Abstract
The velocity field control of robot manipulators is addressed in this paper. The proposed algorithm has a hierarchical structure based on a velocity field kinematic control scheme for joint velocity resolution and an inner loop of joint velocity control that uses an observer for friction compensation. Experiments on a two degrees-of-freedom direct-drive arm illustrate the performance of the proposed controller.
Issue Section:
Technical Briefs
1.
Canudas de Wit
, C.
, Siciliano
, B.
, and Bastin
, G.
, 1996, in Theory of Robot Control
, Springer-Verlag
, London
.2.
Li
, P. Y.
, and Horowitz
, R.
, 1999, “Passive Velocity Field Control of Mechanical Manipulators
,” IEEE Trans. Rob. Autom.
1042-296X, 15
, pp. 751
–763
.3.
Li
, P. Y.
, and Horowitz
, R.
, 2001, “Passive Velocity Field Control (PVFC): Part I-Geometry and Robustness
,” IEEE Trans. Autom. Control
0018-9286, 46
, pp. 1346
–1359
.4.
Moreno
, J.
, and Kelly
, R.
, 2002, “On Manipulator Control Via Velocity Fields
,” Proc. 15th IFAC World Congress
, Barcelona
, Spain
.5.
Murray
, R. M.
, Li
, Z.
, and Sastry
, S. S.
, 1994, A Mathematical Introduction to Robotic Manipulation
, CRC Press
, Boca Raton, FL
.6.
Li
, P. Y.
, 1999. “Coordinated Contour Following Control for Machining Operations—A Survey
,” Proc. of the American Control Conference
, San Diego
, CA
, pp. 4543
–4547
.7.
Siciliano
, B.
, 1990, “Kinematic Control of Redundant Robot Manipulators: A Tutorial
,” J. Intell. Robotic Syst.
0921-0296, 3
, pp. 201
–212
.8.
Dahl
, P. R.
, 1976, “Solid Friction Damping of Mechanical Vibrations
,” AIAA J.
0001-1452, 14
, pp. 1675
–1682
.9.
Barabanov
, N.
, and Ortega
, R.
, 2000, “Necessary and Sufficient Conditions for Passivity of the LuGre Friction Model
,” IEEE Trans. Autom. Control
0018-9286, 45
, pp. 830
–832
.10.
Slotine
, J.
, and Li
, W.
, 1988, “Adaptive Manipulator Control: A Case Study
,” IEEE Trans. Autom. Control
0018-9286, 33
, pp. 995
–1003
.11.
Moreno
, J.
, Kelly
, R.
, and Campa
, R.
, 2003, “Manipulator Velocity Control Using Friction Compensation
,” IEE Proc.: Control Theory Appl.
1350-2379, 150
, pp. 119
–126
.12.
Spong
, M. W.
, Ortega
, R.
, and Kelly
, R.
, 1990, “Comments on ‘Adaptive Manipulator Control: A Case Study’
,” IEEE Trans. Autom. Control
0018-9286, 35
, pp. 761
–762
.13.
Vidyasagar
, M.
, 1993, Nonlinear Systems Analysis
, Prentice-Hall
, Englewood Cliffs, NJ
.14.
Chiu
, G. T.-C.
, and Tomizuka
, M.
, 2001, “Contouring Control of Machine Tool Feed Drive Systems: A Task Coordinate Frame Approach
,” IEEE Trans. Control Syst. Technol.
1063-6536, 9
, pp. 130
–131
.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.