In this study, the viability, performance, and characteristics of a turbojet-to-turbofan conversion through the use of a continuously variable transmission (CVT) are investigated. By an in-house thermodynamic simulation code, the performance of the simple cycle turbojet, a direct shaft joined turbofan, and a CVT coupled turbofan with variable bypass is contrasted. The baseline turbojet and turbofan findings are validated against a commercial software. The comparison indicates high quantitative agreement. Analyzing the results of the turbofan engine equipped with a variable bypass and CVT, it is observed that both the thrust and the efficiency are increased. The augmented thrust is observed to be an artifact of enhanced component matching and wider operational range introduced by variable bypass capability. On the other hand, the introduction of CVT contributes to the reduction in fuel consumption. Therefore, the current research suggests that adaptation of a micro-turbojet into a variable cycle micro-turbofan will greatly improve the performance and efficiency of existing engines, in addition to providing a pathway toward extended use in various applications.
Skip Nav Destination
Article navigation
February 2017
Research-Article
Micro-Turbojet to Turbofan Conversion Via Continuously Variable Transmission: Thermodynamic Performance Study
Kobi Kadosh,
Kobi Kadosh
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology,
Technion City,
Haifa 32000, Israel
e-mail: kobi.kadosh@campus.technion.ac.il
Aerospace Department,
Technion-Israel Institute of Technology,
Technion City,
Haifa 32000, Israel
e-mail: kobi.kadosh@campus.technion.ac.il
Search for other works by this author on:
Beni Cukurel
Beni Cukurel
Assistant Professor
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology, Technion City,
Haifa 32000, Israel
e-mail: beni@cukurel.org
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology, Technion City,
Haifa 32000, Israel
e-mail: beni@cukurel.org
Search for other works by this author on:
Kobi Kadosh
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology,
Technion City,
Haifa 32000, Israel
e-mail: kobi.kadosh@campus.technion.ac.il
Aerospace Department,
Technion-Israel Institute of Technology,
Technion City,
Haifa 32000, Israel
e-mail: kobi.kadosh@campus.technion.ac.il
Beni Cukurel
Assistant Professor
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology, Technion City,
Haifa 32000, Israel
e-mail: beni@cukurel.org
Turbomachinery and Heat Transfer Laboratory,
Aerospace Department,
Technion-Israel Institute of Technology, Technion City,
Haifa 32000, Israel
e-mail: beni@cukurel.org
1Corresponding author.
Contributed by the Turbomachinery Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received June 20, 2016; final manuscript received July 4, 2016; published online September 13, 2016. Editor: David Wisler.
J. Eng. Gas Turbines Power. Feb 2017, 139(2): 022603 (10 pages)
Published Online: September 13, 2016
Article history
Received:
June 20, 2016
Revised:
July 4, 2016
Citation
Kadosh, K., and Cukurel, B. (September 13, 2016). "Micro-Turbojet to Turbofan Conversion Via Continuously Variable Transmission: Thermodynamic Performance Study." ASME. J. Eng. Gas Turbines Power. February 2017; 139(2): 022603. https://doi.org/10.1115/1.4034262
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Mission Analysis and Operational Optimization of Adaptive Cycle Microturbofan Engine in Surveillance and Firefighting Scenarios
J. Eng. Gas Turbines Power (January,2019)
Dual Drive Booster for a Two-Spool Turbofan: Performance Effects and Mechanical Feasibility
J. Eng. Gas Turbines Power (February,2016)
Flowfield and Performance Analysis of a Three-Dimensional TBCC Exhaust Nozzle
J. Eng. Gas Turbines Power (November,2017)
Installed Performance Assessment of an Array of Distributed Propulsors Ingesting Boundary Layer Flow
J. Eng. Gas Turbines Power (July,2018)
Related Proceedings Papers
Related Chapters
Development of New Process and Product Monitoring Technologies for the Manufacturing of High Value Alloy Steels for Use in Critical Applications
Bearing and Transmission Steels Technology
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines
Solution of Phased-Mission Benchmark Problem Using the SimPRA Dynamic PRA Methdology (PSAM-0345)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)