Skip Nav Destination
Issues
May 1987
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
Selection of Grinding Wheels for the Snagging of Steels and Cast Iron
J. Eng. Ind. May 1987, 109(2): 69–75.
doi: https://doi.org/10.1115/1.3187110
Topics:
Cast iron
,
Grinding wheels
,
Steel
,
Wheels
,
Grinding
,
Bearing steel
,
Grinding equipment
,
Machining
,
Pressure
,
Silicon
Comparison of Grinding and Lapping of Ferrites and Metals
J. Eng. Ind. May 1987, 109(2): 76–82.
doi: https://doi.org/10.1115/1.3187111
Topics:
Ferrites (Magnetic materials)
,
Grinding
,
Metals
,
Stress
,
Steel
,
Diamonds
,
Mechanical finishes (Metals)
,
Residual stresses
,
Storage
Morphology of Ground and Lapped Surfaces of Ferrite and Metal
J. Eng. Ind. May 1987, 109(2): 83–86.
doi: https://doi.org/10.1115/1.3187112
Topics:
Ferrites (Magnetic materials)
,
Metals
,
Grinding
,
Ceramics
,
Etching
,
Scanning electron microscopes
,
Steel
,
Stress
On Tool Materials for High Speed Machining
J. Eng. Ind. May 1987, 109(2): 87–91.
doi: https://doi.org/10.1115/1.3187113
Topics:
High speed machining
,
Machining
,
Tooling
,
Cycles
,
Wear
Acoustic Emission from the Face Milling Process—the Effects of Process Variables
J. Eng. Ind. May 1987, 109(2): 92–99.
doi: https://doi.org/10.1115/1.3187114
Topics:
Acoustic emissions
,
Milling
,
Cutting
,
Signals
,
Milling machines
,
Steel
A Consideration of Surface Roughness Measurement by Optical Method
J. Eng. Ind. May 1987, 109(2): 100–105.
doi: https://doi.org/10.1115/1.3187097
Topics:
Surface roughness
,
Reflection
,
Computer simulation
,
Simulation results
Surface Roughness Measurement Using Scanning Electron Microscope with Digital Processing
J. Eng. Ind. May 1987, 109(2): 106–111.
doi: https://doi.org/10.1115/1.3187098
A New Tolerance Analysis Method for Designers and Manufacturers
J. Eng. Ind. May 1987, 109(2): 112–116.
doi: https://doi.org/10.1115/1.3187099
Topics:
Tolerance analysis
,
Manufacturing
Verification of On-Line Computer Control of EDM by Data Dependent Systems
J. Eng. Ind. May 1987, 109(2): 117–121.
doi: https://doi.org/10.1115/1.3187100
Topics:
Computer control
,
Electrical discharge machining
,
Machining
,
Wear
,
Finishing
,
Grinding
,
Machinery
,
Noise (Sound)
,
Signals
,
Surface roughness
Torque Sensor For Direct-Drive Manipulators
J. Eng. Ind. May 1987, 109(2): 122–127.
doi: https://doi.org/10.1115/1.3187101
Topics:
Manipulators
,
Sensors
,
Torque
,
Design
,
Semiconductors (Materials)
,
Strain gages
,
Calibration
,
Impulse (Physics)
,
Stiffness
An Integrated CAD/CAPP System with “Know-hows” on Machining Accuracies of Parts
J. Eng. Ind. May 1987, 109(2): 128–133.
doi: https://doi.org/10.1115/1.3187102
Topics:
Computer-aided design
,
Machining
,
Machine tools
,
Engineering prototypes
,
Modeling
,
Surface roughness
Finite-Element Analysis of Flexible Fixturing System
J. Eng. Ind. May 1987, 109(2): 134–139.
doi: https://doi.org/10.1115/1.3187103
Topics:
Finite element analysis
,
Fixturing
,
Computer software
,
Design
,
Boundary-value problems
,
Computers
,
Coulomb's law
,
Deformation
,
Friction
,
Machining
The Influence of Lateral Wall Vibrations on the Ultrasonic Welding of Thin-Walled Parts
J. Eng. Ind. May 1987, 109(2): 140–147.
doi: https://doi.org/10.1115/1.3187104
Topics:
Ultrasonic welding
,
Vibration
,
Bond strength
,
Finite element analysis
,
Free vibrations
,
Welding
Analysis of Hydrostatic Bulging of Anisotropic Rectangular Diaphragms by the Rigid-Plastic Finite Element Method
J. Eng. Ind. May 1987, 109(2): 148–154.
doi: https://doi.org/10.1115/1.3187105
An Analysis of Three-Dimensional Upset Forging of Regular Polygonal Blocks by Using the Upper-Bound Method
J. Eng. Ind. May 1987, 109(2): 155–160.
doi: https://doi.org/10.1115/1.3187106
Topics:
Forging
,
Stress
,
Deformation
,
Copper
,
Energy consumption
,
Lubrication
,
Shapes
,
Temperature
A New Formulation of Generalized Velocity Field for Axisymmetric Forward Extrusion Through Arbitrarily Curved Dies
J. Eng. Ind. May 1987, 109(2): 161–168.
doi: https://doi.org/10.1115/1.3187107
Topics:
Extruding
,
Pressure
,
Computation
,
Finite element methods
,
Intermediate steel products
,
Polynomials
,
Stress
,
Temperature
,
Work hardening
Technical Briefs
Contact Rigidity at Tool Shank of Turning Tools
J. Eng. Ind. May 1987, 109(2): 169–172.
doi: https://doi.org/10.1115/1.3187108
Topics:
Stiffness
,
Turning
,
Vickers hardness testing
Analysis of the GMAW Process for Microprocessor Control of Arc Length
J. Eng. Ind. May 1987, 109(2): 172–176.
doi: https://doi.org/10.1115/1.3187109
Topics:
Gas metal arc welding
,
Engines
,
Motors
,
Arc welding
,
Dynamics (Mechanics)
,
Melting
,
Signals
,
Welding
,
Wire
Email alerts
RSS Feeds
2024 Reviewers
J. Manuf. Sci. Eng
In-Situ Monitoring and Its Correlation to Mechanical Properties in Additively Manufactured 718 Ni Alloy
J. Manuf. Sci. Eng (March 2025)
NoodlePrint: Cooperative Multi-Robot Additive Manufacturing With Helically Interlocked Tiles
J. Manuf. Sci. Eng (June 2025)