...Saeid Vafaei; Dongsheng Wen This work investigates subcooled flow boiling of aqueous based alumina nanofluids in 510 μ m single microchannels with a focus on the effect of nanoparticles on the critical heat flux. The surface temperature distribution along the pipe, the inlet and outlet pressures...

.... , Sparrow , E. M. , and Tong , J. C. K. , 2009 , “ Heat Transfer in All Pipe Flow Regimes: Laminar, Transitional/Intermittent, and Turbulent ,” Int. J. Heat Mass Transfer 0017-9310 , 52 , pp. 557 – 563 . 10.1016/j.ijheatmasstransfer.2008.07.009 Schmidt , T. E. , 1949 , “ Heat...

...Akihiko Horibe; Syahrul Husain; Hideo Inaba; Naoto Haruki; Ping Tu An experimental investigation of a fluidized bed with multiple cooling pipes was conducted to study adsorption characteristics of a new organic sorbent desiccant material (HU300P) for a new air conditioning system. The mass ratio...

... number are reported. 28 01 2007 19 09 2007 23 04 2008 heat exchangers heat transfer mass transfer pipes sublimation vortices heat transfer enhancement vortex generator finned flat tube bank heat exchanger The finned flat tube bank fin heat exchangers have many...

... mixtures organic compounds pipes flow boiling R134a propane mixture The reduction in chlorofluorocarbon (CFC) and hydrochlorofluorocarbon (HCFC) production and the scheduled phaseout of these ozone depleting refrigerants prompted the development and characterization of new...

... conditions. 16 06 2006 22 06 2007 06 03 2008 boiling evaporation heat transfer pipe flow pipes refrigeration two-phase flow ammonia in-tube boiling two-phase flow boiling correlations heat transfer coefficient liquid overfeed refrigeration systems The use...

... and thermophysical parameters. It can also be highlighted that the optimum FQCT and FCAT can transfer heat at a higher rate in comparison with the annular disk fin when a space constraint exists. 15 02 2006 13 01 2007 heat transfer plates (structures) pipes discs (structures) pipe flow...

... pipes mechanical contact thermal contact conductance fin-tube heat exchanger thermal contact resistance bullet size interstitial gas Compact heat exchangers are most commonly made with aluminum plate-fins and copper tubes. The interfaces between the tubes and fins are generally formed...

...Yaxiong Wang, Senior Engineer, ASME Member; G. P. Peterson, Professor of Mechanical Engineering, ASME Fellow A novel flat heat pipe has been developed to assist in meeting the high thermal design requirements in high power microelectronics, power converting systems, laptop computers and spacecraft...