Solid oxide fuel cell (SOFC) technology has been shown to be viable, but its profitability has not yet been seen. To achieve a high net efficiency at a low net cost, a detailed understanding of the transport processes both inside and outside of the SOFC stack is required. Of particular significance is an accurate determination of the temperature distribution because material properties, chemical kinetics, and transport properties depend heavily on the temperature. Effective utilization of the heat can lead to a substantial increase in overall system efficiency and decrease in operating cost. Despite the extreme importance in accurately predicting temperature, the SOFC modeling community appears to be uncertain about the importance of incorporating radiation into their models. Although some models have included it, the majority of models ignore radiative heat transfer. SOFCs operate at temperatures around or above 1200 K, where radiation effects can be significant. In order to correctly predict the radiation heat transfer, participating gases must also be included. Water vapor and carbon dioxide can absorb, emit, and scatter radiation, and are present at the anode in high concentrations. This paper presents a simple thermal transport model for analyzing heat transfer and improving thermal management within planar SOFCs. The model was implemented using a commercial computational fluid dynamic code and includes conduction, convection, and radiation in a participating media. It is clear from this study that radiation must be considered when modeling solid oxide fuel cells. The effect of participating media radiation was shown to be minimal in this geometry, but it is likely to be more important in tubular geometries.
Skip Nav Destination
Article navigation
February 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Modeling Radiation Heat Transfer With Participating Media in Solid Oxide Fuel Cells
J. D. J. VanderSteen,
J. D. J. VanderSteen
Department of Mechanical and Materials Engineering, Fuel Cell Research Centre (FCRC),
Queen’s University
, Kingston, Ontario, Canada
Search for other works by this author on:
J. G. Pharoah
J. G. Pharoah
Department of Mechanical and Materials Engineering, Fuel Cell Research Centre (FCRC),
Queen’s University
, Kingston, Ontario, Canada
Search for other works by this author on:
J. D. J. VanderSteen
Department of Mechanical and Materials Engineering, Fuel Cell Research Centre (FCRC),
Queen’s University
, Kingston, Ontario, Canada
J. G. Pharoah
Department of Mechanical and Materials Engineering, Fuel Cell Research Centre (FCRC),
Queen’s University
, Kingston, Ontario, CanadaJ. Fuel Cell Sci. Technol. Feb 2006, 3(1): 62-67 (6 pages)
Published Online: July 18, 2005
Article history
Received:
June 9, 2005
Revised:
July 18, 2005
Citation
VanderSteen, J. D. J., and Pharoah, J. G. (July 18, 2005). "Modeling Radiation Heat Transfer With Participating Media in Solid Oxide Fuel Cells." ASME. J. Fuel Cell Sci. Technol. February 2006; 3(1): 62–67. https://doi.org/10.1115/1.2134738
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Monte Carlo Radiative Transfer Modeling of a Solar Chemical Reactor for The Co-Production of Zinc and Syngas
J. Sol. Energy Eng (February,2005)
Implementing Thermal Management Modeling Into SOFC System Level Design
J. Fuel Cell Sci. Technol (April,2011)
CFD Modeling: Different Kinetic Approaches for Internal Reforming Reactions in an Anode-Supported SOFC
J. Fuel Cell Sci. Technol (June,2011)
A Study of Temperature Distribution Across a Solid Oxide Fuel Cell Stack
J. Fuel Cell Sci. Technol (February,2010)
Related Proceedings Papers
Related Chapters
Radiation
Thermal Management of Microelectronic Equipment
Radiation
Thermal Management of Microelectronic Equipment, Second Edition
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life