A rather complete mathematical model for a common-rail injection-system dynamics numerical simulation was developed to support experimentation, layout, and control design, as well as performance optimization. The thermofluid dynamics of the hydraulic-system components, including rail, connecting pipes, and injectors was modeled in conjunction with the solenoid-circuit electromagnetics and the mechanics of mobile elements. One-dimensional flow equations in conservation form were used to simulate wave propagation phenomena throughout the high-pressure connecting pipes, including the feeding pipe of the injector nozzle. In order to simulate the temperature variations due to the fuel compressibility, the energy equation was used in addition to mass conservation and momentum balance equations. Besides, the possible cavitation phenomenon effects on the mass flow rate through the injector bleed orifice and the nozzle holes were taken into account. A simple model of the electromagnetic driving circuit was used to predict the temporal distribution of the force acting on the pilot-valve anchor. It was based on the experimental time histories of the current through the solenoid and of the associated voltage that is provided by the electronic control unit to the solenoid. The numerical code was validated through the comparison of the prediction results with experimental data, that is, pressure, injected flow rate, and needle lift time histories, taken on a high performance test bench Moehwald-Bosch MEP2000-CA4000. The novel injection-system mathematical model was applied to the analysis of transient flows through the hydraulic circuit of a commercial multijet second-generation common-rail system, paying specific attention to the wave propagation phenomena, to their dependence on solenoid energizing time and rail pressure, as well as to their effects on system performance. In particular, an insight was also given into the model capability of accurately predicting the wave dynamics effects on the rate and mass of fuel injected when the dwell time between two consecutive injections is varied.
Skip Nav Destination
Article navigation
November 2008
Research Papers
Development and Application of a Complete Multijet Common-Rail Injection-System Mathematical Model for Hydrodynamic Analysis and Diagnostics
Andrea E. Catania,
Andrea E. Catania
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)
Search for other works by this author on:
Alessandro Ferrari,
Alessandro Ferrari
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)
Search for other works by this author on:
Michele Manno
Michele Manno
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)
Search for other works by this author on:
Andrea E. Catania
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)
Alessandro Ferrari
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)
Michele Manno
IC Engines Advanced Laboratory
, Politecnico di Torino, C.so Duca degli Abruzzi, 24 10129 - Torino (Italy)J. Eng. Gas Turbines Power. Nov 2008, 130(6): 062809 (13 pages)
Published Online: August 25, 2008
Article history
Received:
April 14, 2007
Revised:
October 15, 2007
Published:
August 25, 2008
Citation
Catania, A. E., Ferrari, A., and Manno, M. (August 25, 2008). "Development and Application of a Complete Multijet Common-Rail Injection-System Mathematical Model for Hydrodynamic Analysis and Diagnostics." ASME. J. Eng. Gas Turbines Power. November 2008; 130(6): 062809. https://doi.org/10.1115/1.2925679
Download citation file:
Get Email Alerts
Cited By
On Leakage Flows In A Liquid Hydrogen Multi-Stage Pump for Aircraft Engine Applications
J. Eng. Gas Turbines Power
A Computational Study of Temperature Driven Low Engine Order Forced Response In High Pressure Turbines
J. Eng. Gas Turbines Power
The Role of the Working Fluid and Non-Ideal Thermodynamic Effects on Performance of Gas Lubricated Bearings
J. Eng. Gas Turbines Power
Tool wear prediction in broaching based on tool geometry
J. Eng. Gas Turbines Power
Related Articles
Numerical Analysis and Experimental Investigation of a Common Rail-Type Diesel Injector
J. Eng. Gas Turbines Power (October,2004)
Numerical-Experimental Study and Solutions to Reduce the Dwell-Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type CR System
J. Eng. Gas Turbines Power (March,2009)
Experimental Validation of a Common-Rail Injector Model in the Whole
Operation Field
J. Eng. Gas Turbines Power (April,2007)
Hydraulic Circuit Design Rules to Remove the Dependence of the Injected Fuel Amount on Dwell Time in Multijet CR Systems
J. Fluids Eng (December,2008)
Related Proceedings Papers
Related Chapters
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables
Internal and Near Nozzle Flow Simulations of Gasoline Multi-Hole Injector (ECN Spray G) with Transient Needle Motion
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach