Volume 130 Issue 2 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 130, Issue 2

April 2008

ISSN 1087-1357

EISSN 1528-8935

Preface

Albert J. Shih, Dong-Woo Cho

J. Manuf. Sci. Eng. April 2008, 130(2): 020601. doi: https://doi.org/10.1115/1.2901080

Extract

View articletitled, Preface

Open the PDF for in another window

Topics: Biomedicine , Manufacturing , Health care

Research Papers

Electrostatic Spray Deposition of Nanostructured Hydroxyapatite Coating for Biomedical Applications

Wenping Jiang, Li Sun, Gilbert Nyandoto, Ajay P. Malshe

J. Manuf. Sci. Eng. April 2008, 130(2): 021001. doi: https://doi.org/10.1115/1.2816016

Abstract

View articletitled, Electrostatic Spray Deposition of Nanostructured Hydroxyapatite Coating for Biomedical Applications

Open the PDF for in another window

Topics: Coating processes , Coatings , Lasers , Particulate matter , Preforms , Sintering , Sprays

Experimental Investigations of Laser Micromachining of Nickel Using Thin Film Micro Thermocouples

Hongseok Choi, Xiaochun Li

J. Manuf. Sci. Eng. April 2008, 130(2): 021002. doi: https://doi.org/10.1115/1.2816021

Abstract

View articletitled, Experimental Investigations of Laser Micromachining of Nickel Using Thin Film Micro Thermocouples

Open the PDF for in another window

Topics: Lasers , Micromachining , Nickel , Thermocouples , Thin films , Temperature

Modeling of the Flow Rate in the Dispensing-Based Process for Fabricating Tissue Scaffolds

X. B. Chen, M. G. Li, H. Ke

J. Manuf. Sci. Eng. April 2008, 130(2): 021003. doi: https://doi.org/10.1115/1.2789725

Abstract

View articletitled, Modeling of the Flow Rate in the Dispensing-Based Process for Fabricating Tissue Scaffolds

Open the PDF for in another window

Topics: Biomaterials , Flow (Dynamics) , Manufacturing , Needles , Temperature , Modeling , Tissue scaffolds , Engineering simulation , Simulation , Pressure

Selective Ultrasonic Foaming of Polymer for Biomedical Applications

Hai Wang, Wei Li

J. Manuf. Sci. Eng. April 2008, 130(2): 021004. doi: https://doi.org/10.1115/1.2823078

Abstract

View articletitled, Selective Ultrasonic Foaming of Polymer for Biomedical Applications

Open the PDF for in another window

Topics: Biomedicine , Diffusion (Physics) , Polymers , Ultrasound , Ultrasonic effects

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Li-Hsin Han, Gazell Mapili, Shaochen Chen, Krishnendu Roy

J. Manuf. Sci. Eng. April 2008, 130(2): 021005. doi: https://doi.org/10.1115/1.2823079

Abstract

View articletitled, Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Open the PDF for in another window

Topics: Manufacturing , Printing , Resolution (Optics) , Stem cells , Tissue engineering , Tissue scaffolds , Ultraviolet radiation , Hardening (Curing) , Microfabrication , Photomasks

Designed PCL Nanofibers Fabricated Using a Modified Electrohydrodynamic Process for Tissue Engineering

GeunHyung Kim, WanDoo Kim

J. Manuf. Sci. Eng. April 2008, 130(2): 021006. doi: https://doi.org/10.1115/1.2896108

Abstract

View articletitled, Designed PCL Nanofibers Fabricated Using a Modified Electrohydrodynamic Process for Tissue Engineering

Open the PDF for in another window

Topics: Electrodes , Electrohydrodynamics , Electrospinning , Fibers , Nanofibers , Tissue engineering , Nozzles , Mechanical properties , Electric fields

Development of Three-Dimensional Alginate Encapsulated Chondrocyte Hybrid Scaffold Using Microstereolithography

Seung-Jae Lee, Jong-Won Rhie, Dong-Woo Cho

J. Manuf. Sci. Eng. April 2008, 130(2): 021007. doi: https://doi.org/10.1115/1.2896114

Abstract

View articletitled, Development of Three-Dimensional Alginate Encapsulated Chondrocyte Hybrid Scaffold Using Microstereolithography

Open the PDF for in another window

Topics: Cartilage , Chondrocytes , Design , Lasers , Manufacturing , Biomimetics , Polymerization , Rapid prototyping , Hydrogels , Photopolymers

Low Plasticity Burnishing: An Innovative Manufacturing Method for Biomedical Applications

C. Y. Seemikeri, P. K. Brahmankar, S. B. Mahagaonkar

J. Manuf. Sci. Eng. April 2008, 130(2): 021008. doi: https://doi.org/10.1115/1.2896121

Abstract

View articletitled, Low Plasticity Burnishing: An Innovative Manufacturing Method for Biomedical Applications

