.4034664

Abstract

View articletitled, Evaluating Rigid and Semiflexible Fiber Orientation Evolution Models in Simple Flows

Open the PDF for in another window

Topics: Fibers , Flow (Dynamics) , Shear (Mechanics) , Composite materials , Stress

Improvement in Material Flow During Nonisothermal Warm Deep Drawing of Nonheat Treatable Aluminum Alloy Sheets

Sudhy S. Panicker, Sushanta Kumar Panda

J. Manuf. Sci. Eng. March 2017, 139(3): 031013. doi: https://doi.org/10.1115/1.4034594

Abstract

View articletitled, Improvement in Material Flow During Nonisothermal Warm Deep Drawing of Nonheat Treatable Aluminum Alloy Sheets

Open the PDF for in another window

Topics: Aluminum alloys , Anisotropy , Blanks , Cavities , Deformation , Finite element analysis , Finite element model , Flanges , Flow (Dynamics) , Temperature

Analysis on the Effects of Grinding Wheel Speed on Removal Behavior of Brittle Optical Materials

Ping Li, Tan Jin, Zongfu Guo, Jun Yi, Meina Qu

J. Manuf. Sci. Eng. March 2017, 139(3): 031014. doi: https://doi.org/10.1115/1.4034665

Abstract

View articletitled, Analysis on the Effects of Grinding Wheel Speed on Removal Behavior of Brittle Optical Materials

Open the PDF for in another window

Topics: Brittleness , Damage , Grinding , Wheels , Surface roughness , Optical materials , Finishing

Porous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method

Xuan Song, Zhuofeng Zhang, Zeyu Chen, Yong Chen

J. Manuf. Sci. Eng. March 2017, 139(3): 031015. doi: https://doi.org/10.1115/1.4034666

Abstract

View articletitled, Porous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method

Open the PDF for in another window

Topics: Manufacturing , Porosity , Resins , Stereolithography , Particulate matter , Additive manufacturing , Boiling , Blades

Parameter Study of Three-Dimensional Printing Graphene Oxide Based on Directional Freezing

Feng Zhang, Feng Yang, Dong Lin, Chi Zhou

J. Manuf. Sci. Eng. March 2017, 139(3): 031016. doi: https://doi.org/10.1115/1.4034669

Abstract

View articletitled, Parameter Study of Three-Dimensional Printing Graphene Oxide Based on Directional Freezing

Open the PDF for in another window

Topics: Additive manufacturing , Cycles , Freezing , Graphene , Inks , Nozzles , Pressure , Printing , Nanomaterials

Distortions and Residual Stresses at Layer-by-Layer Additive Manufacturing by Fusion

V. A. Safronov, R. S. Khmyrov, D. V. Kotoban, A. V. Gusarov

J. Manuf. Sci. Eng. March 2017, 139(3): 031017. doi: https://doi.org/10.1115/1.4034714

Abstract

View articletitled, Distortions and Residual Stresses at Layer-by-Layer Additive Manufacturing by Fusion

Open the PDF for in another window

Topics: Additive manufacturing , Deformation , Residual stresses , Stress , Temperature , Tension , Uncertainty , Shrinkage (Materials) , Modeling

Modeling of an Electropolishing-Assisted Electroless Deposition Process for Microcellular Metal Foam Fabrication

Wei Jiang, Russell Borduin, Hao Xin, Wei Li

J. Manuf. Sci. Eng. March 2017, 139(3): 031018. doi: https://doi.org/10.1115/1.4035215

Abstract

View articletitled, Modeling of an Electropolishing-Assisted Electroless Deposition Process for Microcellular Metal Foam Fabrication

Open the PDF for in another window

Topics: Diffusion (Physics) , Electrolytic polishing , Manufacturing , Metal foams , Modeling , Polishing , Porosity , Polymers , Metals

Ultrasonic Welding of Magnesium–Titanium Dissimilar Metals: A Study on Influences of Welding Parameters on Mechanical Property by Experimentation and Artificial Neural Network

Dewang Zhao, Kunmin Zhao, Daxin Ren, Xinglin Guo

J. Manuf. Sci. Eng. March 2017, 139(3): 031019. doi: https://doi.org/10.1115/1.4035539

Abstract

View articletitled, Ultrasonic Welding of Magnesium–Titanium Dissimilar Metals: A Study on Influences of Welding Parameters on Mechanical Property by Experimentation and Artificial Neural Network

