The problem considered here is the antiplane response of an elastic solid containing a half-plane crack subjected to suddenly applied concentrated point forces acting at a finite distance from the crack tip. A fundamental solution for the dynamic dislocation is obtained to construct the dynamic fracture problem containing a characteristic length. Attention is focused on the time-dependent full-field solutions of stresses and stress intensity factor. It is found that at the instant that the first shear wave reaches the crack tip, the stress intensity factor jumps from zero to the appropriate static value. The stresses will take on the appropriate static value instantaneously upon arrival of the shear wave diffracted from the crack tip, and this static value is thereafter maintained. The dynamic stress intensity factor of a kinked crack from this stationary semi-infinite crack after the arrival of shear wave is obtained in an explicit form as a function of the kinked crack velocity, the kink angle, and time. A perturbation method, using the kink angle as the perturbation parameter, is used. If the maximum energy release rate is accepted as the crack propagation criterion, then the crack will propagate straight ahead of the original crack when applying point load at the crack face.
Skip Nav Destination
Article navigation
September 1991
Research Papers
Transient Analysis for Antiplane Crack Subjected to Dynamic Loadings
Chien-Ching Ma,
Chien-Ching Ma
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10764
Search for other works by this author on:
Ying-Chung Hou
Ying-Chung Hou
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10764
Search for other works by this author on:
Chien-Ching Ma
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10764
Ying-Chung Hou
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan 10764
J. Appl. Mech. Sep 1991, 58(3): 703-709 (7 pages)
Published Online: September 1, 1991
Article history
Received:
March 12, 1990
Revised:
June 15, 1990
Online:
March 31, 2008
Citation
Ma, C., and Hou, Y. (September 1, 1991). "Transient Analysis for Antiplane Crack Subjected to Dynamic Loadings." ASME. J. Appl. Mech. September 1991; 58(3): 703–709. https://doi.org/10.1115/1.2897251
Download citation file:
Get Email Alerts
On CFRP Honeycomb Mechanical Metamaterials Under Out-of-Plane Crushing
J. Appl. Mech (June 2025)
The Roles of Size, Packing, and Cohesion in the Emergence of Force Chains in Granular Packings
J. Appl. Mech (June 2025)
Strain–Stress Estimation of Vibrational Beam and Plate Using Radiative Energy Transfer Method
J. Appl. Mech (June 2025)
Related Articles
Transient Analysis of a Subsonic Propagating Interface Crack Subjected to Antiplane Dynamic Loading in Dissimilar Isotropic Materials
J. Appl. Mech (September,1997)
The Dynamic Stress Intensity Factor Due to Arbitrary Screw Dislocation Motion
J. Appl. Mech (June,1983)
A Diffraction Problem and Crack Propagation
J. Appl. Mech (March,1967)
Crack Propagation Analysis by Finite Differences
J. Appl. Mech (December,1973)
Related Chapters
On the Process of Subsurface Fatigue Crack Initiation in Ti-6Al-4V
Fatigue Mechanisms
Introductory Information
The Stress Analysis of Cracks Handbook, Third Edition
Analysis of Radially Cracked Ring Segments Subject to Forces and Couples
Developments in Fracture Mechanics Test Methods Standardization