... settings, which are not able to capture the dynamic nature of particle deposition. Additionally, while there exists several studies in literature on solid particle erosion of EBCs and TBCs [ 4 , 8 – 15 ], no standard exists for high-temperature evaluation of these materials and other materials under...

... engine hardware resulting in localized damage and material removal due to repeated, cumulative impacts. In this study, the erosion behavior of a melt-infiltrated (MI) silicon carbide fiber-reinforced silicon carbide (SiC/SiC) ceramic matrix composite is investigated at high temperature (1200 °C...

.... Editor: David Wisler. 28 03 2014 07 05 2014 A multi-axial continuum damage mechanics (CDM) model was proposed to calculate the multi-axial creep–fatigue damage of a high temperature component. A specific outer cylinder of a 1000 MW supercritical steam turbine was used in this study...

... conducted on both CC and DS Ni base superalloys (IN738LC and GTD111DS) at high temperatures. The strain ratio ϕ was defined as the ratio between the x and y directional strains at 1/4 cycle and was varied from 1 to − 1 . In ϕ = 1 and − 1 . The main cracks propagated in both the x and y directions in the CC...

... chromium compounds hardness ion plating protective coatings steam turbines thermal spraying wear resistance erosion experiment high temperature boride coating steam turbine Iron oxide scales exfoliated from the inner wall of the boiler tube and main steam pipe is known to cause...