We are comparing results of numerical simulations against high-speed simultaneous observations of cavitation and cavitation erosion. We performed fully compressible, cavitating flow simulations to resolve the formation of the shock waves at cloud collapse—these are believed to be directly related to the formation of the damage. Good agreements were noticed between calculations and tests. Two high pressure peaks were found during one cavitation cycle. One relates to the cavitation collapse and the other one corresponds to the cavitation shed off, both contributing to a distinctive stepwise erosion damage growth pattern. Additional, more precise, simulations with much shorter time step were performed to investigate the processes of cavitation collapse and shedding off in more detail. There the importance of small cavitation structures which collapse independently of the main cloud was found. The present work shows a great potential for future development of techniques for accurate predictions of cavitation erosion by numerical means only.
Skip Nav Destination
Article navigation
Research-Article
Combined Numerical and Experimental Investigation of the Cavitation Erosion Process
Wang Jian,
Wang Jian
Research Center of Fluid Machinery
Engineering and Technology,
e-mail: kin.jian.wang@gmail.com
Engineering and Technology,
Jiangsu University
,Zhenjiang 202013
, China
e-mail: kin.jian.wang@gmail.com
Search for other works by this author on:
Martin Petkovšek,
Martin Petkovšek
Laboratory for Water and Turbine Machines,
e-mail: martin.petkovsek@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: martin.petkovsek@fs.uni-lj.si
Search for other works by this author on:
Liu Houlin,
Liu Houlin
Research Center of Fluid Machinery
Engineering and Technology,
e-mail: liuhoulin@ujs.edu.cn
Engineering and Technology,
Jiangsu University
,Zhenjiang 202013
, China
e-mail: liuhoulin@ujs.edu.cn
Search for other works by this author on:
Brane Širok,
Brane Širok
Laboratory for Water and Turbine Machines,
e-mail: brane.sirok@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: brane.sirok@fs.uni-lj.si
Search for other works by this author on:
Matevž Dular
Matevž Dular
1
Laboratory for Water and Turbine Machines,
e-mail: matevz.dular@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: matevz.dular@fs.uni-lj.si
1Corresponding author.
Search for other works by this author on:
Wang Jian
Research Center of Fluid Machinery
Engineering and Technology,
e-mail: kin.jian.wang@gmail.com
Engineering and Technology,
Jiangsu University
,Zhenjiang 202013
, China
e-mail: kin.jian.wang@gmail.com
Martin Petkovšek
Laboratory for Water and Turbine Machines,
e-mail: martin.petkovsek@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: martin.petkovsek@fs.uni-lj.si
Liu Houlin
Research Center of Fluid Machinery
Engineering and Technology,
e-mail: liuhoulin@ujs.edu.cn
Engineering and Technology,
Jiangsu University
,Zhenjiang 202013
, China
e-mail: liuhoulin@ujs.edu.cn
Brane Širok
Laboratory for Water and Turbine Machines,
e-mail: brane.sirok@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: brane.sirok@fs.uni-lj.si
Matevž Dular
Laboratory for Water and Turbine Machines,
e-mail: matevz.dular@fs.uni-lj.si
University of Ljubljana
,Askerceva 6
,Ljubljana 1000
, Slovenia
e-mail: matevz.dular@fs.uni-lj.si
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received May 30, 2014; final manuscript received January 7, 2015; published online February 9, 2015. Assoc. Editor: Olivier Coutier-Delgosha.
J. Fluids Eng. May 2015, 137(5): 051302 (9 pages)
Published Online: May 1, 2015
Article history
Received:
May 30, 2014
Revision Received:
January 7, 2015
Online:
February 9, 2015
Citation
Jian, W., Petkovšek, M., Houlin, L., Širok, B., and Dular, M. (May 1, 2015). "Combined Numerical and Experimental Investigation of the Cavitation Erosion Process." ASME. J. Fluids Eng. May 2015; 137(5): 051302. https://doi.org/10.1115/1.4029533
Download citation file:
Get Email Alerts
A Wind Speed Forecasting Method Using Gaussian Process Regression Model Under Data Uncertainty
J. Fluids Eng (March 2025)
Design Process for Scaled Model Wind Turbines Using Field Measurements
J. Fluids Eng (March 2025)
Related Articles
Assessment of Cavitation Erosion With a URANS Method
J. Fluids Eng (April,2014)
Cloud Cavitating Flow Over a Submerged Axisymmetric Projectile and Comparison Between Two-Dimensional RANS and Three-Dimensional Large-Eddy Simulation Methods
J. Fluids Eng (June,2016)
An Improved Eulerian–Lagrangian Method Combined With Ductile Material Model for Cavitation Erosion Assessment
J. Fluids Eng (May,2025)
On the Applicability of Cavitation Erosion Risk Models With a URANS Solver
J. Fluids Eng (October,2019)
Related Proceedings Papers
Related Chapters
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3