Open the PDF for in another window

Topics: Artificial neural networks , Magnesium (Metal) , Titanium , Ultrasonic welding , Vibration , Welding , Mechanical properties , Metals

Quantitative Comparison of Pocket Geometry and Pocket Decomposition to Obtain Improved Spiral Tool Path: A Novel Approach

Divyangkumar D. Patel, Devdas I. Lalwani

J. Manuf. Sci. Eng. March 2017, 139(3): 031020. doi: https://doi.org/10.1115/1.4034896

Abstract

View articletitled, Quantitative Comparison of Pocket Geometry and Pocket Decomposition to Obtain Improved Spiral Tool Path: A Novel Approach

Open the PDF for in another window

Topics: Dimensionless numbers , Geometry , Machining

Technical Brief

Joining Dissimilar Materials Using Friction Stir Scribe Technique

Piyush Upadhyay, Yuri Hovanski, Saumyadeep Jana, Leonard S. Fifield

J. Manuf. Sci. Eng. March 2017, 139(3): 034501. doi: https://doi.org/10.1115/1.4034629

Abstract

View articletitled, Joining Dissimilar Materials Using Friction Stir Scribe Technique

Open the PDF for in another window

Topics: Aluminum , Friction , Joining , Steel , Welding , Polymers , Design

Influence of Continuous Direct Current on the Microtube Hydroforming Process

Scott W. Wagner, Kenny Ng, William J. Emblom, Jaime A. Camelio

J. Manuf. Sci. Eng. March 2017, 139(3): 034502. doi: https://doi.org/10.1115/1.4034790

Abstract

View articletitled, Influence of Continuous Direct Current on the Microtube Hydroforming Process

Open the PDF for in another window

Topics: Current density , Currents , Deformation , Ductility , Electric arc furnaces , Electric current , Flow (Dynamics) , Heating , Manufacturing , Metals

Expert View

Industry 4.0 and Cloud Manufacturing: A Comparative Analysis

Yongkui Liu, Xun Xu

J. Manuf. Sci. Eng. March 2017, 139(3): 034701. doi: https://doi.org/10.1115/1.4034667

Abstract

View articletitled, Industry 4.0 and Cloud Manufacturing: A Comparative Analysis

Open the PDF for in another window

Topics: Manufacturing

Research Papers

Stress Field Analysis in Orthogonal Cutting Process Using Digital Image Correlation Technique

On-The-Fly Laser Machining: A Case Study for In Situ Balancing of Rotative Parts

Residual Winding Stresses Due to Spatial Web Thickness Variation

Shallow Angle Drilling of Inconel 718 Using a Helical Laser Drilling Technique

An Experimental, Analytical, and Numerical Investigation of Hydraulic Bulge Test in Two-Layer Al–Cu Sheets

Double-Direction Pressure Distributions Generated by Vaporizing Metal Foils

Spontaneous Fabrication of Three-Dimensional Multiscale Fractal Structures Using Hele-Shaw Cell

Methodology to Improve the Cylindricity of Engine Cylinder Bore by Honing

Deep-Drawing Forming Trials on a Cross-Ply Thermoplastic Lamina for Helmet Preform Manufacture

Step Ring-Based Three-Dimensional Path Planning Via Graphics Processing Unit Simulation for Subtractive Three-Dimensional Printing

Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks

Evaluating Rigid and Semiflexible Fiber Orientation Evolution Models in Simple Flows

Improvement in Material Flow During Nonisothermal Warm Deep Drawing of Nonheat Treatable Aluminum Alloy Sheets

Analysis on the Effects of Grinding Wheel Speed on Removal Behavior of Brittle Optical Materials

Porous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method

Parameter Study of Three-Dimensional Printing Graphene Oxide Based on Directional Freezing

Distortions and Residual Stresses at Layer-by-Layer Additive Manufacturing by Fusion

Modeling of an Electropolishing-Assisted Electroless Deposition Process for Microcellular Metal Foam Fabrication

Ultrasonic Welding of Magnesium–Titanium Dissimilar Metals: A Study on Influences of Welding Parameters on Mechanical Property by Experimentation and Artificial Neural Network

Quantitative Comparison of Pocket Geometry and Pocket Decomposition to Obtain Improved Spiral Tool Path: A Novel Approach

Technical Brief

Joining Dissimilar Materials Using Friction Stir Scribe Technique

Influence of Continuous Direct Current on the Microtube Hydroforming Process

Expert View

Industry 4.0 and Cloud Manufacturing: A Comparative Analysis

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Brief

Expert View

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only