Open the PDF for in another window

Topics: Fatigue life , Plasticity , Surface roughness , Finishes , Microhardness , Biomedicine , Experimental design , Manufacturing , Compression

Biomedical Manufacturing: A New Frontier of Manufacturing Research

Albert J. Shih

J. Manuf. Sci. Eng. April 2008, 130(2): 021009. doi: https://doi.org/10.1115/1.2896116

Abstract

View articletitled, Biomedical Manufacturing: A New Frontier of Manufacturing Research

Open the PDF for in another window

Topics: Biomedicine , Manufacturing

Replication Quality of Flow-Through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding

Bong-Kee Lee, Chul Jin Hwang, Dong Sung Kim, Tai Hun Kwon

J. Manuf. Sci. Eng. April 2008, 130(2): 021010. doi: https://doi.org/10.1115/1.2896142

Abstract

View articletitled, Replication Quality of Flow-Through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding

Open the PDF for in another window

Topics: Flow (Dynamics) , Microfluidics , Molding , Packing (Shipments) , Packings (Cushioning) , Temperature , Pressure , Solid models , Blood

Formation of Highly Aligned Grooves on Inner Surface of Semipermeable Hollow Fiber Membrane for Directional Axonal Outgrowth

Yu Long, Ning Zhang, Yong Huang, Xuejun Wen

J. Manuf. Sci. Eng. April 2008, 130(2): 021011. doi: https://doi.org/10.1115/1.2896111

Abstract

View articletitled, Formation of Highly Aligned Grooves on Inner Surface of Semipermeable Hollow Fiber Membrane for Directional Axonal Outgrowth

Open the PDF for in another window

Topics: Coagulants (Materials) , Fibers , Flow (Dynamics) , Membranes , Phase diagrams , Polymer solutions , Polymers , Texture (Materials) , Water , Manufacturing

Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method

Wei Wang, Yong Huang, Mica Grujicic, Douglas B. Chrisey

J. Manuf. Sci. Eng. April 2008, 130(2): 021012. doi: https://doi.org/10.1115/1.2896118

Abstract

View articletitled, Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method

Open the PDF for in another window

Topics: Coating processes , Coatings , Drops , Hydrogels , Particulate matter , Shear (Mechanics) , Stress , Damage

Characterization of Cell Constructs Generated With Inkjet Printing Technology Using In Vivo Magnetic Resonance Imaging

Tao Xu, John Olson, Weixin Zhao, Anthony Atala, Jian-Ming Zhu, James J. Yoo

J. Manuf. Sci. Eng. April 2008, 130(2): 021013. doi: https://doi.org/10.1115/1.2902857

Abstract

View articletitled, Characterization of Cell Constructs Generated With Inkjet Printing Technology Using <em>In Vivo</em> Magnetic Resonance Imaging

Open the PDF for in another window

Topics: Biological tissues , Magnetic resonance imaging , Printing , Imaging

Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips

Jie Cheng, Feng Lin, Haixia Liu, Yongnian Yan, Xiaohong Wang, Renji Zhang, Zhuo Xiong

J. Manuf. Sci. Eng. April 2008, 130(2): 021014. doi: https://doi.org/10.1115/1.2896215

Abstract

View articletitled, Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips

Open the PDF for in another window

Topics: Composite materials , Extruding , Hydrogels , Rheology , Flow (Dynamics) , Pressure , Manufacturing

Thermal-Electric Finite Element Analysis and Experimental Validation of Bipolar Electrosurgical Cautery

Robert E. Dodde, Scott F. Miller, James D. Geiger, Albert J. Shih

J. Manuf. Sci. Eng. April 2008, 130(2): 021015. doi: https://doi.org/10.1115/1.2902858

Abstract

View articletitled, Thermal-Electric Finite Element Analysis and Experimental Validation of Bipolar Electrosurgical Cautery

Open the PDF for in another window

Topics: Biological tissues , Compression , Electrical conductivity , Electrodes , Finite element analysis , Finite element methods , Finite element model , Temperature , Temperature distribution , Thermal conductivity

Fabrication of Cell-Encapsulated Alginate Microfiber Scaffold Using Microfluidic Channel

Byung Kim, MS, Intae Kim, MS, WooSeok Choi, BS, Sung Won Kim, M.D., Ph.D., JooSung Kim, M.D., Ph.D., Geunbae Lim, Ph.D.

