Abstract

A high-performance four-stroke motorcycle engine was analyzed at a steady flow rig. The aim of the work was to characterize the fluid dynamic behavior of the engine head during the intake phase. To this purpose a twofold approach was adopted: the dimensionless flow coefficient was used to evaluate the global breathability of the intake system, while the laser doppler anemometry (LDA) technique was employed to define the flow structure within the combustion chamber. The analysis gave evidence of two contrarotating vortices with axes parallel to the cylinder axis and showed variations in the flow structure when moving away from the engine head. Furthermore, the study highlighted the great influence of the throttle angle on the head fluid dynamic efficiency and how this influence changes with the valve lift. Experimental data were correlated by a single curve adopting a new dimensionless plot. Moreover, LDA measurements were used to evaluate the angular momentum of the flux and an equivalent swirl coefficient, and to correlate them to a previous global swirl characterization carried out on the same engine head using an impulse swirl meter.

1.
Heywood
,
J. B.
, 1998,
Internal Combustion Engine Fundamentals
,
McGraw–Hill
,
New York
.
2.
Zhijun
,
W.
, and
Zhen
,
H.
, 2001, “
In-Cylinder Swirl Formation Process In Four-Valve Diesel Engine
,”
Exp. Fluids
0723-4864,
31
, pp.
467
473
.
3.
Choi
,
W.-C.
, and
Guezennec
,
Y. G.
, 1999, “
Study of the Flow Field Development During the Intake Stroke in an IC Engine Using 2-D PIV and 3-D PTV
,” SAE Paper No. 1999-01-0957.
4.
Pignone
,
G. A.
, and
Vercelli
,
U. R.
, 2003,
Motori ad Alta Potenza Specifica
, (in Italian), Giorgio Nada Editore, Milan.
5.
Algieri
,
A.
, and
Bova
,
S.
, 2004, “
Influence of Valve-Wall Distance on the Intake Flow in High Performance I.C.E.
,” SAE Paper No. 2004-01-1922,
Direct Fuel Injection, Engine Diagnostics, and New Developments in Powertrain Tribology, CVT, ATF & Fuel Economy
, SAE Special Publication No. SP-1891.
6.
Li
,
Y.
,
Zhao
,
H.
,
Leach
,
B.
,
Ma
,
T.
, and
Ladommatos
,
N.
, 2003, “
Optimization of In-Cylinder Flow for Fuel Stratification in a Three-Valve Twin-Spark-Plug SI Engine
,” SAE Paper No. 2003-01-0653.
7.
Crnojevic
,
C.
,
Decool
,
F.
, and
Florent
,
P.
, 1999, “
Swirl Measurements in a Motored Cylinder
,”
Exp. Fluids
0723-4864,
26
, pp.
542
548
.
8.
Arcoumanis
,
C.
,
Nouri
,
J.
,
Xu
,
H. M.
, and
Stone
,
R.
, 1997, “
Analysis of the Steady Flow Characteristics of Tumble-Generating Four-Valve Cylinder Heads
,”
Opt. Diagnost. Eng.
,
2
(
2
), pp.
71
83
.
9.
Jasak
,
H.
,
Luo
,
J. Y.
,
Kaludercic
,
B.
,
Gosman
,
A. D.
,
Echtle
,
H.
,
Liang
,
Z.
,
Wirbeleit
,
F.
,
Wierse
,
M.
,
Rips
,
S.
,
Werner
,
A.
,
Fernstrom
,
G.
, and
Karlsson
,
H.
, 1999, “
Rapid CFD Simulation of Internal Combustion Engines
,” SAE Paper No. 1999-01-1185.
10.
Bianchi
,
G. M.
, and
Fontanesi
,
S.
, 2003, “
On the Applications of Low-Reynolds Cubic k-ε Turbulence Models in 3D Simulations of ICE Intake Flows
,” SAE Paper No. 2003-01-0003.
11.
Laimbock
,
F. J.
,
Klasnic
,
H.
,
Grilc
,
S.
,
Meister
,
G. F.
, and
Dorfstatter
,
M. J.
, 1999, “
SVL SDIS Mk. II: Low Cost Automotive FI Applied to 2-Stroke Engines for Future CARB-Regulations
,” SAE Paper No. 1999-01-3285.
12.
Xu
,
H.
, 2001, “
Some Critical Technical Issues on the Steady Flow Testing of Cylinder Heads
,” SAE Paper No. 2001-01-13.
13.
Kang
,
K. Y.
, and
Baek
,
J. H.
, 1995, “
LDV Measurement and Analysis of Tumble Formation and Decay in a Four-Valve Engine
,”
Exp. Therm. Fluid Sci.
0894-1777,
11
, pp.
181
189
.
14.
Blair
,
G. P.
,
McBurney
,
D.
,
McDonald
,
P.
,
McKernan
,
P.
, and
Fleck
,
R.
, 1998, “
Some Fundamental Aspects of the Discharge Coefficients of Cylinder Porting and Ducting Restrictions
,” SAE Paper No. 980764.
