This paper describes models of dynamics for articulated vehicles (tractor with a semitrailer and a tractor with a trailer). The models are obtained by using joint coordinates and homogenous transformations. Yawing velocities of the vehicle units have been measured during a sharp turn maneuver. The results of experimental measurements are then used to calibrate the mathematical models, which means the parameters of tires for the Dugoff–Uffelman model are chosen in such a way that the results of calculations and measurements are compatible. In order to solve this problem, an optimization method is used. Satisfactory results have been achieved and they are presented in this paper. Further, the model calibrated is used to analyze how the friction in the connections between the tractor and semitrailer, as well as between the dolly and the trailer, influences the motion of the vehicle.
Skip Nav Destination
Article navigation
Research-Article
Calibration of an Articulated Vehicle Model and Analysis of Friction Model in the Connection Between Two Vehicle Units
Wojciech Stanisław
Wojciech Stanisław
Search for other works by this author on:
Adamiec-Wójcik Iwona
Drąg Łukasz
Grzegożek Witold
Wojciech Stanisław
Contributed by the Design Engineering Division of ASME for publication in the JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS. Manuscript received September 10, 2018; final manuscript received January 13, 2019; published online March 14, 2019. Assoc. Editor: Corina Sandu.
J. Comput. Nonlinear Dynam. May 2019, 14(5): 051008 (12 pages)
Published Online: March 14, 2019
Article history
Received:
September 10, 2018
Revised:
January 13, 2019
Citation
Iwona, A., Łukasz, D., Witold, G., and Stanisław, W. (March 14, 2019). "Calibration of an Articulated Vehicle Model and Analysis of Friction Model in the Connection Between Two Vehicle Units." ASME. J. Comput. Nonlinear Dynam. May 2019; 14(5): 051008. https://doi.org/10.1115/1.4042638
Download citation file:
211
Views
Get Email Alerts
Cited By
Reviewer's Recognition
J. Comput. Nonlinear Dynam (May 2025)
The Bouc-Wen Model for Binary Direct Collinear Collisions of Convex Viscoplastic Bodies
J. Comput. Nonlinear Dynam
Related Articles
Estimation of the Maximum Tire-Road Friction Coefficient
J. Dyn. Sys., Meas., Control (December,2003)
On the Beneficial Effects of Anti-Squat in Rear Suspension Design of a Drag Racing Motorcycle
J. Mech. Des (March,2002)
Fault-Tolerant Control for Electric Ground Vehicles With Independently-Actuated In-Wheel Motors
J. Dyn. Sys., Meas., Control (March,2012)
Investigation of Tyre Pattern Effect on the Aerodynamics of a Passenger Vehicle
J. Fluids Eng (November,2022)
Related Proceedings Papers
Related Chapters
Rationale for Human-Powered Vehicle Design and Use
Design of Human Powered Vehicles
Manufacturing Processes and Materials
Design of Human Powered Vehicles
Roll Fatigue Tests of Forged ZK60A-T5 Magnesium and 2014-T6 Aluminum Wheels
Structural Fatigue in Aircraft