The relationship between the mean radial electrohydrodynamic (EHD) pressure and the rate of the axial momentum flux and its influence on heat transfer enhancement and pressure drop in EHD-enhanced convective boiling of R-134a in a horizontal smooth tube was investigated in detail. A simple theory, which included the characteristics of two-phase flow, was developed to determine the mean radial EHD pressure. It was shown that the amount of heat transfer enhancement and the pressure drop penalty were dependent upon the size of the mean radial EHD pressure relative to the rate of the axial momentum flux. The influence of the mass flux, change in quality, and saturation temperature on the mean radial EHD pressure relative to the rate of the axial momentum flux was also studied. This study has provided a greater understanding of EHD enhancement of the convective boiling heat transfer. [S0022-1481(00)01802-8]
Skip Nav Destination
Article navigation
Technical Papers
Electrohydrodynamically Enhanced Convective Boiling: Relationship Between Electrohydrodynamic Pressure and Momentum Flux Rate
J. E. Bryan,
J. E. Bryan
Outokumpu Copper, 4720 Bowling Green Road, Franklin, KY 42134
Search for other works by this author on:
J. Seyed-Yagoobi
J. Seyed-Yagoobi
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123
Search for other works by this author on:
J. E. Bryan
Outokumpu Copper, 4720 Bowling Green Road, Franklin, KY 42134
J. Seyed-Yagoobi
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123
Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division, December 1, 1997; revision received, November 4, 1999. Associated Technical Editor: M. S. Sohal.
J. Heat Transfer. May 2000, 122(2): 266-277 (12 pages)
Published Online: November 4, 1999
Article history
Received:
December 1, 1997
Revised:
November 4, 1999
Citation
Bryan, J. E., and Seyed-Yagoobi, J. (November 4, 1999). "Electrohydrodynamically Enhanced Convective Boiling: Relationship Between Electrohydrodynamic Pressure and Momentum Flux Rate ." ASME. J. Heat Transfer. May 2000; 122(2): 266–277. https://doi.org/10.1115/1.521464
Download citation file:
Get Email Alerts
Cited By
Related Articles
Linear Instability Analysis of a Horizontal Two-Phase Flow in the Presence of Electrohydrodynamic Extraction Force
J. Heat Transfer (February,2002)
A Mesoscale Electrohydrodynamic-Driven Two-Phase Flow Heat Transport Device in Circular Geometry and In-Tube Boiling Heat Transfer Coefficient Under Low Mass Flux
J. Heat Transfer (April,2015)
Influence of Flow Regime, Heat Flux, and Mass Flux on Electrohydrodynamically Enhanced Convective Boiling
J. Heat Transfer (April,2001)
Related Proceedings Papers
Related Chapters
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment
Liquid Cooled Systems
Thermal Management of Telecommunication Equipment, Second Edition
Liquid Cooled Systems
Thermal Management of Telecommunications Equipment