Sir Frank Whittle passed away on August 8, 1996, at the age of 89, in Maryland. His work in developing the turbojet can truly be said to represent one of the greatest mechanical engineering achievements in the last 70 years. The development of the turbojet demanded that Whittle face almost insurmountable technical and institutional challenges. The technical challenges included developing centrifugal compressor pressure ratios of 4:1 from the prevailing technology level of 2.5:1, increasing compressor efficiencies from 65 to 80 percent while designing for combustion intensities that were 10 times the prevailing state of the art in boiler technology. He was also responsible for utilizing a vortex turbine design approach. The institutional challenges that he faced included changing a paradigm on aircraft propulsion technology and nurturing Power Jets Ltd. to produce excellent engine designs with minimal resources in terms of money, technical manpower, and governmental support. It is the object of this paper to document the epic long-drawn-out struggle fought by Sir Frank against entrenched technical opinion, which ultimately resulted in the turbojet revolution. The technical aspects of his pioneering work with emphasis on the problems he encountered will also be discussed.
Skip Nav Destination
Article navigation
April 1998
Research Papers
The Development of the Whittle Turbojet
C. B. Meher-Homji
C. B. Meher-Homji
Bechtel Corporation, Houston, TX 77056-2166
Search for other works by this author on:
C. B. Meher-Homji
Bechtel Corporation, Houston, TX 77056-2166
J. Eng. Gas Turbines Power. Apr 1998, 120(2): 249-256 (8 pages)
Published Online: April 1, 1998
Article history
Received:
February 1, 1997
Online:
November 19, 2007
Article
Article discussed|
View article
Connected Content
Citation
Meher-Homji, C. B. (April 1, 1998). "The Development of the Whittle Turbojet." ASME. J. Eng. Gas Turbines Power. April 1998; 120(2): 249–256. https://doi.org/10.1115/1.2818112
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Active Flow Control in Circular and Transitioning S-duct Diffusers
J. Fluids Eng (November,2006)
Separation Control on a Very High Lift Low Pressure Turbine Airfoil Using Pulsed Vortex Generator Jets
J. Turbomach (October,2011)
Numerical Study of Vortex/Flame Interaction in Actively Forced Confined Non-Premixed Jets
J. Heat Transfer (May,2000)
Qualitative and Quantitative Comparison of Two Promising Oxy-Fuel Power Cycles for C O 2 Capture
J. Eng. Gas Turbines Power (May,2008)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Lay-Up and Start-Up Practices
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration