A new reduction method for vibration analysis of intentionally mistuned bladed disks is presented. The method is built for solving the dynamic problem of cyclic structures with geometric modifications. It is based on the use of the cyclic modes of the different sectors, which can be obtained from a usual cyclic symmetry modal analysis. Hence the projection basis is constituted; as well as, on the whole bladed disk, each sector matrix is reduced by its own modes. The method is validated numerically on a real bladed disk model, by comparing free and forced responses of a full model finite element analysis to those of a reduced-order model using the new reduction method.
Issue Section:
Gas Turbines: Structures and Dynamics
1.
Whitehead
, D.
, 1966, “Effects of Mistuning on the Vibration of Turbomachine Blades Induced by Wakes
,” J. Mech. Eng. Sci.
0022-2542, 8
(1
), pp. 15
–21
.2.
Dye
, R.
, and Henry
, T.
, 1969, “Vibration Amplitudes of Compressor Blades Resulting From Scatter in Blade Natural Frequencies
,” ASME J. Eng. Power
0022-0825, 91
(3
), pp. 182
–187
.3.
Capiez-Lernout
, E.
, and Soize
, C.
, 2004, “Nonparametric Modeling of Random Uncertainties for Dynamic Response of Mistuned Bladed Disks
,” ASME J. Eng. Gas Turbines Power
0742-4795, 126
(3
), pp. 610
–618
.4.
Ewins
, D.
, 1969, “The Effects of Detuning Upon the Forced Vibrations of Bladed Disks
,” J. Sound Vib.
0022-460X, 9
(1
), pp. 65
–72
.5.
Choi
, B. -K.
, Lentz
, J.
, Rivas-Guerra
, A.
, and Mignolet
, M.
, 2003, “Optimization of Intentional Mistuning Patterns for the Reduction of the Forced Response Effects of Unintentional Mistuning: Formulation and Assessment
,” ASME J. Eng. Gas Turbines Power
0742-4795, 125
, pp. 131
–140
.6.
Castanier
, M.
, Ottarson
, G.
, and Pierre
, C.
, 1997, “Reduced Order Modeling Technique for Mistuned Bladed Disks
,” ASME J. Vibr. Acoust.
0739-3717, 119
(3
), pp. 439
–447
.7.
Castanier
, M.
, and Pierre
, C.
, 2002, “Using Intentional Mistuning in the Design of Turbomachinery Rotors
,” AIAA J.
0001-1452, 40
(10
), pp. 2077
–2086
.8.
Mignolet
, M.
, Hu
, W.
, and Jadic
, I.
, 2000, “On the Forced Response of Harmonically and Partially Mistuned Bladed Disks. Part 1: Harmonic Mistuning, Part 2: Partial Mistuning and Applications
,” Int. J. Rotating Mach.
1023-621X, 6
(1
), pp. 29
–41
.9.
Thomas
, D.
, 1979, “Dynamics of Rotationally Periodic Structures
,” Int. J. Numer. Methods Eng.
0029-5981, 14
(1
), pp. 81
–102
.10.
Jacquet-Richardet
, G.
, Ferraris
, G.
, and Rieutord
, P.
, 1996, “Frequencies and Modes of Rotating Flexible Bladed Disc Shaft Assemblies: A Global Cyclic Symmetry Approach
,” J. Sound Vib.
0022-460X, 191
(5
), pp. 901
–915
.11.
Williams
, F.
, Kennedy
, D.
, Wu
, G.
, and Zhou
, J.
, 1996, “Exact Computation of Natural Frequencies of Repetitive Structures
,” Struct. Eng. Mech.
1225-4568, 4
(5
), pp. 553
–568
.12.
Ohayon
, R.
, and Soize
, C.
, 1998, Structural Acoustics and Vibration
, Academic
, New York
.13.
Bladh
, R.
, Castanier
, M.
, and Pierre
, C.
, 1999, “Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds
,” ASME J. Eng. Gas Turbines Power
0742-4795, 121
(3
), pp. 515
–522
.14.
Bladh
, R.
, Castanier
, M.
, and Pierre
, C.
, 2001, “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part I: Theoretical Models
,” ASME J. Eng. Gas Turbines Power
0742-4795, 123
(1
), pp. 89
–99
.15.
Yang
, M. -T.
, and Griffin
, J. H.
, 2001, “A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes
,” ASME J. Eng. Gas Turbines Power
0742-4795, 123
(4
), pp. 893
–900
.16.
Feiner
, D.
, and Griffin
, J.
, 2002, “A Fundamental Model of Mistuning for a Single Family of Modes
,” ASME J. Turbomach.
0889-504X, 124
, pp. 597
–605
.17.
Feiner
, D. M.
, and Griffin
, J. H.
, 2004, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model—Part I: Theory
,” ASME J. Turbomach.
0889-504X, 126
, pp. 150
–158
.18.
Feiner
, D. M.
, and Griffin
, J. H.
, 2004, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model—Part II: Application
,” ASME J. Turbomach.
0889-504X, 126
, pp. 159
–165
.19.
Lim
, S. -H.
, Castanier
, M.
, and Pierre
, C.
, 2004, “Vibration Modeling of Bladed Disks Subject to Geometric Mistuning and Design Changes
,” Proceedings of the 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Material Conference
, Palm Springs, CA
, Paper No. 2004-1686.20.
Martel
, C.
, Corral
, R.
, and Llorens
, J.
, 2008, “Stability Increase of Aerodynamically Unstable Rotor Using Intentional Mistuning
,” Proceedings of the ASME TURBO EXPO 2008
.21.
Martel
, C.
, and Corral
, R.
, 2008, “Asymptotic Description of Maximum Mistuning Amplification of Bladed Disk Forced Response
,” Proceedings of the ASME TURBO EXPO 2008
.22.
Sinha
, A.
, 2009, “Reduced-Order Model of a Bladed Rotor With Geometric Mistuning
,” ASME J. Turbomach.
0889-504X, 131
, p. 031007
.23.
Ganine
, V.
, Legrand
, M.
, Pierre
, C.
, and Michalska
, H.
, 2008, “A Reduction Technique for Mistuned Bladed Disks With Superposition of Large Geometric Mistuning and Small Model Uncertainties
,” Proceedings of the 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
, Honolulu, HI
, Paper No. 2008-20158.24.
Ohayon
, R.
, Sampaio
, R.
, and Soize
, C.
, 1997, “Dynamic Substructuring of Damped Structures Using the Singular Value Decomposition
,” ASME J. Appl. Mech.
0021-8936, 64
(2
), pp. 292
–298
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
