A microscale electrically heated rotary kiln for slow pyrolysis of biomass and waste was designed and built at the University of Perugia. The reactor is connected to a wet scrubbing section, for tar removal, and to a monitored combustion chamber to evaluate the lower heating value of the syngas. The system allows the evaluation of gas, tar, and char yields for different pyrolysis temperature and residence time. The feeding screw conveyor and the kiln are rigidly connected; therefore a modification of the flow rate implies a modification of the inside solid motion and of residence time. Part I of the paper describes the theoretical and experimental evaluation of the working envelope of the reactor, that is, rotational speed as a function of feedstock density and humidity content, to obtain pyrolysis conditions inside the kiln. This paper describes the development and resolution of an energy balance of the reactor under pyrolysis conditions. Once the rotational speed is fixed, the aim of the balance is to obtain the yield of wood biomass pyrolysis products such as syngas, tar, and char. Results can be used to choose the correct rotational speed of kiln and feeding screw before doing the real pyrolysis test.
Skip Nav Destination
e-mail: fanto@unipg.it
e-mail: simone_colantoni@unipg.it
e-mail: bartocci@crbnet.it
e-mail: umberto.desideri@unipg.it
Article navigation
October 2007
Technical Papers
Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste — Part II: Introducing Product Yields in the Energy Balance
Francesco Fantozzi,
Francesco Fantozzi
Department of Industrial Engineering,
e-mail: fanto@unipg.it
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italy
Search for other works by this author on:
Simone Colantoni,
Simone Colantoni
Department of Industrial Engineering,
e-mail: simone_colantoni@unipg.it
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italy
Search for other works by this author on:
Pietro Bartocci,
Pietro Bartocci
Biomass Research Center,
e-mail: bartocci@crbnet.it
University of Perugia
, Via M. Iorio 8, 06125 Perugia, Italy
Search for other works by this author on:
Umberto Desideri
Umberto Desideri
Department of Industrial Engineering,
e-mail: umberto.desideri@unipg.it
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italy
Search for other works by this author on:
Francesco Fantozzi
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italye-mail: fanto@unipg.it
Simone Colantoni
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italye-mail: simone_colantoni@unipg.it
Pietro Bartocci
Biomass Research Center,
University of Perugia
, Via M. Iorio 8, 06125 Perugia, Italye-mail: bartocci@crbnet.it
Umberto Desideri
Department of Industrial Engineering,
University of Perugia
, Via G. Duranti 67, 06125 Perugia, Italye-mail: umberto.desideri@unipg.it
J. Eng. Gas Turbines Power. Oct 2007, 129(4): 908-913 (6 pages)
Published Online: January 5, 2007
Article history
Received:
July 11, 2006
Revised:
January 5, 2007
Connected Content
Citation
Fantozzi, F., Colantoni, S., Bartocci, P., and Desideri, U. (January 5, 2007). "Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste — Part II: Introducing Product Yields in the Energy Balance." ASME. J. Eng. Gas Turbines Power. October 2007; 129(4): 908–913. https://doi.org/10.1115/1.2720539
Download citation file:
Get Email Alerts
An Experimental Comparison of Methanol Combustion Strategies: Spark Ignition Versus Compression Ignition
J. Eng. Gas Turbines Power
Systems-Based Approach To Predicting Tbc Delamination Due To Cmas Infiltration
J. Eng. Gas Turbines Power
Related Articles
Rotary Kiln Slow Pyrolysis for Syngas and Char Production From Biomass and Waste—Part I: Working Envelope of the Reactor
J. Eng. Gas Turbines Power (October,2007)
Integrated Pyrolysis Regenerated Plant (IPRP): An Efficient and Scalable Concept for Gas Turbine Based Energy Conversion From Biomass and Waste
J. Eng. Gas Turbines Power (April,2005)
Determination of Composition of Cellulose and Lignin Mixtures Using Thermogravimetric Analysis
J. Energy Resour. Technol (June,2009)
Gas Turbines Fired With Biomass Pyrolysis Syngas: Analysis of the Overheating of Hot Gas Path Components
J. Eng. Gas Turbines Power (June,2010)
Related Proceedings Papers
Related Chapters
Bioenergy Including Biomass and Biofuels
Biomass and Waste Energy Applications
BioEnergy Including BioMass and BioFuels
Energy and Power Generation Handbook: Established and Emerging Technologies
The Synthesize Bio-Oil from Manila Grass (Zoysia Matrell (L.) Merr.) Transformed By Pyrolysis
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)