Alternative resources, such as biomass, and municipal and industrial waste are being considered as a source for the production of syngas to replace natural gas as a power turbine fuel. Pyrolysis of biomass produces a syngas composed primarily of CO, , , and with a medium-low lower heating value that is strongly dependent on the process boundary conditions such as the pyrolysis temperature and product residence time in the reactor. The issues associated with conventional gas turbines also apply to syngas turbines with the added complexity of the fuel and impurities. At present, syngas turbines are operated at firing temperatures similar to those of turbines fired on natural gas by increasing the fuel mass flow through the turbine. While this produces a higher turbine power output, the heat transferred to the hot flow-path vanes and blades is also greater. The aim of this paper is to report on the use of numerical modeling to analyze the fundamental impact of firing gas turbines with biomass pyrolysis syngas. To complete the analysis, the results have been compared with data from the literature on gas turbines fired with coal gasification syngas. The test engine used to perform this analysis is a General Electric GE10-2 gas turbine. The performance, aerodynamics and secondary flows were computed using proprietary software, while a commercial finite element software was used to perform the thermal and local creep analyses.
Skip Nav Destination
Article navigation
June 2010
Research Papers
Gas Turbines Fired With Biomass Pyrolysis Syngas: Analysis of the Overheating of Hot Gas Path Components
Stefania Della Gatta,
Stefania Della Gatta
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Search for other works by this author on:
Roberto De Prosperis,
Roberto De Prosperis
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Search for other works by this author on:
Alessandro Russo,
Alessandro Russo
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Search for other works by this author on:
Francesco Fantozzi,
Francesco Fantozzi
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 1A/4, 06125 Perugia, Italy
Search for other works by this author on:
Umberto Desideri
Umberto Desideri
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 1A/4, 06125 Perugia, Italy
Search for other works by this author on:
Simone Colantoni
Stefania Della Gatta
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Roberto De Prosperis
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Alessandro Russo
GE Oil & Gas
, Via F. Matteucci 2, 50127 Florence, Italy
Francesco Fantozzi
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 1A/4, 06125 Perugia, Italy
Umberto Desideri
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 1A/4, 06125 Perugia, ItalyJ. Eng. Gas Turbines Power. Jun 2010, 132(6): 061401 (8 pages)
Published Online: March 19, 2010
Article history
Received:
April 15, 2009
Revised:
July 14, 2009
Online:
March 19, 2010
Published:
March 19, 2010
Citation
Colantoni, S., Della Gatta, S., De Prosperis, R., Russo, A., Fantozzi, F., and Desideri, U. (March 19, 2010). "Gas Turbines Fired With Biomass Pyrolysis Syngas: Analysis of the Overheating of Hot Gas Path Components." ASME. J. Eng. Gas Turbines Power. June 2010; 132(6): 061401. https://doi.org/10.1115/1.4000134
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Determination of Composition of Cellulose and Lignin Mixtures Using Thermogravimetric Analysis
J. Energy Resour. Technol (June,2009)
Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste — Part II: Introducing Product Yields in the Energy Balance
J. Eng. Gas Turbines Power (October,2007)
Integrated Pyrolysis Regenerated Plant (IPRP): An Efficient and Scalable Concept for Gas Turbine Based Energy Conversion From Biomass and Waste
J. Eng. Gas Turbines Power (April,2005)
Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste—Part I: Working Envelope of the Reactor
J. Eng. Gas Turbines Power (October,2007)
Related Proceedings Papers
Related Chapters
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition
Introduction
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration