Topics: Dynamic models , Dynamic response , Friction , Modeling , Rotation , Steady state , Welding , Dynamic modeling , Finite element analysis , Feedback

Examination of Selective Pulsed Laser Micropolishing on Microfabricated Nickel Samples Using Spatial Frequency Analysis

Tyler L. Perry, Dirk Werschmoeller, Neil A. Duffie, Xiaochun Li, Frank E. Pfefferkorn

J. Manuf. Sci. Eng. April 2009, 131(2): 021002. doi: https://doi.org/10.1115/1.3075874

Abstract

View articletitled, Examination of Selective Pulsed Laser Micropolishing on Microfabricated Nickel Samples Using Spatial Frequency Analysis

Open the PDF for in another window

Topics: Lasers , Nickel , Polishing , Surface roughness , Melting , Ablation (Vaporization technology)

Endmill Condition Monitoring and Failure Forecasting Method for Curvilinear Cuts of Nonconstant Radii

Christopher A. Suprock, John T. Roth, Larry M. Downey

J. Manuf. Sci. Eng. April 2009, 131(2): 021003. doi: https://doi.org/10.1115/1.3075895

Abstract

View articletitled, Endmill Condition Monitoring and Failure Forecasting Method for Curvilinear Cuts of Nonconstant Radii

Open the PDF for in another window

Topics: Algorithms , Condition monitoring , Cutting , Failure , Life testing , Wear , Wear testing

The Realization of Low Stress and Nonangular Distortion by Double-Sided Double Arc Welding

Hua-Jun Zhang, Guang-Jun Zhang, Chun-Bo Cai, Hong-Ming Gao, Lin Wu

J. Manuf. Sci. Eng. April 2009, 131(2): 021004. doi: https://doi.org/10.1115/1.3070512

Abstract

View articletitled, The Realization of Low Stress and Nonangular Distortion by Double-Sided Double Arc Welding

Open the PDF for in another window

Topics: Arc welding , Stress , Temperature , Computer simulation

Numerical Analysis of Ultrashort Pulse Laser-Material Interaction Using ABAQUS

Dongkyun Lee, Elijah Kannatey-Asibu, Jr.

J. Manuf. Sci. Eng. April 2009, 131(2): 021005. doi: https://doi.org/10.1115/1.3075869

Abstract

View articletitled, Numerical Analysis of Ultrashort Pulse Laser-Material Interaction Using <span class="small-caps">ABAQUS</span>

Open the PDF for in another window

Topics: Ablation (Vaporization technology) , Finite element methods , Fluence (Radiation measurement) , Lasers , Temperature , Electrons

Dynamic Optimization of the Grinding Process in Batch Production

Cheol W. Lee

J. Manuf. Sci. Eng. April 2009, 131(2): 021006. doi: https://doi.org/10.1115/1.3090880

Abstract

View articletitled, Dynamic Optimization of the Grinding Process in Batch Production

Open the PDF for in another window

Topics: Cycles , Dynamic programming , Grinding , Optimization , Wheels , Algorithms

The Determination of Heating Shapes and Locations for Triangle Heating

Young-Bum Kim, Jung-Seo Park, Jong-Gye Shin, Chung-Min Hyun, Kwang-Hee Ko

J. Manuf. Sci. Eng. April 2009, 131(2): 021007. doi: https://doi.org/10.1115/1.3090886

Abstract

View articletitled, The Determination of Heating Shapes and Locations for Triangle Heating

Open the PDF for in another window

Topics: Heating , Shapes , Deformation

Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming

Gracious Ngaile, Chen Yang

J. Manuf. Sci. Eng. April 2009, 131(2): 021008. doi: https://doi.org/10.1115/1.3090888

Abstract

View articletitled, Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming

Open the PDF for in another window

Topics: Friction , Pressure , Stress , Finite element analysis

Modeling and Analysis of an Active Reconfigurable Fixturing Device Using a Bed of Pins Lowered on a Moving Platen

Daniel Walczyk, Chris Munro

J. Manuf. Sci. Eng. April 2009, 131(2): 021009. doi: https://doi.org/10.1115/1.3090882

Abstract

View articletitled, Modeling and Analysis of an Active Reconfigurable Fixturing Device Using a Bed of Pins Lowered on a Moving Platen

Open the PDF for in another window

Topics: Solenoids , Pins (Engineering)

The Effects of Wetting and Surface Roughness on Liquid Metal Droplet Bouncing

Wen-Kai Hsiao, Jung-Hoon Chun, Nannaji Saka

J. Manuf. Sci. Eng. April 2009, 131(2): 021010. doi: https://doi.org/10.1115/1.3090884

Abstract

View articletitled, The Effects of Wetting and Surface Roughness on Liquid Metal Droplet Bouncing

Open the PDF for in another window

Topics: Drops , Liquid metals , Surface roughness , Wetting , Solders , Rapid prototyping , Tin

Technical Briefs

Modeling of Melting, Evaporating, and Resolidifying Procedure in Laser-Induced Metal Processing

Seungwon Shin, Haseung Chung

J. Manuf. Sci. Eng. April 2009, 131(2): 024501. doi: https://doi.org/10.1115/1.3063654

Abstract

View articletitled, Modeling of Melting, Evaporating, and Resolidifying Procedure in Laser-Induced Metal Processing

Open the PDF for in another window

Topics: Evaporation , Lasers , Melting , Metals , Temperature , Heat flux , Scaling laws (Mathematical physics) , Boundary-value problems , Modeling

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effects of chitosan addition on mechanical, surface, and antibacterial properties of 3D printed photopolymers

J. Manuf. Sci. Eng

Effect of Process Parameters on Texture in Quasi-Isotropic IN718 Processed by Laser Powder Bed Fusion

J. Manuf. Sci. Eng (July 2025)

Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in Single Point Incremental Forming

J. Manuf. Sci. Eng

Characterization of adhesion in lithium-ion battery electrodes with laser-textured current collectors

J. Manuf. Sci. Eng

Experimental Study on Force and Surface Morphology of Additive Manufacturing FeCoNiCrAl_0.5 High Entropy Alloy

J. Manuf. Sci. Eng (July 2025)

Research Papers

Empirical Dynamic Modeling of Friction Stir Welding Processes

Examination of Selective Pulsed Laser Micropolishing on Microfabricated Nickel Samples Using Spatial Frequency Analysis

Endmill Condition Monitoring and Failure Forecasting Method for Curvilinear Cuts of Nonconstant Radii

The Realization of Low Stress and Nonangular Distortion by Double-Sided Double Arc Welding

Numerical Analysis of Ultrashort Pulse Laser-Material Interaction Using ABAQUS

Dynamic Optimization of the Grinding Process in Batch Production

The Determination of Heating Shapes and Locations for Triangle Heating

Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming

Modeling and Analysis of an Active Reconfigurable Fixturing Device Using a Bed of Pins Lowered on a Moving Platen

The Effects of Wetting and Surface Roughness on Liquid Metal Droplet Bouncing

Technical Briefs

Modeling of Melting, Evaporating, and Resolidifying Procedure in Laser-Induced Metal Processing

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only