Topics: Finite element methods , Heat conduction , Metals , Modeling , Simulation , Temperature , Chain , Finite element analysis , Thermal conductivity , Clocks

An Investigation Into the Effect of the PCB Motion on the Dynamic Response of MEMS Devices Under Mechanical Shock Loads

Fadi Alsaleem, Mohammad I. Younis, Ronald Miles

J. Electron. Packag. September 2008, 130(3): 031002. doi: https://doi.org/10.1115/1.2957319

Abstract

View articletitled, An Investigation Into the Effect of the PCB Motion on the Dynamic Response of MEMS Devices Under Mechanical Shock Loads

Open the PDF for in another window

Topics: Microelectromechanical systems , Shock (Mechanics) , Stress , Manufacturing , Diaphragms (Mechanical devices) , Diaphragms (Structural)

Thermal Design Methodology for an Embedded Power Electronic Module Using Double-Sided Microchannel Cooling

Manu Mital, Elaine P. Scott

J. Electron. Packag. September 2008, 130(3): 031003. doi: https://doi.org/10.1115/1.2957320

Abstract

View articletitled, Thermal Design Methodology for an Embedded Power Electronic Module Using Double-Sided Microchannel Cooling

Open the PDF for in another window

Topics: Cooling , Design , Microchannels , Pressure drop , Heat sinks , Heat , Flow (Dynamics) , Copper , Coolants

Hierarchal Modeling of Creep Behavior of SnAg Solder Alloys

Min Pei, Jianmin Qu

J. Electron. Packag. September 2008, 130(3): 031004. doi: https://doi.org/10.1115/1.2957321

Abstract

View articletitled, Hierarchal Modeling of Creep Behavior of SnAg Solder Alloys

Open the PDF for in another window

Topics: Alloys , Creep , Solders , Tin

A High Precision Experimental Method to Determine Poisson’s Ratios of Encapsulant Gels

David A. Dillard, Alok Mallick, Donatus C. Ohanehi, Jang-Horng Yu, Didier R. Lefebvre

J. Electron. Packag. September 2008, 130(3): 031006. doi: https://doi.org/10.1115/1.2957326

Abstract

View articletitled, A High Precision Experimental Method to Determine Poisson’s Ratios of Encapsulant Gels

Open the PDF for in another window

Topics: Cylinders , Elastomers , High pressure (Physics) , Poisson ratio , Pressure , Casting , Pressure sensors , Deformation , Stress

Analysis of Solderless Press-Fit Interconnections During the Assembly Process

Hironori Tohmyoh, Kiichiro Yamanobe, Masumi Saka, Jiro Utsunomiya, Takeshi Nakamura, Yoshikatsu Nakano

J. Electron. Packag. September 2008, 130(3): 031007. doi: https://doi.org/10.1115/1.2957330

Abstract

View articletitled, Analysis of Solderless Press-Fit Interconnections During the Assembly Process

Open the PDF for in another window

Topics: Finite element analysis , Manufacturing , Pins (Engineering) , Press fits , Stress , Friction

Current Crowding and its Effects on Electromigration and Interfacial Reaction in Lead-Free Solder Joints

Hao Lu, Chun Yu, Peilin Li, Junmei Chen

J. Electron. Packag. September 2008, 130(3): 031008. doi: https://doi.org/10.1115/1.2957322

Abstract

View articletitled, Current Crowding and its Effects on Electromigration and Interfacial Reaction in Lead-Free Solder Joints

Open the PDF for in another window

Topics: Current density , Electrodiffusion , Finite element analysis , Lead-free solders , Solder joints , Solders , Tin

Quality Inspection of Flip Chip Solder Bumps Using Integrated Analytical, Numerical, and Experimental Modal Analyses

Jin Yang, I. Charles Ume

J. Electron. Packag. September 2008, 130(3): 031009. doi: https://doi.org/10.1115/1.2957328

Abstract

View articletitled, Quality Inspection of Flip Chip Solder Bumps Using Integrated Analytical, Numerical, and Experimental Modal Analyses

Open the PDF for in another window

Topics: Flip-chip , Flip-chip devices , Inspection , Lasers , Modal analysis , Solders , Ultrasound , Mode shapes

Optimization of Pin-Fin Heat Sinks in Bypass Flow Using Entropy Generation Minimization Method

W. A. Khan, J. R. Culham, M. M. Yovanovich

J. Electron. Packag. September 2008, 130(3): 031010. doi: https://doi.org/10.1115/1.2965209

Abstract

View articletitled, Optimization of Pin-Fin Heat Sinks in Bypass Flow Using Entropy Generation Minimization Method

