Classical marker-based roentgen stereophotogrammetric analysis (RSA) is an accurate method of measuring in vivo implant migration. A disadvantage of the method is the necessity of placing tantalum markers on the implant, which constitutes additional manufacturing and certification effort. Model-based RSA (MBRSA) is a method by which pose-estimation of geometric surface-models of the implant is used to detect implant migration. The placement of prosthesis markers is thus no longer necessary. The accuracy of the pose-estimation algorithms used depends on the geometry of the prosthesis as well as the accuracy of the surface models used. The goal of this study was thus to evaluate the experimental accuracy and precision of the MBRSA method for four different, but typical prosthesis geometries, that are commonly implanted. Is there a relationship existing between the accuracy of MBRSA and prosthesis geometries? Four different prosthesis geometries were investigated: one femoral and one tibial total knee arthroplasty (TKA) component and two different femoral stem total hip arthroplasty (THA) components. An experimental phantom model was used to simulate two different implant migration protocols, whereby the implant was moved relative to the surrounding bone (relative prosthesis-bone motion (RM)), or, similar to the double-repeated measures performed to assess accuracy clinically, both the prosthesis and the surrounding bone model (zero relative prosthesis-bone motion (ZRM)) were moved. Motions were performed about three translational and three rotational axes, respectively. The maximum 95% confidence interval (CI) for MBRSA of all four prosthesis investigated was better than −0.034 to 0.107 mm for in-plane and −0.217 to 0.069 mm for out-of-plane translation, and from −0.038 deg to 0.162 deg for in-plane and from −1.316 deg to 0.071 deg for out-of-plane rotation, with no clear differences between the ZRM and RM protocols observed. Accuracy in translation was similar between TKA and THA components, whereas rotational accuracy about the long axis of the hip stem THA components was worse than the TKA components. The data suggest that accuracy and precision of MBRSA seem to be equivalent to the classical marker-based RSA method, at least for the nonsymmetric implant geometries investigated in this study. The model-based method thus allows the accurate measurement of implant migration without requiring prosthesis markers, and thus presents new opportunities for measuring implant migration where financial or geometric considerations of marker placement have thus far been prohibitive factors.
Skip Nav Destination
e-mail: frank.seehaus@annastift.de
e-mail: judith.emmerich@annastift.de
e-mail: b.l.kaptein@lumc.nl
e-mail: windhagen@annastift.de
e-mail: christof.hurschler@annastift.de
Article navigation
April 2009
Research Papers
Experimental Analysis of Model-Based Roentgen Stereophotogrammetric Analysis (MBRSA) on Four Typical Prosthesis Components
Frank Seehaus,
Frank Seehaus
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
e-mail: frank.seehaus@annastift.de
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germany
Search for other works by this author on:
Judith Emmerich,
Judith Emmerich
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
e-mail: judith.emmerich@annastift.de
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germany
Search for other works by this author on:
Bart L. Kaptein,
Bart L. Kaptein
Department of Orthopaedics and Division of Image Processing, and Department of Radiology,
e-mail: b.l.kaptein@lumc.nl
Leiden University Medical Center
, P.O. Box 9600, 2300 RC Leiden, Netherlands
Search for other works by this author on:
Henning Windhagen,
Henning Windhagen
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
e-mail: windhagen@annastift.de
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germany
Search for other works by this author on:
Christof Hurschler
Christof Hurschler
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
e-mail: christof.hurschler@annastift.de
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germany
Search for other works by this author on:
Frank Seehaus
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germanye-mail: frank.seehaus@annastift.de
Judith Emmerich
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germanye-mail: judith.emmerich@annastift.de
Bart L. Kaptein
Department of Orthopaedics and Division of Image Processing, and Department of Radiology,
Leiden University Medical Center
, P.O. Box 9600, 2300 RC Leiden, Netherlandse-mail: b.l.kaptein@lumc.nl
Henning Windhagen
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germanye-mail: windhagen@annastift.de
Christof Hurschler
Department of Orthopaedics, Laboratory for Biomechanics and Biomaterials,
Hannover Medical School
, Anna-von-Borries-Strasse 1-7, 30625 Hannover, Germanye-mail: christof.hurschler@annastift.de
J Biomech Eng. Apr 2009, 131(4): 041004 (10 pages)
Published Online: February 2, 2009
Article history
Received:
April 22, 2008
Revised:
October 27, 2008
Published:
February 2, 2009
Citation
Seehaus, F., Emmerich, J., Kaptein, B. L., Windhagen, H., and Hurschler, C. (February 2, 2009). "Experimental Analysis of Model-Based Roentgen Stereophotogrammetric Analysis (MBRSA) on Four Typical Prosthesis Components." ASME. J Biomech Eng. April 2009; 131(4): 041004. https://doi.org/10.1115/1.3072892
Download citation file:
Get Email Alerts
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Related Articles
Design and Validation of a Machine for Reproducible Precision Insertion of Femoral Hip Prostheses for Preclinical Testing
J Biomech Eng (April,2000)
Design of a Dynamic Stabilization Spine Implant
J. Med. Devices (June,2009)
Human Joint Simulation Using LifeMOD Co-Simulation
J. Med. Devices (June,2008)
Design of an Endoreactor for the Cultivation of a Joint-Like-Structure
J. Med. Devices (June,2009)
Related Proceedings Papers
Related Chapters
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2
Application of Non-Linear Elastic Wave Spectroscopy (NEWS) to In Vitro Damage Assessment in Cortical Bone
Biomedical Applications of Vibration and Acoustics in Imaging and Characterizations
Computer Aided Oracle Bone Inscriptions Textual Research Based on Ontology
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3