Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267]

Afzal, Noor

doi:10.1115/1.4004961

Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” []

Noor Afzal

Search for other works by this author on:

This Site

PubMed

Google Scholar

J. Fluids Eng. Oct 2011, 133(10): 107001 (1 pages)

https://doi.org/10.1115/1.4004961

Published Online: October 5, 2011

Introduction

1
Page: 1258: In friction factor relations 34, 35, 36, and 37, replace $δ$ by $D$ in first location, to read as
$\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{h}{3.7 D} \exp (- j \frac{5.66}{Re \sqrt{λ}} \frac{δ}{h})]$
34
$\frac{1}{\sqrt{λ}} = - 1.93 \log_{10} [\frac{1.90}{Re \sqrt{λ}} + \frac{h}{3.7 D} \exp (- j \frac{5.66}{Re \sqrt{λ}} \frac{δ}{h})]$
35
$\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{h}{3.7 D} \exp (- j \frac{12.91}{{Re}^{0.9}} \frac{δ}{h})]$
36
$\frac{1}{\sqrt{λ}} = - 1.932 \log_{10} [\frac{4.22}{{Re}^{0.9}} + \frac{h}{3.7 D} \exp (- j \frac{9.50}{{Re}^{0.9}} \frac{δ}{h})]$
37
2
Page 1259: In Table 1, replace $δ$ by $D$ in the second column, and its corresponding term in the third column. Also in the third column of Eqs. (3a) and (3b), the numerical values $0.754$ and $1.724$ are replaced by $0.88$ and $2.02$ ⁠, respectively. The corrected Table 1 is given below.

View Original Article

by American Society of Mechanical Engineers

Scale

Friction factor for fully rough pipes

Friction factor for transitional rough pipes implicit and approximate explicit expressions;

(j = 11)

Eq.

R_{q}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} (\frac{R_{q}}{0.7 D})

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{R_{q}}{0.7 D} \exp (- j \frac{1.062}{Re \sqrt{λ}} \frac{δ}{R_{q}})]

(1a)

h_{s} = 5.333 R_{q}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{R_{q}}{0.7 D} \exp (- j \frac{2.58}{{Re}^{0.9}} \frac{δ}{R_{q}})]

(1b)

R_{Z}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} (\frac{R_{Z}}{3 D})

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{R_{Z}}{3 D} \exp (- j \frac{4.55}{Re \sqrt{λ}} \frac{δ}{R_{Z}})]

(2a)

h_{s} = 1.244 R_{Z}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{R_{Z}}{3 D} \exp (- j \frac{10.41}{{Re}^{0.9}} \frac{δ}{R_{Z}})]

(2b)

R_{a}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} (\frac{R_{a}}{0.57 D})

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{R_{a}}{0.57 D} \exp (- j \frac{0.88}{Re \sqrt{λ}} \frac{δ}{R_{a}})]

(3a)

h_{s} = 6.45 R_{a}

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{R_{a}}{0.57 D} \exp (- j \frac{2.02}{{Re}^{0.9}} \frac{δ}{R_{a}})]

(3b)

R_{q} / H

\frac{1}{\sqrt{λ}} = - 2 \log_{10} (\frac{R_{q} / H}{0.5 D})

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{R_{q} / H}{0.5 D} \exp (- j \frac{0.754}{Re \sqrt{λ}} \frac{δ}{R_{q} / H})]

(4a)

h_{s} = 7.71 R_{q} / H

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{R_{q} / H}{0.5 D} \exp (- j \frac{1.724}{{Re}^{0.9}} \frac{δ}{R_{q} / H})]

(4b)

h

\frac{1}{\sqrt{λ}} = - 2 \log_{10} (\frac{h}{3.7 D})

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{h}{3.7 D} \exp (- j \frac{5.66}{Re \sqrt{λ}} \frac{δ}{h})]

(5a)

\frac{1}{\sqrt{λ}} = - 2 \log_{10} [\frac{5.74}{{Re}^{0.9}} + \frac{h}{3.7 D} \exp (- j \frac{12.91}{{Re}^{0.9}} \frac{δ}{h})]

(5b)

h

\frac{1}{\sqrt{λ}} = - 1.93 \log_{10} (\frac{h}{3.7 D})

\frac{1}{\sqrt{λ}} = - 1.93 \log_{10} [\frac{2.51}{Re \sqrt{λ}} + \frac{h}{3.7 D} \exp (- j \frac{5.66}{Re \sqrt{λ}} \frac{δ}{h})]

(6a)

\frac{1}{\sqrt{λ}} = - 1.93 \log_{10} [\frac{4.22}{{Re}^{0.9}} + \frac{h}{3.7 D} \exp (- j \frac{9.50}{{Re}^{0.9}} \frac{δ}{h})]

(6b)

Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267]

Introduction

Contents

Data & Figures

Supplements

References

Get Email Alerts

Cited By

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Erratum: “Friction factor directly from transitional roughness in a turbulent pipe flow” [ASME Trans. J. Fluid Eng., 2007, 129, pp. 1255–1267]

Introduction

Contents

Data & Figures

Supplements

References

Related

Get Email Alerts

Cited By

Related Articles

Related Proceedings Papers

Related Chapters

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only