Open the PDF for in another window

Topics: Entropy , Flow (Dynamics) , Heat sinks , Optimization , Pressure drop , Heat transfer , Clearances (Engineering)

Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels

E. Elsaadawy, H. Mortazavi, M. S. Hamed

J. Electron. Packag. September 2008, 130(3): 031011. doi: https://doi.org/10.1115/1.2912182

Abstract

View articletitled, Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels

Open the PDF for in another window

Topics: Turbulence , Forced convection , Shear stress

Research Papers

Underfill Filler Settling Effect on the Die Backside Interfacial Stresses of Flip Chip Packages

Cheng-fu Chen, Pramod C. Karulkar

J. Electron. Packag. September 2008, 130(3): 031005. doi: https://doi.org/10.1115/1.2957324

Abstract

View articletitled, Underfill Filler Settling Effect on the Die Backside Interfacial Stresses of Flip Chip Packages

Open the PDF for in another window

Topics: Fillers (Materials) , Stress , Particulate matter , Flip-chip packages , Flip-chip devices

A Convection/Radiation Temperature Control System for High Power Density Electronic Device Testing

Matthew Sweetland, John H. Lienhard, V, Alexander H. Slocum

J. Electron. Packag. September 2008, 130(3): 031012. doi: https://doi.org/10.1115/1.2966437

Abstract

View articletitled, A Convection/Radiation Temperature Control System for High Power Density Electronic Device Testing

Open the PDF for in another window

Topics: Convection , Cooling , Lasers , Nozzles , Radiation (Physics) , Temperature , Temperature control , Testing , Manifolds , Pressure

Technology Reviews

Multidisciplinary Design and Optimization Methodologies in Electronics Packaging: State-of-the-Art Review

Hamid Hadim, Tohru Suwa

J. Electron. Packag. September 2008, 130(3): 034001. doi: https://doi.org/10.1115/1.2957459

Abstract

View articletitled, Multidisciplinary Design and Optimization Methodologies in Electronics Packaging: State-of-the-Art Review

Open the PDF for in another window

Topics: Design , Electronic packaging , Optimization , Optimization algorithms

Technical Briefs

A Numerical Study of a Heat Sink Fin Under a Laminar Impinging Jet

Z. Q. Lou, C. Yap, A. S. Mujumdar

J. Electron. Packag. September 2008, 130(3): 034501. doi: https://doi.org/10.1115/1.2809447

Abstract

View articletitled, A Numerical Study of a Heat Sink Fin Under a Laminar Impinging Jet

Open the PDF for in another window

Topics: Heat sinks , Heat transfer , Pressure drop , Reynolds number , Thermal resistance , Fluids , Fins

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Wideband Equivalent Circuit Modeling and Parameter Extraction Method for Through Via in Ceramic Package Substrate

J. Electron. Packag

Electrochemical Linked to Mechanical Simulation for an Assessment of State-Of-Health of Thin-flexible Li-ion Batteries on Dynamic Flexing and Calendar Aging

J. Electron. Packag

Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability

J. Electron. Packag

Understanding the Impact of Data Center Liquid Cooling on Energy and Performance of Machine Learning and Artificial Intelligence Workloads

J. Electron. Packag

Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?

J. Electron. Packag

Research Papers

A Compact Approach to On-Chip Interconnect Heat Conduction Modeling Using the Finite Element Method

An Investigation Into the Effect of the PCB Motion on the Dynamic Response of MEMS Devices Under Mechanical Shock Loads

Thermal Design Methodology for an Embedded Power Electronic Module Using Double-Sided Microchannel Cooling

Hierarchal Modeling of Creep Behavior of SnAg Solder Alloys

A High Precision Experimental Method to Determine Poisson’s Ratios of Encapsulant Gels

Analysis of Solderless Press-Fit Interconnections During the Assembly Process

Current Crowding and its Effects on Electromigration and Interfacial Reaction in Lead-Free Solder Joints

Quality Inspection of Flip Chip Solder Bumps Using Integrated Analytical, Numerical, and Experimental Modal Analyses

Optimization of Pin-Fin Heat Sinks in Bypass Flow Using Entropy Generation Minimization Method

Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels

Research Papers

Underfill Filler Settling Effect on the Die Backside Interfacial Stresses of Flip Chip Packages

A Convection/Radiation Temperature Control System for High Power Density Electronic Device Testing

Technology Reviews

Multidisciplinary Design and Optimization Methodologies in Electronics Packaging: State-of-the-Art Review

Technical Briefs

A Numerical Study of a Heat Sink Fin Under a Laminar Impinging Jet

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Research Papers

Technology Reviews

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only