This paper demonstrates how ambient vibration measurements at a limited number of locations can be effectively utilized to estimate parameters of a finite element model of a large-scale structural system involving a large number of elements. System identification using ambient vibration measurements presents a challenge requiring the use of special identification techniques, which can deal with very small magnitudes of ambient vibration contaminated by noise without the knowledge of input forces. In the present study, the modal parameters such as natural frequencies, damping ratios, and mode shapes of the structural system were estimated by means of appropriate system identification techniques including the random decrement method. Moreover, estimation of parameters such as the stiffness matrix of the finite element model from the system response measured by a limited number of sensors is another challenge. In this study, the system stiffness matrix was estimated by using the quadratic optimization involving the computed and measured modal strain energy of the system, with the aid of a sensitivity relationship between each element stiffness and the modal parameters established by the second-order inverse modal perturbation theory. The finite element models thus identified represent the actual structural system very well, as their calculated dynamic characteristics satisfactorily matched the observed ones from the ambient vibration test performed on a large-scale structural system subjected primarily to ambient wind excitations. It is noted that newly developed optical fiber accelerometers were used for this ambient vibration test. The dynamic models identified by this study will be used for design of an active mass damper system to be installed on this structure for suppressing its wind vibration.
Skip Nav Destination
Article navigation
December 1998
Technical Papers
Identification of a Dynamic System Using Ambient Vibration Measurements
M. Q. Feng,
M. Q. Feng
Department of Civil and Environmental Engineering, University of California, Irvine, CA 92697-2175
Search for other works by this author on:
J.-M. Kim,
J.-M. Kim
Department of Ocean Civil Engineering, Yosu National Fisheries University, 96-1 Dunduck-dong, Yosu, Chonnam 550-250, Korea
Search for other works by this author on:
H. Xue
H. Xue
Department of Mechanical and Production Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 0511
Search for other works by this author on:
M. Q. Feng
Department of Civil and Environmental Engineering, University of California, Irvine, CA 92697-2175
J.-M. Kim
Department of Ocean Civil Engineering, Yosu National Fisheries University, 96-1 Dunduck-dong, Yosu, Chonnam 550-250, Korea
H. Xue
Department of Mechanical and Production Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 0511
J. Appl. Mech. Dec 1998, 65(4): 1010-1021 (12 pages)
Published Online: December 1, 1998
Article history
Received:
July 7, 1997
Revised:
September 27, 1997
Online:
October 25, 2007
Citation
Feng, M. Q., Kim, J., and Xue, H. (December 1, 1998). "Identification of a Dynamic System Using Ambient Vibration Measurements." ASME. J. Appl. Mech. December 1998; 65(4): 1010–1021. https://doi.org/10.1115/1.2791895
Download citation file:
Get Email Alerts
Complex Flow Patterns in Compressible Viscoelastic Liquids: Blood Flow Through a Compliant Aorta
J. Appl. Mech (February 2025)
Extraction of Mechanical Properties of Shape Memory Alloys From Instrumented Spherical Indentation
J. Appl. Mech (February 2025)
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Related Articles
Bayesian Methods for Updating Dynamic Models
Appl. Mech. Rev (January,2011)
A New Low-Frequency Resonance Sensor for Low Speed Roller Bearing Monitoring
J. Vib. Acoust (February,2010)
Stochastic System Identification for Operational Modal Analysis: A Review
J. Dyn. Sys., Meas., Control (December,2001)
A New Mistuning Identification Method Based on the Subset of Nominal System Modes Method
J. Eng. Gas Turbines Power (February,2020)
Related Proceedings Papers
Related Chapters
Design of a Tri-Axial Accelerometer for Low Frequency Vibration
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Experimental and Statistical Study on the Noise Generated by Surface Defects of Bearing Rolling Bodies
Bearing and Transmission Steels Technology
Hydrodynamic Mass, Natural Frequencies and Mode Shapes
Flow-Induced Vibration Handbook for Nuclear and Process Equipment