Thrombosis and thromboembolization remain large obstacles in the design of cardiovascular devices. In this study, the temporal behavior of thrombus size within a backward-facing step (BFS) model is investigated, as this geometry can mimic the flow separation which has been found to contribute to thrombosis in cardiac devices. Magnetic resonance imaging (MRI) is used to quantify thrombus size and collect topographic data of thrombi formed by circulating bovine blood through a BFS model for times ranging between 10 and 90 min at a constant upstream Reynolds number of 490. Thrombus height, length, exposed surface area, and volume are measured, and asymptotic behavior is observed for each as the blood circulation time is increased. Velocity patterns near, and wall shear stress (WSS) distributions on, the exposed thrombus surfaces are calculated using computational fluid dynamics (CFD). Both the mean and maximum WSS on the exposed thrombus surfaces are much more dependent on thrombus topography than thrombus size, and the best predictors for asymptotic thrombus length and volume are the reattachment length and volume of reversed flow, respectively, from the region of separated flow downstream of the BFS.
Skip Nav Destination
Article navigation
July 2014
Research-Article
In Vitro Quantification of Time Dependent Thrombus Size Using Magnetic Resonance Imaging and Computational Simulations of Thrombus Surface Shear Stresses
Joshua O. Taylor,
Joshua O. Taylor
Department of Bioengineering,
The Pennsylvania State University,
The Pennsylvania State University,
University Park
, PA 16802
;Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Search for other works by this author on:
Kory P. Witmer,
Kory P. Witmer
Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Search for other works by this author on:
Thomas Neuberger,
Thomas Neuberger
Huck Institutes of the Life Sciences,
The Pennsylvania State University
,University Park, PA 16802
;Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Search for other works by this author on:
Brent A. Craven,
Brent A. Craven
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
;Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Search for other works by this author on:
Richard S. Meyer,
Richard S. Meyer
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Search for other works by this author on:
Steven Deutsch,
Steven Deutsch
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Search for other works by this author on:
Keefe B. Manning
Keefe B. Manning
1
Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
;1Corresponding author.
Search for other works by this author on:
Joshua O. Taylor
Department of Bioengineering,
The Pennsylvania State University,
The Pennsylvania State University,
University Park
, PA 16802
;Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Kory P. Witmer
Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Thomas Neuberger
Huck Institutes of the Life Sciences,
The Pennsylvania State University
,University Park, PA 16802
;Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Brent A. Craven
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
;Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
Richard S. Meyer
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Steven Deutsch
Applied Research Laboratory,
The Pennsylvania State University
,State College, PA 16803
Keefe B. Manning
Department of Bioengineering,
The Pennsylvania State University
,University Park, PA 16802
;
1Corresponding author.
Manuscript received November 12, 2013; final manuscript received April 25, 2014; accepted manuscript posted May 8, 2014; published online May 23, 2014. Assoc. Editor: Ender A. Finol.
J Biomech Eng. Jul 2014, 136(7): 071012 (11 pages)
Published Online: May 23, 2014
Article history
Received:
November 12, 2013
Revision Received:
April 25, 2014
Accepted:
May 8, 2014
Citation
Taylor, J. O., Witmer, K. P., Neuberger, T., Craven, B. A., Meyer, R. S., Deutsch, S., and Manning, K. B. (May 23, 2014). "In Vitro Quantification of Time Dependent Thrombus Size Using Magnetic Resonance Imaging and Computational Simulations of Thrombus Surface Shear Stresses." ASME. J Biomech Eng. July 2014; 136(7): 071012. https://doi.org/10.1115/1.4027613
Download citation file:
Get Email Alerts
How Irregular Geometry and Flow Waveform Affect Pulsating Arterial Mass Transfer
J Biomech Eng (December 2024)
Phenomenological Muscle Constitutive Model With Actin–Titin Binding for Simulating Active Stretching
J Biomech Eng (January 2025)
Image-Based Estimation of Left Ventricular Myocardial Stiffness
J Biomech Eng (January 2025)
Related Articles
Influence of Hemodialysis Catheter Insertion on Hemodynamics in the Central Veins
J Biomech Eng (September,2020)
Association Between Resistance to Cerebrospinal Fluid Flow Near the Foramen Magnum and Cough-Associated Headache in Adult Chiari Malformation Type I
J Biomech Eng (May,2021)
Influence of the Anatomical Structure on the Hemodynamics of Iliac Vein Stenosis
J Biomech Eng (January,2023)
Related Proceedings Papers
Related Chapters
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
List of Commercial Codes
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Mri Image Segmentation Based on FCM Clustering Using an Adaptive Threshold Algorithm
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)