This research studies the dynamics and motion control of a biped walking robot with seven degrees of freedom. The main features of the biped robot include variable length legs and a translatable balance weight in the body. The statically stable walking of the biped robot is implemented by maintaining the center-of-gravity (cg) inside the convex region of the supporting foot/feet during both single-support and double-support phases. The dynamically stable walking of the biped robot is realized by maintaining the zero moment point (ZMP), which is the virtual total ground reaction point, within the region of the supporting foot during the single-support phases. An implementation of a prototype biped BR-1 and its experimental walking test results are described. The biped robot is able to walk on an even floor both statically and dynamically. On a flat plane, the biped can walk with a speed of 8 cm/second statically, and 20 cm/second dynamically.
Skip Nav Destination
Article navigation
December 1996
Technical Papers
The Dynamics and Control of a Biped Walking Robot With Seven Degrees of Freedom
Ching-Long Shih
Ching-Long Shih
Department of Electrical Engineering, National Taiwan Institute of Technology, No. 43, Section 4, Keelung Road, Taipei, Taiwan 106
Search for other works by this author on:
Ching-Long Shih
Department of Electrical Engineering, National Taiwan Institute of Technology, No. 43, Section 4, Keelung Road, Taipei, Taiwan 106
J. Dyn. Sys., Meas., Control. Dec 1996, 118(4): 683-690 (8 pages)
Published Online: December 1, 1996
Article history
Received:
July 11, 1995
Online:
December 3, 2007
Citation
Shih, C. (December 1, 1996). "The Dynamics and Control of a Biped Walking Robot With Seven Degrees of Freedom." ASME. J. Dyn. Sys., Meas., Control. December 1996; 118(4): 683–690. https://doi.org/10.1115/1.2802343
Download citation file:
Get Email Alerts
Design of Attack Resistant Robust Control Based on Intermediate Estimator Approach for Offshore Steel Jacket Structures
J. Dyn. Sys., Meas., Control (September 2025)
Associate Editor's Recognition
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
Design of a Novel Flexible Robotic Laparoscope Using a Two Degrees-of-Freedom Cable-Driven Continuum Mechanism With Major Arc Notches
J. Mechanisms Robotics (December,2023)
Real-Time Manipulation of a Hybrid Serial-and-Parallel-Driven Redundant Industrial Manipulator
J. Dyn. Sys., Meas., Control (December,1994)
A Gauge-Invariant Formulation for Constrained Mechanical Systems Using Square-Root Factorization and Unitary Transformation
J. Comput. Nonlinear Dynam (July,2009)
Actuation and Motion Control of Flexible Robots: Small Deformation Problem
J. Mechanisms Robotics (February,2022)
Related Proceedings Papers
Related Chapters
Time-Varying Coefficient Aided MM Scheme
Robot Manipulator Redundancy Resolution
A Robot Arm Prototype — Software
International Conference on Measurement and Control Engineering 2nd (ICMCE 2011)
Practical Applications
Robust Control: Youla Parameterization Approach