15.
Bohac
,
S. V.
, and
Landfahrer
,
K.
, 1999, “
Effects of Pulsating Flow on Exhaust Port Flow Coefficients
,” SAE Paper No. 1999-01-0214.
16.
Blair
,
G. P.
, and
Drouin
,
F. M. M.
, 1996, “
Relationship Between Discharge Coefficients and Accuracy of Engine Simulation
,” SAE Paper No. 962527.
17.
Chan
,
V. S. S.
, and
Turner
,
J. T.
, 2000, “
Velocity Measurement Inside a Motored Internal Combustion Engine Using Three-Component Laser Doppler Anemometry
,”
Opt. Laser Technol.
0030-3992,
32
, pp.
557
566
.
18.
Payri
,
F.
,
Desantes
,
M.
, and
Pastor
,
J. V.
, 1996, “
LDV Measurements of the Flow Inside the Combustion Chamber of a 4-Valve D.I. Diesel Engine With Axisymmetric Piston-Bowls
,”
Exp. Fluids
0723-4864,
22
, pp.
118
128
.
19.
Bevan
,
K. E.
, and
Ghandhi
,
J. B.
, 2004, “
PIV Measurements of In-Cylinder Flow in a Four-Stroke Utility Engine and Correlation With Steady Flow Results
,” SAE Paper No. 2004-32-0005.
20.
El Tahry
,
S. H.
,
Khalighi
,
B.
, and
Kuziak
,
W. R. J.
, 1987, “
Unsteady-Flow Velocity Measurements Around an Intake Valve of a Reciprocating Engine
,” SAE Paper No. 870593.
21.
Ohm
,
I. Y.
, and
Cho
,
Y. S.
, 2000, “
Mechanism of Axial Stratification and Its Effect in an SI Engine
,” SAE Paper No. 2000-01-2843.
22.
Stier
,
B.
, and
Koochesfahani
,
M. M.
, 1999, “
Molecular Tagging Velocimetry (MTV) measurements in Gas Phase Flows
,”
Exp. Fluids
0723-4864,
26
, pp.
297
304
.
23.
Hascher
,
H. G.
,
Novak
,
M.
,
Lee
,
K.
,
Schock
,
H. J.
,
Rezaei
,
H.
, and
Koochesfahani
,
M.
, 1998, “
An Evaluation of IC-Engine Flows With the Use of Modern In-Cylinder Measuring Techniques
,” 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July 13–15, Cleveland, OH.
24.
Carrera
,
M. A.
, 2004, “
Caratterizzazione Fluidodinamica di Teste di MCI ad Elevate Prestazioni
,” Thesis (in Italian), Mechanics Department, University of Calabria.
25.
Amelio
,
M.
,
Bova
,
S.
, and
De Bartolo
,
C.
, 2000, “
The Separation Between Turbulence and Mean Flow in ICE LDV Data: The Complementary Point-of-View of Different Investigation Tools
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
122
(
4
), pp.
579
587
.
26.
Barbieri
,
G.
, and
Zagami
,
S.
, 2000, “
Progettazione e Realizzazione di un Banco di Flussaggio Stazionario per Rilievi LDA su Teste di M. C.I.
,” (in Italian), National ATI Congress.
27.
Algieri
,
A.
,
Bova
,
S.
, and
De Bartolo
,
C.
, 2005, “
Experimental and Numerical Investigation on the Effects of the Seeding Properties on LDA Measurements
,”
ASME J. Fluids Eng.
0098-2202,
127
(
3
), pp.
514
522
.
28.
Algieri
,
A.
,
Amelio
,
M.
, and
Bova
,
S.
, 2001, “
Global and LDA Steady Flow Measurements in Two High-Performance I.C.E. Head Configurations
,”
5th International Conference on Internal Combustion Engines-ICE2001
, SAE-NA Paper No. 2001-01-20.
29.
Auriemma
,
M.
,
Caputo
,
G.
,
Corcione
,
F. E.
,
Valentino
,
G.
, and
Riganti
,
G.
, 2003, “
Fluid-Dynamic Analysis of the Intake System for a HDDI Diesel Engine by STAR-CD Code and LDA Technique
,” SAE Paper No. 2003-01-0002.
30.
Kang
,
K. Y.
, and
Reitz
,
R. D.
, 1999, “
The Effect of the Valve Alignment on Swirl Generation in a DI Diesel Engine
,”
Exp. Therm. Fluid Sci.
0894-1777,
20
, pp.
94
103
.
31.
Weclas
,
M.
,
Melling
,
A.
, and
Durst
,
F.
, 1995, “
Unsteady Intake Valve Gap Flow
,” SAE Paper No. 952477.
32.
Algieri
,
A.
,
Bova
,
S.
, and
De Bartolo
,
C.
, 2005, “
Global Flow Characterization of a Four Cylinder Spark Ignition Engine During the Intake Phase
,” SAE Paper No. 2005-24-075.
You do not currently have access to this content.