The topography of rough surfaces strongly influences the conduction of heat and electricity between two surfaces in contact. Roughness measurements on a variety of surfaces have shown that their structure follows a fractal geometry whereby similar images of the surface appear under repeated magnification. Such a structure is characterized by the fractal dimension D, which lies between 2 and 3 for a surface and between 1 and 2 for a surface profile. This paper uses the fractal characterization of surface roughness to develop a new network model for analyzing heat conduction between two contacting rough surfaces. The analysis yields the simple result that the contact conductance h and the real area of contact At are related as h ~ AtD/2 where D is the fractal dimension of the surface profile. Contact mechanics of fractal surfaces has shown that At varies with the load F as At ~ Fη where η ranges from 1 to 1.33 depending on the value of D. This proves that the conductance and load are related as h ~ FηD/2 and resolves the anomaly in previous investigations, which theoretically and experimentally obtained different values for the load exponent. The analytical results agreed well with previous experiments although there is a tendency for overprediction.
Skip Nav Destination
Article navigation
Research Papers
Fractal Network Model for Contact Conductance
A. Majumdar,
A. Majumdar
Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287
Search for other works by this author on:
C. L. Tien
C. L. Tien
Office of the Chancellor, University of California, Berkeley, CA 94720
Search for other works by this author on:
A. Majumdar
Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287
C. L. Tien
Office of the Chancellor, University of California, Berkeley, CA 94720
J. Heat Transfer. Aug 1991, 113(3): 516-525 (10 pages)
Published Online: August 1, 1991
Article history
Received:
May 16, 1990
Revised:
January 12, 1991
Online:
May 23, 2008
Citation
Majumdar, A., and Tien, C. L. (August 1, 1991). "Fractal Network Model for Contact Conductance." ASME. J. Heat Transfer. August 1991; 113(3): 516–525. https://doi.org/10.1115/1.2910594
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Prediction of Thermal Contact Conductance in Vacuum by Statistical Mechanics
J. Heat Transfer (February,1998)
Thermal Rectification in Similar and Dissimilar Metal Contacts
J. Heat Transfer (February,1991)
Thermal Contact Conductance of Spherical Rough Metals
J. Heat Transfer (November,1997)
Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces
J. Tribol (October,2005)
Related Proceedings Papers
Related Chapters
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Introduction
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment, Second Edition