Microscale fluid dynamics has received intensive interest due to the emergence of microelectromechanical systems technology. When the mean free path of the gas is comparable to the channel’s characteristic dimension, the continuum assumption is no longer valid and velocity slip and temperature jump may occur at the duct walls. Slip flow heat transfer in annular microchannels has been examined. The effects of velocity slip and temperature jump on the hydrodynamically and thermally fully developed heat transfer characteristics for laminar flow have been studied analytically. The analysis is carried out for both uniform wall heat flux on one wall, adiabatic on the other wall, and uniform wall heat flux on both walls. The results indicate that the slip flow Nusselt numbers are lower than those for continuum flow and decrease with an increase in Knudsen number for most practical engineering applications. The effects of Knudsen number, radius ratio, and heat flux ratio on heat transfer characteristics are discussed, respectively.
Skip Nav Destination
e-mail: zpduan@engr.mun.ca
e-mail: yuri@engr.mun.ca
Article navigation
September 2008
This article was originally published in
Journal of Heat Transfer
Research Papers
Slip Flow Heat Transfer in Annular Microchannels With Constant Heat Flux
Zhipeng Duan,
Zhipeng Duan
Faculty of Engineering and Applied Science,
e-mail: zpduan@engr.mun.ca
Memorial University of Newfoundland
, St. John’s, NL, A1B 3X5, Canada
Search for other works by this author on:
Y. S. Muzychka
Y. S. Muzychka
Faculty of Engineering and Applied Science,
e-mail: yuri@engr.mun.ca
Memorial University of Newfoundland
, St. John’s, NL, A1B 3X5, Canada
Search for other works by this author on:
Zhipeng Duan
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland
, St. John’s, NL, A1B 3X5, Canadae-mail: zpduan@engr.mun.ca
Y. S. Muzychka
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland
, St. John’s, NL, A1B 3X5, Canadae-mail: yuri@engr.mun.ca
J. Heat Transfer. Sep 2008, 130(9): 092401 (8 pages)
Published Online: July 8, 2008
Article history
Received:
March 30, 2007
Revised:
February 15, 2008
Published:
July 8, 2008
Citation
Duan, Z., and Muzychka, Y. S. (July 8, 2008). "Slip Flow Heat Transfer in Annular Microchannels With Constant Heat Flux." ASME. J. Heat Transfer. September 2008; 130(9): 092401. https://doi.org/10.1115/1.2946474
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Gas Microflows in the Slip Flow Regime: A Critical Review on Convective Heat Transfer
J. Heat Transfer (February,2012)
Heat Transfer Characteristics of Gaseous Slip Flow in Concentric Micro-Annular Tubes
J. Heat Transfer (July,2011)
Gaseous Slip Flow Mixed Convection in Vertical Microducts With Constant Axial Energy Input
J. Heat Transfer (March,2014)
Viscous Dissipation and Rarefaction Effects on Laminar Forced Convection in Microchannels
J. Heat Transfer (July,2010)
Related Chapters
The Design and Implement of Remote Inclinometer for Power Towers Based on MXA2500G/GSM
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Application of Universal Functions
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine
Circular Flux Tubes and Disks
Thermal Spreading and Contact Resistance: Fundamentals and Applications