J. Manuf. Sci. Eng. April 2008, 130(2): 021016. doi: https://doi.org/10.1115/1.2898576

Abstract

View articletitled, Fabrication of Cell-Encapsulated Alginate Microfiber Scaffold Using Microfluidic Channel

Open the PDF for in another window

Topics: Manufacturing , Microfluidics , Polyester fibers , Chondrocytes

High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology

Tao Xu, Helen Kincaid, Anthony Atala, James J. Yoo

J. Manuf. Sci. Eng. April 2008, 130(2): 021017. doi: https://doi.org/10.1115/1.2903064

Abstract

View articletitled, High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology

Open the PDF for in another window

Topics: Microparticles , Printing , Particulate matter

Solid Freeform Fabrication of Polycaprolactone∕Hydroxyapatite Tissue Scaffolds

L. Shor, S. Güçeri, M. Gandhi, X. Wen, W. Sun, Ph.D.

J. Manuf. Sci. Eng. April 2008, 130(2): 021018. doi: https://doi.org/10.1115/1.2898411

Abstract

View articletitled, Solid Freeform Fabrication of Polycaprolactone∕Hydroxyapatite Tissue Scaffolds

Open the PDF for in another window

Topics: Bone , Composite materials , Manufacturing , Mechanical properties , Osteoblasts , Porosity , Scanning electron microscopy , Stereolithography , Tissue scaffolds , Tissue engineering

Technical Briefs

The Influence of Process Variation on a Cortical Bone Interference Fit Pin Connection

Nathan A. Mauntler, Tony L. Schmitz, John C. Ziegert

J. Manuf. Sci. Eng. April 2008, 130(2): 024501. doi: https://doi.org/10.1115/1.2896103

Abstract

View articletitled, The Influence of Process Variation on a Cortical Bone Interference Fit Pin Connection

Open the PDF for in another window

Topics: Bone , Finite element analysis , Manufacturing , Press fits , Simulation , Stress , Failure , Fracture (Materials) , Drying , Pins (Engineering)

The Use of Stereolithography in Alveolar Reconstruction With Mandibular Block Bone Grafts

S. L. Campanelli, L. A. C. De Filippis, A. D. Ludovico, A. Falco, S. Tetè

J. Manuf. Sci. Eng. April 2008, 130(2): 024502. doi: https://doi.org/10.1115/1.2899640

Abstract

View articletitled, The Use of Stereolithography in Alveolar Reconstruction With Mandibular Block Bone Grafts

Open the PDF for in another window

Topics: Bone , Design , Stereolithography , Surgery

A Feasibility Study of LENS^® Deposition of CoCrMo Coating on a Titanium Substrate

G. D. Janaki Ram, B. E. Stucker

J. Manuf. Sci. Eng. April 2008, 130(2): 024503. doi: https://doi.org/10.1115/1.2898573

Abstract

View articletitled, A Feasibility Study of LENS<sup>®</sup> Deposition of CoCrMo Coating on a Titanium Substrate

Open the PDF for in another window

Topics: Coatings , Lenses (Optics) , Coating processes , Fracture (Process) , Titanium , Lasers

Preface

Preface

Research Papers

Electrostatic Spray Deposition of Nanostructured Hydroxyapatite Coating for Biomedical Applications

Experimental Investigations of Laser Micromachining of Nickel Using Thin Film Micro Thermocouples

Modeling of the Flow Rate in the Dispensing-Based Process for Fabricating Tissue Scaffolds

Selective Ultrasonic Foaming of Polymer for Biomedical Applications

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Designed PCL Nanofibers Fabricated Using a Modified Electrohydrodynamic Process for Tissue Engineering

Development of Three-Dimensional Alginate Encapsulated Chondrocyte Hybrid Scaffold Using Microstereolithography

Low Plasticity Burnishing: An Innovative Manufacturing Method for Biomedical Applications

Biomedical Manufacturing: A New Frontier of Manufacturing Research

Replication Quality of Flow-Through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding

Formation of Highly Aligned Grooves on Inner Surface of Semipermeable Hollow Fiber Membrane for Directional Axonal Outgrowth

Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method

Characterization of Cell Constructs Generated With Inkjet Printing Technology Using In Vivo Magnetic Resonance Imaging

Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips

Thermal-Electric Finite Element Analysis and Experimental Validation of Bipolar Electrosurgical Cautery

Fabrication of Cell-Encapsulated Alginate Microfiber Scaffold Using Microfluidic Channel

High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology

Solid Freeform Fabrication of Polycaprolactone∕Hydroxyapatite Tissue Scaffolds

Technical Briefs

The Influence of Process Variation on a Cortical Bone Interference Fit Pin Connection

The Use of Stereolithography in Alveolar Reconstruction With Mandibular Block Bone Grafts

A Feasibility Study of LENS^® Deposition of CoCrMo Coating on a Titanium Substrate

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Preface

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only