Skip Nav Destination
Issues
February 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
In Situ Optical Diagnostics for Measurements of Water Vapor Partial Pressure in a PEM Fuel Cell
J. Fuel Cell Sci. Technol. February 2006, 3(1): 1–7.
doi: https://doi.org/10.1115/1.2133799
Topics:
Fuel cells
,
Lasers
,
Pressure
,
Proton exchange membrane fuel cells
,
Temperature
,
Water
,
Water vapor
,
Absorption
,
Wavelength
,
Laser beams
Design and Performance Analysis of Innovative Bipolar Direct Methanol Fuel Cell Stacks with 2D Planar Configuration
J. Fuel Cell Sci. Technol. February 2006, 3(1): 8–12.
doi: https://doi.org/10.1115/1.2133800
Topics:
Design
,
Direct methanol fuel cells
,
Graphite
,
Methanol
,
Stack design
,
Temperature
,
Plates (structures)
,
Manufacturing
,
Membranes
,
Flow (Dynamics)
Optical Measurement Technique of Water Contents in Polymer Membrane for PEFCs
J. Fuel Cell Sci. Technol. February 2006, 3(1): 13–17.
doi: https://doi.org/10.1115/1.2133801
Topics:
Membranes
,
Optical measurement
,
Polymers
,
Water
,
Transients (Dynamics)
,
Diffusion (Physics)
,
Calibration
Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results
J. Fuel Cell Sci. Technol. February 2006, 3(1): 18–25.
doi: https://doi.org/10.1115/1.2133802
Topics:
Fuel cells
,
Gas turbines
,
Solid oxide fuel cells
,
Simulation
,
Temperature
Discussion and Analysis of Flue Gas Utilization in a Phosphoric Acid Fuel Cell Engine During Idle Operation
J. Fuel Cell Sci. Technol. February 2006, 3(1): 26–32.
doi: https://doi.org/10.1115/1.2133803
Topics:
Engines
,
Flow (Dynamics)
,
Flue gases
,
Fuel cells
,
Fuels
,
Heat
,
Hydrogen
,
Methanol
,
Phosphoric acid fuel cells
,
Catalysts
Comprehensive Numerical Modeling and Analysis of a Cell-Based Indirect Internal Reforming Tubular SOFC
J. Fuel Cell Sci. Technol. February 2006, 3(1): 33–44.
doi: https://doi.org/10.1115/1.2133804
Effects of Inlet Mass Flow Distribution and Magnitude on Reactant Distribution for PEM Fuel Cells
J. Fuel Cell Sci. Technol. February 2006, 3(1): 45–50.
doi: https://doi.org/10.1115/1.2134736
Multi-Resolution PEM Fuel Cell Model Validation and Accuracy Analysis
J. Fuel Cell Sci. Technol. February 2006, 3(1): 51–61.
doi: https://doi.org/10.1115/1.2134737
Modeling Radiation Heat Transfer With Participating Media in Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. February 2006, 3(1): 62–67.
doi: https://doi.org/10.1115/1.2134738
Topics:
Radiation (Physics)
,
Solid oxide fuel cells
,
Temperature
,
Heat transfer
,
Modeling
,
Geometry
Changes of Internal Stress in Solid-Oxide Fuel Cell During Red-Ox Cycle Evaluated by In Situ Measurement With Synchrotron Radiation
Hirofumi Sumi, Kenji Ukai, Misuzu Yokoyama, Yasunobu Mizutani, Yoshihisa Doi, Shutaro Machiya, Yoshiaki Akiniwa, Keisuke Tanaka
J. Fuel Cell Sci. Technol. February 2006, 3(1): 68–74.
doi: https://doi.org/10.1115/1.2134739
Topics:
Cycles
,
Solid oxide fuel cells
,
Stress
,
Synchrotron radiation
,
Thermal expansion
,
Temperature
,
Anodes
A Technological Solution for an Everywhere Energy Supply With Sun, Hydrogen, and Fuel Cells
J. Fuel Cell Sci. Technol. February 2006, 3(1): 75–82.
doi: https://doi.org/10.1115/1.2134740
Topics:
Fuel cells
,
Hydrogen
,
Metals
,
Hydrogen storage
,
Solar energy
,
Pressure
,
Integrated systems
Mixed-Fuels Fuel Cell Running on Methane-Air Mixture
J. Fuel Cell Sci. Technol. February 2006, 3(1): 83–86.
doi: https://doi.org/10.1115/1.2134741
Topics:
Anodes
,
Carbon
,
Coating processes
,
Coatings
,
Fuel cells
,
Fuels
,
Methane
,
Sol-gel processing
,
Solid oxide fuel cells
,
Electrolytes
Email alerts
RSS Feeds
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
