This paper presents an investigation of the degradation effects that gas and steam turbine cycles components have on combined cycle (CCGT) power plant performance. Gas turbine component degradation effects were assessed with TurboMatch, the Cranfield Gas Turbine simulation code. A new code was developed to assess bottoming cycle performance deterioration. The two codes were then joined to simulate the combined cycle performance deterioration as a whole unit. Areas examined were gas turbine compressor and turbine degradation, HRSG degradation, steam turbine degradation, condenser degradation, and increased gas turbine back pressure due to HRSG degradation. The procedure, assumptions made, and the results obtained are presented and discussed. The parameters that appear to have the greatest influence on degradation are the effects on the gas generator.
Skip Nav Destination
Article navigation
April 2004
Technical Papers
Degradation Effects on Combined Cycle Power Plant Performance—Part III: Gas and Steam Turbine Component Degradation Effects
A. I. Zwebek,
A. I. Zwebek
Department of Power Engineering and Propulsion, School of Engineering, Cranfield University, Bedford MK43 0AL, UK
Search for other works by this author on:
P. Pilidis
P. Pilidis
Department of Power Engineering and Propulsion, School of Engineering, Cranfield University, Bedford MK43 0AL, UK
Search for other works by this author on:
A. I. Zwebek
Department of Power Engineering and Propulsion, School of Engineering, Cranfield University, Bedford MK43 0AL, UK
P. Pilidis
Department of Power Engineering and Propulsion, School of Engineering, Cranfield University, Bedford MK43 0AL, UK
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Amsterdam, The Netherlands, June 3–6, 2002; Paper No. 2002-GT-30513. Manuscript received by IGTI, Dec. 2001, final revision, Mar. 2002. Associate Editor: E. Benvenuti.
J. Eng. Gas Turbines Power. Apr 2004, 126(2): 306-315 (10 pages)
Published Online: June 7, 2004
Article history
Received:
December 1, 2001
Revised:
March 1, 2002
Online:
June 7, 2004
Citation
Zwebek , A. I., and Pilidis, P. (June 7, 2004). "Degradation Effects on Combined Cycle Power Plant Performance—Part III: Gas and Steam Turbine Component Degradation Effects ." ASME. J. Eng. Gas Turbines Power. April 2004; 126(2): 306–315. https://doi.org/10.1115/1.1639007
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Degradation Effects on Combined Cycle Power Plant Performance—Part II: Steam Turbine Cycle Component Degradation Effects
J. Eng. Gas Turbines Power (July,2003)
Modeling the Performance Characteristics of Diesel Engine Based Combined-Cycle Power Plants—Part II: Results and Applications
J. Eng. Gas Turbines Power (January,2004)
Simulation of Producer Gas Fired Power Plants with Inlet Fog Cooling and Steam Injection
J. Eng. Gas Turbines Power (July,2007)
A Computational Model of a Combined Cycle Power Generation Unit
J. Energy Resour. Technol (September,2004)
Related Proceedings Papers
Related Chapters
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition
Introduction
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies